Impact of rare earth element la on microstructure and hot crack resistance of ADC12 alloy

Abstract

The impact of rare earth element La on the microstructure and hot crack resistance of ADC12 alloy was analyzed. The additive amount of La was 0%, 0.3 wt%, 0.6 wt% and 0.9 wt%, respectively. The results showed that, with the increase of the additive amount from 0% to 0.6 wt%, the grain shape of α-Al gradually varied from developed dendritic crystal into fine dendritic crystal, equiaxed crystal and spheroidal crystal; eutectic silicon varied from needle-like or tabular shape into fine rod like shape; the hot crack force of the alloy also gradually decreased. However, when the additive amount of La reached 0.9 wt%, the excessive amount of rare earth elements was segregated within grain boundary area, forming intermetallic compounds. Therefore, the grain size of α-Al, eutectic silicon and the hot crack force of the alloy all increased. In the case that the additive amount of La reached 0.6 wt%, the best metamorphism effect and most excellent hot cracking resistance capacity of alloy were presented. The poisoning effect of rare earth element on eutectic silicon and the constitutional supercooling caused by rare earth element were the major causes for alloy modification, alloy refinement, and the main reasons for the increased hot cracking resistance.

Keywords

ADC12 alloy / rare earth / microstructure / hot crack

References

[1] Chiang K T, Liu N M, Tsai T C. Modeling and Analysis of the Effects of Processing Parameters on the Performance Characteristics in the High Pressure Die Casting Process of Al-Si Alloys[J]. International Journal of Advanced Manufacturing Technology, 2009, 41(11): 1076-1084.

[2] Khalifaa W, Tsunekawab Y, Okumiyab M. Effect of Ultrasonic Treatment on the Fe-intermetallic Phases in ADC12 Die Cast Alloy[J]. J. Mater. Process. Technol., 2010, 210(15): 2178-2187.

[3] Wang Z Y, Ji Z S, Hu M L, et al. Evolution of the Semi-solid Microstructure of ADC12 Alloy in a Modified SIMA Process[J]. Mater. Charact., 2011, 62(10): 925-930.

[4] Hatami N, Babaei R, Dadashzadeh M, et al. Modeling of Hot-tearing Formation During Solidification[J]. J. Mater. Process. Technol., 2008, 205(1-3): 506-513.

[5] LIN S, ALIRAVCI C, PEKGULERYUZ M O. Hot-Tear Susceptibility of Aluminum Wrought Alloys and the Effect of Grain Refining[J]. Metall. Mater. Trans. A, 2007, 5: 1056-1068.

[6] Wen J, Wang Y S, Wang Q D, et al. Research Development of Hot Tear Mechanism for Cast Alloys[J]. Special Casting & Nonferrous alloys, 2000, 2: 48-50.

[7] Eskin D G, Katgerman L. Mechanical Properties in the Semi-solid State and Hot-tearing of Aluminum Alloys[J]. Prog. Mater Sci., 2004, 49(5): 629-711.

[8] Eskin D G, Katgerman L. A Quest for a New Hot-tearing Criterion[J]. Metall. Mater. Trans. A, 2007, 38A(7): 1511-1519.

[9] Li S, Sadayappan K, Apelian D. Characterisation of Hot Tearing in Al Cast Alloys: Methodology and Procedures[J]. Int. J. Cas. Metal. Res., 2011, 24(2): 88-95.

[10] D’Elia F, Ravindran C. Influence of Grain Refinement on Hot Tearing in B206 and A319 Aluminum Alloys[J]. Trans. Indian Inst. Met., 2009, 62(4-5): 315-319.

[11] Li M, Wang H W, Wei Z J, et al. The Effect of Y on the Hot-tearing Resistance of Al-5 wt% Cu Based Alloy[J]. Mater. Des., 2010, 31: 2483-2487.

[12] Li S M, Sadayappan K, Apelian D. Role of Grain Refinement in the Hot Tearing of Cast Al-Cu Alloy[J]. Metall. Mater. Trans. B, 2013, 6: 614-623.

[13] HU Z, Yan H, RAO Y S. Effects of Samarium Addition on Microstructure and Mechanical Properties of As-cast Al_Si_Cu Alloy[J]. Trans. Nonferrous Met. Soc. China, 2013, 23: 3228-3234.

[14] Hu X W, Jiang F G, Ai F R, et al. Effects of Rare Earth Er Additions on Microstructure Development and Mechanical Properties of Die-cast ADC12 Aluminum Alloy[J]. J. Alloys Compd., 2012, 538: 21-27.

[15] Ning Y S, Zhou X M, Dai H. Metastable Extension of Solid Solubility of Rare Earth Elements in Al[J]. Acta Metall. Sin., 1992, 3: 96-99.

[16] Huang X, Yan H. Effect of Trace La Addition on the Microstructure and Mechanical Property of As-cast ADC12 Al-Alloy[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2013, 2(28): 202-205.

[17] HU H Q. Principle of Metal Solidification[M]. 2000 Beijing: China Machine Press.