Fatigue cracking characterization of high grade non-oriented electrical steels

Abstract

The fatigue behavior of 30WGP1600 non-oriented electrical steel, which is generally used in the motors for electrical vehicles, was investigated. The detailed microstructure and dislocation configurations of the fatigue specimens were examined by OM, SEM, and TEM. The test results showed that fatigue cracks were commonly initiated from the surface grain boundaries, crystals plane, and inclusions. The rapid fatigue crack propagation was characterized by transgranular cleavage fracture, while most transient fracture exhibited ductile tearing characteristics. After cyclic deformation of the non-oriented electrical steels, various dislocation structures, such as short and thick lines, veins, persistent slip bands, cells, and labyrinth, were observed.

Keywords

non-oriented electrical steel / fatigue behavior / crack initiation / crack propagation / dislocation structure

References

[1] Jung J-W, Lee B-H, et al. Mechanical Stress Reduction of Rotor Core of Interior Permanent Magnet Synchronous Motor[J]. IEEE Transactionson Magnetics, 2012, 48(2): 911-914.

[2] Ichiro T, Hiroyoshi Yashiki. Magnetic and Mechanical Properties of Newly Developed High-Strength Nonoriented Electrical Steel[J]. IEEE Transactions on Magnetics, 2014, 45: 1-10.

[3] John A R B, Nick W, Wang C-P, Farshid Sadeghi. Experimental and Numerical Investigation of Fatigue of Thin Tensile Specimen[J]. International Journal of Fatigue, 2012, 44: 116-130.

[4] Toshiyuki S, Yasumasa H, Shigeru M, et al. Statistical Fatigue Properties in the Large Strain Region of a Stainless Steel Sheet for Use as an Abrasion Strip on Helicopter Rotor Blades[J]. Int. J. Fatigue, 2005, 27: 273-281.

[5] Bolotin VV, Belousov IL. Early Fatigue Crack Growth as the Damage Accumulation Process[J]. Probab. Eng. Mech., 2001, 16: 279-287.

[6] Bolotin VV, Babkin AA, Belousov IL. Probabilistic Model of Early Fatigue Crack Growth[J]. Probab. Eng. Mech., 1998, 13: 227-232.

[7] Beniamin G, Akira U, et al. Dislocation-based Interpretation on the Effect of the Loading Frequency on the Fatigue Properities of JIS S15C Low Carbon Steel[J]. International Journal of Fatigue, 2015, 70: 328-341.

[8] Gaudin C, Feaugas X. Cyclic Creep Process in AISI 316L Stainless Steel in Terms of Dislocation Patterns and Internal Stresses[J]. Acta Materialia, 2004, 52: 3 097-3 110.

[9] Facheris G, Pham M-S, Janssens KGF, Holdsworth SR. Microscopic Analysis of the Influence of Ratcheting on the Evolution of Dislocation Structures Observed in AISI 316L Stainless Steel During Low Cycle Fatigue[J]. Materials Science & Engineering A, 2013, 587: 1-11.

[10] ZHANG Z-F, WANG Z-G, SHI C-Xu. Intergranular Fatigue Cracking Mechanisms[J]. Journal of the Graduate School of the Chinese Academy of Sciences, 2004, 21: 270-275.

[11] Man J, Petrenec M, Obrtlik K, Polak J. AFM and TEM Study of Cyclic Slip Locatization in Fatigued Ferritic X10CrAl24 Stainless Steel[J]. Acta Materialia, 2004, 52: 5 551-5 561.

[12] Man J, Obrtlik K, Blochwitz C, Polak J. Atomic Force Microscopy of Surface Relief in Individual Grains of Fatigued 316L Austenitic Stainless Steel[J]. Acta Materialia, 2002, 50: 3 767-3 780.

[13] Pham MS, Holdsworth SR. Dynamic Strain Ageing of AISI 316L During Cyclic Loading at 300 °C: Mechanism, Evolution, and Its Effects[J]. Materials Science & Engineering A, 2012, 556: 122-133.