Formation of Zr-contained Amorphous Alloy Films by Magnetron Co-sputtering

Abstract

In order to explore the application of magnetron co-sputtering in fabricating the amorphous alloy, Zr-contained amorphous films were prepared by this technique and investigated by scanning electron microscope, energy disperse spectroscopy and X-ray diffraction. The results show that the co-sputtered films are in fully amorphous state or with amorphous-nanocrystalline structure. The XRD patterns of the Zr-Cu and Zr-Ni amorphous films exhibit a double-peak phenomenon. There is a shift of diffusive peak with changing the sputtering current which is possibly attributed to the change of Zr-Ni and Zr-Cu intermetallic like short range orders. In addition, Zr-Cu-Ni ternary co-sputtered films have a sharper peak at high angle. The sputtering yield of element during co-sputtering ranks as Cu>Ni>Zr, which can be ascribed to the contribution of melting and boiling temperature, atomic size and electrical conductivity of elements.

Keywords

amorphous film / co-sputtering deposition / short-range order

References

[1] Inoue A. Stabilization of Metallic Supercooled Liquid and Bulk Amorphous Alloys[J]. Acta Materialia, 2000, 48: 279-306.

[2] Johnson W L. Bulk Amorphous Metal-An Emerging Engineering Material[J]. JOM-Journal of the Minerals Metals & Materials Society, 2002, 54: 40-43.

[3] Schultz L, Eckert J. Glassy Metals III[M], 1994 Berlin: Springer Varlag.

[4] Guo L Y, Geng S N, Pang J, et al. Structural Transformation and Property Improvement of Fe₇₈Si₉B₁₃ Amorphous Ribbon by Pulsed Laser Processing[J]. Materials & Design, 2018, 160: 538-548.

[5] Jia C G, Pang J, Pan S P, et al. Tailoring the Corrosion Behavior of Fe-based Metallic Glasses through Inducing Nb-triggered Netlike Structure[J]. Corrosion Science, 2019, 147: 94-107.

[6] Wang X, Pang J, Guo L Y, et al. Thermal Analysis of Directional Pressure Annealed Fe₇₈Si₉B₁₃ Amorphous Ribbons[J]. Thermochimica Acta, 2018, 661: 67-77.

[7] Ristič R, StubičAr M, Babić E. Correlation between Mechanical, Thermal and Electronic Properties in Zr-Ni, Cu Amorphous Alloys[J]. Philosophical Magazine, 2007, 87: 5 629-5 637.

[8] Basu J, Murty B S, Ranganathan S. Glass Forming Ability: Miedema Approach to (Zr, Ti, Hf)-(Cu, Ni) Binary and Ternary Alloys[J]. Journal of Alloys and Compounds, 2008, 465: 163-172.

[9] Chen C J, Huang J C, Chou H S, et al. On the Amorphous and Nanocrystalline Zr-Cu and Zr-Ti Co-sputtered Thin Films[J]. Journal of Alloys and Compounds, 2009, 483: 337-340.

[10] Jing Q, Xu Y, Zhang X Y, et al. Zr-Cu Amorphous Films Prepared by Magnetron Co-sputtering Deposition of Pure Zr and Cu[. Chinese Physics Letters, 2009, 26: 086 109-086 112.

[11] Marshall A F, Walmsley R G, Stevenson D A. Crystallization of an Amorphous Cu₈₈Zr₂₀ Alloy Prepared by Magnetron Sputter Deposition[J]. Materials Science and Engineering, 1984, 63: 215-227.

[12] Luo S, Yan B X, Shen J. Enhanced Photoelectric Property of Mo-C Codoped TiO₂ Films Deposited by RF Magnetron Cosputtering[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2017, 32: 223-228.

[13] Li B J, Huang L J, Zhou M, et al. Preparation and Spectral Analysis of Gold Nanoparticles using Magnetron Sputtering and Thermal Annealing[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2014, 29: 651-655.

[14] Liu C Y, He F, Yan N N, et al. Influence of Deposition Pressure on Properties of ZnO: Al Films Fabricated by RF Magnetron Sputtering[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2016, 31: 1 235-1 239.

[15] Swann S. Magnetron Sputtering[J]. Physics in Technology, 1988, 19: 67.

[16] Zalnezhad E. Effect of Structural Evolution on Mechanical Properties of ZrO2 Coated Ti-6Al-7Nb-biomedical Application[J]. Applied Surface Science, 2016, 370: 32-39.

[17] Baradaran S, Zalnezhad E, Basirun W J, et al. Statistical Optimization and Fretting Fatigue Study of Zr/ZrO₂ Nanotubular Array Coating on Ti-6Al-4V[J]. Surface and Coatings Technology, 2014, 258: 979-990.

[18] Carcia P F, Mclean R S, Reilly M H, et al. Transparent ZnO Thin-film Transistor Fabricated by RF Magnetron Sputtering[J]. Applied Physics Letters, 2003, 82: 1 117-1 119.

[19] Dudonis J, Brucas R, Miniotas A. Synthesis of Amorphous Zr-Cu Alloys by Magnetron Co-sputtering[J]. Thin Solid Films, 1996, 275: 164-167.

[20] Xu Y. Study on the Preparation and Crystallization Process of Zr-Cu Amorphous Alloy Thin Films, 2005 Qinghuangdao: Yanshan University.

[21] Li Y, Guo Q, Kalb J A, et al. Matching Glass-Forming Ability with the Density of the Amorphous Phase[J]. Science, 2008, 322: 1 816-1 819.

[22] Chou H S, Huang J C, Lai Y H, et al. Amorphous and Nanocrystalline Sputtered Mg-Cu Thin Films[J]. Journal of Alloys and Compounds, 2009, 483: 341-345.

[23] Miyazaki H. Fabrication of YbAl 3 Film via Annealing Amorphous Yb-Al Film Deposited by RF Magnetron Sputtering[J]. Vacuum, 2008, 83: 416-418.

[24] Mattern N, KüHn U, Gebert A, et al. Microstructure and Thermal Behavior of Two-phase Amorphous Ni-Nb-Y Alloy[J]. Scripta Materialia, 2005, 53: 271-274.

[25] Antonian Z, Tu G H, Strom-Olsen J O. Crystallization Characteristics of Ni-Zr Metallic Glasses from Ni₂₀Zr₈₀ to Ni₇₀Zr₃₀[J]. Journal of Applied Physics, 1983, 54: 3 111-3 116.

[26] Sigmund P. Theory of Sputtering. I. Sputtering Yield of Amorphous and Polycrystalline Targets[J]. Physical Review, 1969, 184: 383-315.

[27] Dean J A. Lange’s Handbook of Chemistry[M], 1999 New York: McGraw-Hill, Inc..