Cracking propagation of hardening concrete based on the extended finite element method

Abstract

Self-deformation cracking is the cracking caused by thermal deformation, autogenous volume deformation or shrinkage deformation. In this paper, an extended finite element calculation method was deduced for concrete crack propagation under a constant hydration and hardening condition during the construction period, and a corresponding programming code was developed. The experimental investigation shows that initial crack propagation caused by self-deformation loads can be analyzed by this program. This improved algorithm was a preliminary application of the XFEM to the problem of the concrete self-deformation cracking during the hydration and hardening period. However, room for improvement exists for this algorithm in terms of matching calculation programs with mass concrete temperature fields containing cooling pipes and the influence of creep or damage on crack propagation.

Keywords

concrete / crack / self-deformation loads / extended finite element method

References

[1] Zhu ZY, Liu MZ, Qiang S, et al. Algorithm to Simulate Concrete Temperature Control Cooling Pipe Boundary Based on Heat Flux Integration[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2016, 32(9): 83-89.

[2] Luo M, Qian CX, Li RY, et al. Efficiency of Concrete Crack-healing Based on Biological Carbonate Precipitation[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2015, 30(06): 1255-1259.

[3] Guo YC, Wang X, Qian J S. Physical Model of Drying Shrinkage of Recycled Aggregate Concrete[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2015, 30(06): 1260-1267.

[4] Zhu ZY, Qiang S, Chen WM. A New Method Solving the Temperature Field of Concrete around Cooling Pipes[J]. Comput. Concrete, 2013, 11(5): 441-462.

[5] Zhu ZY, Qiang S, Zhen ZQ, et al. Determination of Parameters for Hydration Exothermic Model considering Concrete Temperature Duration by Genetic Algorithm[J]. Transactions of the Chinese Society of Agricultural Engineering (Transactions of the CSAE), 2013, 29(1): 86-92.

[6] Zhu ZY, Qiang S, Chen WM. A Model for Temperature Influence on Concrete Hydration Exothermic Rate (Part one: Theory and Experiment)[J]. Journal of Wuhan University of Technology(Materials Science Edition), 2014, 29(3): 540-545.

[7] Zhu ZY, Qiang S, Chen WM, et al. Improvement on Iteration Method Solving Temperature Field of Mass Concrete with Pipes[J]. Journal of Basic Science and Engineering, 2014, 22(3): 492-500.

[8] Zhu BF. On Pipe Cooling of Concrete Dams[J]. Journal of Hydraulic Engineering, 2010, 41(5): 505-513.

[9] Wang ZB, Xu DY, Zhu JJ. Thermal Damage Analysis for Mass Concrete Due to Temperature Change[J]. Journal of Hohai University, 2000, 28(4): 19-22.

[10] Sumarce D, Krasulja M. Damage of Plain Concrete due to Thermal Incompatibility of It’s Phases[J]. International Journal of Damage Mechanics, 1998, 7(2): 129-141.

[11] Belytscko T, Black T. Elastic Crack Growth in Finite Elements with Minimal Remeshing[J]. International Journal for Numerical Method in Engineering, 1999, 45: 601-620.

[12] Moës N, Dolvow J, Belytscko T. A Finite Element Method for Crack Growth without Remeshiing[J]. International Journal for Numerical Method in Engineering, 1999, 46: 131-150.

[13] Stolarska M, Chopp L, Moës N, et al. Modeling Crack Growth by Level Sets in the Extended Finite Element Method[J]. International Journal for Numerical Method in Engineering, 2001, 51(8): 943-960.

[14] Erdigan F, Sih G. On the Crack Extension in Plates under Plane Loading and Transverse Shear[J]. J. Basic Eng., 1963, 85(3): 519-527.

[15] Belytschko T. Dynamic Crack Propagation based on Loss of Hyperbolicity and a New Discontinuous Enrichment[J]. International Journal for Numerical Method in Engineering, 2003, 58: 1873-1905.

[16] Zuo Z, Hu Y, Li QB, et al. An Extended Finite Element Method for Pipe-embedded Plane Thermal Analysis[J]. Finite Elements in Analysis and Design, 2015, 102/103: 52-64.

[17] Himanshu P, Akhilendra S. Numerical Simulation of Bi-material Interfacial Cracks Using EFGM and XFEM[J]. International Journal of Mechanics and Materials in Design, 2012, 8(1): 9-36.

[18] Jiang Y, Tay TE, Chen L, et al. An Edge-based Smoothed XFEM for Fracture in Composite Materials[J]. International Journal of Fracture, 2013, 179(1): 179-199.

[19] Elena B. XFEM with Equivalent Eigenstrain for Matrix–inclusion Interfaces[J]. Computational Mechanics, 2014, 53(5): 893-908.