Effect of chromium micro-alloying on the corrosion behavior of a low-carbon steel rebar in simulated concrete pore solutions

Dan Song , Jinyang Jiang , Wei Sun , Han Ma , Jianchun Zhang , Zhaojun Cheng , Jinghua Jiang , Zhiyong Ai

Journal of Wuhan University of Technology Materials Science Edition ›› 2017, Vol. 32 ›› Issue (6) : 1453 -1463.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2017, Vol. 32 ›› Issue (6) : 1453 -1463. DOI: 10.1007/s11595-017-1768-6
Metallic Materials

Effect of chromium micro-alloying on the corrosion behavior of a low-carbon steel rebar in simulated concrete pore solutions

Author information +
History +
PDF

Abstract

A new low-cost corrosion-resistant rebar (HRB400R) was designed and fabricated by chromium micro-alloying. The effects of Cr on the passivation and corrosion behavior of this rebar in the simulated concrete pore solutions were studied systematically, and its improved corrosion resistance was revealed. In the Cl--free saturated Ca(OH)2 solution, the HRB400R rebar presented nearly the same passive film and similar passivation ability compared to the common carbon steel rebar. In the long-term immersion corrosion test in the Cl--contained Ca(OH)2 solution, the HRB400R rebar presented improved corrosion resistance and obvious longer passivation-maintaining period. Micro-alloying of Cr element in the rebar matrix enhanced its corrosion resistance against Cl--attack and retarded the corrosion initiation in the matrix. In the alkaline NaCl salt spraying test, the HRB400R rebar also presented obviously lower mass-loss rate. The enrichment of Cr element in the rust layer improved its retardant effect to the penetration of aggressive medium, and decreased the corrosion propagation rate of the rebar.

Keywords

Cr micro-alloying / corrosion-resistant rebar / improved corrosion resistance / simulated concrete pore solutions

Cite this article

Download citation ▾
Dan Song, Jinyang Jiang, Wei Sun, Han Ma, Jianchun Zhang, Zhaojun Cheng, Jinghua Jiang, Zhiyong Ai. Effect of chromium micro-alloying on the corrosion behavior of a low-carbon steel rebar in simulated concrete pore solutions. Journal of Wuhan University of Technology Materials Science Edition, 2017, 32(6): 1453-1463 DOI:10.1007/s11595-017-1768-6

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Ahmad S. Reinforcement Corrosion in Concrete Structures, Its Monitoring and Service Life Prediction - A Review[J]. Cem. Concr. Compos., 2003, 25: 459-471.

[2]

Angst U, Elsener B, Larsen CK, et al. Critical Chloride Content in Reinforced Concrete- A Review[J]. Cem. Concr. Res., 2009, 39: 1 122-1 138.

[3]

Vedalakshmi R, Rajagopal K, Palaniswamy N. Durability Performance of Rebar Embedded in Chloride Admixed Blended Cement Concretes[J]. Corros. Eng. Sci. Technol., 2011, 46: 256-270.

[4]

Pradhan B, Bhattacharjee B. Rebar Corrosion in Chloride Environment[J]. Build. Mater., 2011, 25: 2565-2575.

[5]

Cheng A, Huang R, Wu JK, et al. Effect of Rebar Coating on Corrosion Resistance and Bond Strength of Reinforced Concrete[J]. Constr. Build. Mater., 2005, 19: 404-412.

[6]

Gastaldi M, Bertolini L. Effect of Temperature on The Corrosion Behaviour of Low-nickel Duplex Stainless Steel Bars in Concrete[J]. Cem. Concr. Res., 2014, 56: 52-60.

[7]

Vedalakshmi R, Kumar K, Raju V, et al. Effect of Prior Damage on the Performance of Cement Based Coatings on Rebar: Macrocell Corrosion Studies[J]. Cem. Concr. Res., 2000, 22: 417-421.

[8]

Paredes EC, Bautista A, Alvarez SM, et al. Influence of The Forming Process of Corrugated Stainless Steels on Their Corrosion Behaviour in Simulated Pore Solutions[J]. Corros. Sci., 2012, 58: 52-61.

[9]

Chen Y, Yang ZM, Wang HM. Comprehensive Properties of 400 MPa Grade Corrosion-Resistant Rebar[J]. J. iron. Steel Res. Int., 2012, 19: 48-52.

[10]

Singh JK, Singh DDN. The Nature of Rusts and Corrosion Characteristics of Low Alloy and Plain Carbon Steels in Three Kinds of Concrete Pore Solution with Salinity and Different pH[J]. Corros. Sci., 2012, 56: 129-142.

[11]

Standard Practice for Modified Salt Spray (Fog) Testing: ASTM Standard G85-09, 2009

[12]

Dehghanian C. Study of Surface Irregularity on Corrosion of Steel in Alkaline Media[J]. Cem. Concr. Res., 2003, 33: 1 963-1 966.

[13]

Ghods P, Isgor OB, Brown JR, et al. XPS Depth Profiling Study on The Passive Oxide Film of Carbon Steel in Saturated Calcium Hydroxide Solution and the Effect of Chloride on The Film Properties[J]. Appl. Surf. Sci., 2011, 257: 4 669-4 677.

[14]

Ghods P, Isgor OB, Bensebaa F, et al. Angle-resolved XPS Study of Carbon Steel Passivity and Chloride-induced Depassivation in Simulated Concrete Pore Solution[J]. Corros. Sci., 2012, 58: 159-167.

[15]

Luo H, Dong CF, Li XG, et al. The Electrochemical Behaviour of 2205 Duplex Stainless Steel in Alkaline Solutions with Different pH in the Presence of Chloride[J]. Electrochim. Acta, 2012, 64: 211-220.

[16]

Fajardo S, Bastidas DM, Criado M, et al. Corrosion Behaviour of A New Low-nickel Stainless Steel in Saturated Calcium Hydroxide Solution[J]. Constr. Build. Mater., 2011, 25: 4190-4196.

[17]

Li L, Dong CF, Xiao K, et al. Effect of pH on Pitting Corrosion of Stainless Steel Welds in Alkaline Salt Water[J]. Constr. Build. Mater., 2014, 68: 709-715.

[18]

Feng XG, Lu XY, Zuo Y, et al. The Passive Behaviour of 304 Stainless Steels in Saturated Calcium Hydroxide Solution under Different Deformation[J]. Corros. Sci., 2014, 82: 347-355.

[19]

Ghods P, Isgor OB, McRae GA, et al. Electrochemical Investigation of Chloride-induced Depassivation of Black Steel Rebar Under Simulated Service Conditions[J]. Corros. Sci., 2010, 52: 1649-1659.

[20]

Pradhan B, Bhattacharjee B. Performance Evaluation of Rebar in Chloride Contaminated Concrete by Corrosion Rate[J]. Constr. Build. Mater., 2009, 23: 2346-2356.

[21]

Wang ZD, Zeng Q, Wang L, et al. Corrosion of Rebar in Concrete Under Cyclic Freeze-thaw and Chloride Salt Action[J]. Constr. Build. Mater., 2014, 53: 40-47.

[22]

Zhang X, Yang SW, Zhang WH, et al. Influence of Outer Rust Layers on Corrosion of Carbon Steel and Weathering Steel during Wet-dry Cycles[J]. Corros. Sci., 2014, 82: 165-172.

[23]

Tamura H. The Role of Rusts in Corrosion and Corrosion Protection of Iron and Steel[J]. Corros. Sci., 2008, 50: 1872-1883.

[24]

Melchers RE. Long-term Corrosion of Cast Iron and Steel in Marine And Atmospheric Environments[J]. Corros. Sci., 2013, 68: 186-194.

[25]

Morcillo M, Díaz I, Chico B, et al. Weathering Steels: From Empirical Development to Scientific Design. A Review[J]. Corros. Sci., 2014, 83: 6-31.

[26]

Yamashita M, Shimizu T, Konishi H, et al. Structure and Protective Performance of Atmospheric Corrosion Product of Fe-Cr Alloy Film Analyzed by Mösbauer Spectroscopy and with Synchrotron Radiation X-rays[J]. Corros. Sci., 2003, 45: 381-394.

[27]

Qian YH, Ma CH, Niu D, et al. Influence of Alloyed Chromium on the Atmospheric Corrosion Resistance of Weathering Steels[J]. Corros. Sci., 2013, 74: 424-429.

[28]

Yamashita M, Miyuki H, Matsuda Y, et al. The Long Term Growth of the Protective Rust Layer Formed on Weathering Steel by Atmospheric Corrosion during A Quarter of A Century[J]. Corros. Sci., 1994, 36: 283-299.

[29]

Zhao YX, Yu Y, Wu YY, et al. Critical Thickness of Rust Layer at Inner and Out Surface Cracking of Concrete Cover in Reinforced Concrete Structures[J]. Corros. Sci., 2012, 59: 316-323.

AI Summary AI Mindmap
PDF

106

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/