Modeling and Software Development of the Interfacial Transition Zone of Ellipsoidal Aggregate in Cement-Based Composites

Abstract

The interfacial transition zone (ITZ) between the aggregates and the bulk paste is the weakest zone of ordinary concrete, which largely determines its mechanical and transporting properties. However, a complete understanding and a quantitative modeling of ITZ are still lacking. Consequently, an integrated modeling and experimental study were conducted. First, the theoretical calculation model of the ITZ volume fraction about the rotary ellipsoidal aggregate particles was established based on the nearest surface function formula. Its calculation programs were written based on Visual Basic 6.0 language and achieved visualization and functionalization. Then, the influencing factors of ITZ volume fraction of the ellipsoidal aggregate particles and the overlapping degree between the ITZ were systematically analyzed. Finally, the calculation models of ITZ volume fraction on actual ellipsoidal aggregate were given, based on cobblestones or pebbles particles with naturally ellipsoidal shape. The results indicate that the calculation model proposed is highly reliable.

Keywords

interfacial transition zone (ITZ) / cement-based composites / ellipsoidal aggregate / volume fraction / visualization / software development

References

[1] Kong L J, Hou L R, Wang Y H, et al. Investigation of the Interfacial Transition Zone between Aggregate-Cement Paste by AC Impedance Spectroscopy[J]. J. Wuhan University of Technology -Materials Science Edition, 2016, 31(4): 1-7.

[2] Ollivier J P, Maso J C, Bourdette B. Interfacial Transition Zone in Concrete[J]. Advanced Cement Based Materials, 1995, 2(1): 31-33.

[3] Garboczi E J. Computational Materials Science of Cement-Based Materials[J]. Materials and Structures, 1993, 26(4): 191-195.

[4] Scrivener K L, Nemati K M. The Percolation of Pore Space in the Cement Paste/Aggregate Interfacial Zone[J]. Cement and Concrete Research, 1996, 26(1): 35-40.

[5] Liu Z Y, Chen W W, Zhang Y S, et al. A Three-Dimensional Multiscale Method to Simulate the Ion Transport Behavior of Cement-Based Materials[J]. Construction and Building Materials, 2016, 120: 3 998-4 005.

[6] Geng G Q, Myers R J, Li J Q, et al. Aluminum-induced Dreierketten Chain Cross-links Increase the Mechanical Properties of Nanocrystalline Calcium Aluminosilicate Hydrate[J]. Scientific Reports, 2017, 7: 44 032.

[7] Hussain R R, Ishada T. Investigation of Volumetric Effect of Coarse Aggregate on Corroding Steel Reinforcement at the Interfacial Transition Zone of Concrete[J]. KSCE Journal of Civil Engineering, 2010, 15(1): 153-160.

[8] Xu W X, Chen H S, Lv Z. A 2D Elliptical Model of Random Packing for Aggregates in Concrete[J]. J. Wuhan University of Technology-Materials Science Edition, 2010, 25(4): 717-720.

[9] Geng G Q, Taylor R, Bae S, et al. Atomic and Nano-scale Characterization of a 50-Year-Old Hydrated C₃S Paste[J]. Cement and Concrete Research, 2015, 77(11): 36-46.

[10] Sicat E, Gong F, Ueda T, et al. Experimental Investigation of the Deformational Behavior of the Interfacial Transition Zone (ITZ) in Concrete During Freezing and Thawing cycles[J]. Construction & Building Materials, 2014, 65(5): 122-131.

[11] Pang B, Zhou Z, Cheng X, et al. >ITZ Properties of Concrete with Carbonated Steel Slag Aggregate in Salty Freeze-thaw Environment[J]. Construction & Building Materials, 2016, 114: 162-171.

[12] Garboczi E J, Bentz D P. Multiscale Analytical. Numerical Theory of the Diffusivity of Concrete[J]. Advanced Cement Based Materials, 1998, 8(2): 77-88.

[13] Garboczi E J, Bentz D P. Analytical Formulas for Interfacial Transition Zone Properties[J]. Advn. Cem. Bas. Mat., 1997, 6(3–4): 99-108.

[14] Garboczi E J, Bentz D P. Digital Simulation of the Aggregate-Cement Paste Interfacial Zone in Concrete[J]. Materials Research, 1991, 6: 196-201.

[15] Sun G W, Sun W, Zhang Y S, et al. Quantitative Analysis and Affecting Factors of the Overlapping Degree of Interfacial Transition Zones between Neighboring Aggregates in Concrete[J]. J. Wuhan University of Technology -Materials Science Edition, 2011, 26(1): 147-153.

[16] Chen H S, Sun W, Stroeven P. Quantitative Solution of Volume Fraction of Interface in Cementitious Composites[J]. Acta Materiae Compositae Sinica, 2006, 23(2): 133-142.

[17] Zheng J J, Guo Z Q, Huang X F, et al. ITZ Volume Fraction in Concrete with Spheroidal Aggregate Particles and Application: Part II. Prediction of the Chloride Diffusivity of Concrete[J]. Magazine of Concrete Research, 2011, 63(7): 483-491.

[18] Zheng J J, Zhou X Z, Jiang L, et al. Area Fraction and Percolation Threshold of ITZ in Concrete and Its Application (I)-Computer Simulation[J]. Building Materials, 2006, 9(3): 761-772.

[19] Lu B L, Torquato S. Nearest Surface Distribution Functions for Polydispersed Particle Systems[J]. Phys. Rev. A, 1992, 45(8): 5 530-5 544.

[20] Niu L C. Modeling Ion Diffusion-Reaction Behavior in Concrete Subjected to Aggression Couplings of Mechanical Loadings and Sulfate, 2012 Nanjing: Nanjing University of Science & Technology. (in Chinese)

[21] Zheng J J, Xiong F F, Wu Z M, et al. A Numerical Algorithm for the ITZ Area Fraction in Concrete with Elliptical Aggregate Particles[J]. Magazine of Concrete Research, 2009, 61(2): 109-117.