Tribological Properties of Magnesium Ion-exchanged α-Zirconium Phosphate as a Solid Lubricant Additive in Lithium Grease

Abstract

Magnesium ion-exchanged a-zirconium phosphates (Mg-α-ZrP) with particle sizes of 600 and 80 nm were prepared through the sealed ion-exchange and one-step hydrothermal synthesis methods, respectively. It was found that larger particles of Mg-α-ZrP had a higher load-carrying capacity than that of smaller particles, whereas smaller Mg-α-ZrP particles had better anti-wear properties than that of larger Mg-α- ZrP particles under mild loads. The correlation between the particle size of the sample and the surface roughness of the friction pair thus seems to be a key factor influencing the performance.

Keywords

layered α-zirconium phosphate / ion-exchange / tribological properties / magnesium / particle size

References

[1] Bloch H P. Practical Lubrication for Industrial Facilities[M], 2009 Lilburn: The Fairmont Press, Inc..

[2] Lugt P M. Modern Advancements in Lubricating Grease Technology [J]. Tribol. Int., 2016, 97: 467-477.

[3] Dowson D, Taylor C M. Lubricants and Lubrication[M], 2007 New Jersey: John Wiley & Sons, Inc..

[4] Bartz W J. Solid Lubricant Additives–Effect of Concentration and other Additives on Anti–wear Performance[J]. Wear, 1971 421-432.

[5] Zhang Z F, Liu W M, Xue Q J. Tribological Properties and Lubricating Mechanisms of the Rare Earth Complex as a Grease Additive[J]. Wear, 1996, 1–2: 80-85.

[6] Liu L, Chen Z F, Wei H B, et al. Ionothermal Synthesis of Layered Zirconium Phosphates and Their Tribological Properties in Mineral Oil[J]. Inorg. Chem., 2010, 49(18): 8 270-8 275.

[7] Chen Z F, Zhang X S, Xu H, et al. Tribological Characteristics of Combined Layered Phosphate and Silicate Additives in Mineral Oil[J]. Tribol. Lett., 2011, 43(2): 197-203.

[8] He X L, Xiao H P, Choi H, et al. α–Zirconium Phosphate Nanoplatelets as Lubricant Additives[J]. Colloids Surf., A, 2014, 452: 32-38.

[9] Xiao H P, Dai W, Kan Y W, et al. Amine–intercalated α–Zirconium Phosphates as Lubricant Additives[J]. Appl. Surf. Sci., 2015 384-389.

[10] Zhang X S, Xu H, Zuo Z J, et al. Hydrothermal Synthesis of Copper Zirconium Phosphate Hydrate [Cu(OH)2Zr(HPO4)2·2H2O] and an Investigation of Its Lubrication Properties in Grease[J]. ACS Appl. Mater. Interfaces, 2013, 5: 7 989-7 994.

[11] Clearfield A, Smith S D. The Crystal Structure of Zirconium Phosphate and the Mechanism of Its Ion Exchange Behavior[J]. J. Colloid Interface Sci., 1968, 28: 325-330.

[12] Allulli S, Ferragina C, Ginestra A L, et al. Characterisation and Electronic Properties of Some Inorganic Ion Exchangers of the Zirconium Phosphate Type Containing Transition–metal[J]. J. C. S. Dalton, 1976 115-2 120.

[13] Clearfield A, Kalnins J M. On the Mechanism of Ion Exchange in Zirconium Phosphates–XIII Exchange of Some Divalent Transition Metal Ions on α–Zirconium Phosphate[J]. J. Inorg. Nucl. Chem., 1976, 38: 849-852.

[14] Alberti G, Costantino U, Gupta J P. Crystalline Insoluble Acid Salts of Tetravalent Metals–XVIII Ion Exchange Properties of Crystalline Zr–NaH(PO4)2·5H2O Towards Alkali Metal Ions[J]. J. Inorg. Nucl. Chem., 1974, 36: 2 103-2 107.

[15] Alberti G, Costantino U, Gupta J P. Crystalline Insoluble Acid Salts of Tetravalent Metals–XIX: Na+–Catalyzed H+–Mg2+ and H+–Cs+ Ion Exchanges on α–Zirconium Phosphate[J]. J. Inorg. Nucl. Chem., 1974, 36: 2 109-2 114.

[16] Alberti G, Costantino U, Pelliccioni M. Crystalline Insoluble Acid Salts of Tetravalent Metals–XIII Ion Exchange of Crystalline Zirconium Phosphate with Alkaline Earth Metal Ions[J]. J. Inorg. Nucl. Chem., 1973, 35: 1 327-1 338.

[17] Zhang X S, Sun W C, Ma H J, et al. Investigation of the Tribological Properties of Two Different Layered Sodium Silicates Utilized as Solid Lubrication Additives in Lithium Grease[J]. Ind. Eng. Chem. Res., 2014, 53: 182-188.

[18] Bartz W J. Some Investigations on the Influence of Particle Size on the Lubricating Effectiveness of Molybdenum Disulfide[J]. Tribol. Trans., 1972, 15(3): 207-215.

[19] Reeves C J, Menezes P L, Lovell M R, et al. The Influence of Surface Roughness and Particulate Size on the Tribological Performance of Bio–based Multi–Functional Hybrid Lubricants[J]. Tribol. Int., 2015, 88: 40-55.