Enhanced Thermoelectric Performance of Non-equilibrium Synthesized Fe_0.4Co_3.6Sb_12-xGe _x Skutterudites via Randomly Distributed Multi-scaled Impurity Dots

Abstract

The p-type Ge doped Fe_0.4Co_3.6Sb_12-xGe _x skutterudites with multi-scaled impurity dots (500 nm-2 mm) were successfully prepared by using melt-quenching (MQ) and subsequent spark plasma sintering (SPS) technique. Compared with traditional method, the new technology significantly shortened the processing time from several days to less than 24 hours. The phase of impurity dots was demonstrated to be CoSb through analysis of X-ray diffraction (XRD) and energy-dispersive spectrum (EDS). Impurity dots were induced by Ge substitution of Sb in the non-equilibrium synthesized process. Due to the abandonment of the long reaction of annealing crystallization, a few of Ge atoms would fail to substitute Sb site of skutterudite in this non-equilibrium synthesized process, leading to that the multi-scaled impurity dots randomly distributed in the matrix of skutterudite Fe_0.4Co_3.6Sb_12-xGe _x. The combination of multi-scaled impurity dots scattering long wavelength heat-carrying phonons and the point defect scattering short and middle wavelength heat-carrying phonons dramatically made the 22.2% reduction of lattice thermal conductivity. As a result, compared with unsubstituted sample of Fe_0.4Co_3.6Sb₁₂, the maximum ZT value was increased by 30.5%. Thus, the two marked features of this new synthesis process, the shortened preparation time and the enhanced thermoelectric performance, would make a promising commercial application in the future.

Keywords

multi-scaled impurity dots / Sb site substitution / p-type / thermoelectric transport properties