Laser-induced damage of 355 nm high-reflective mirror caused by nanoscale defect

Abstract

Al₂O₃/SiO₂ multilayer high-reflective (HR) mirrors at 355 nm were prepared by electron beam evaporation, and post-irradiated with Ar/O mixture plasma. The surface defect density, reflective spectra, and laser-induced damage characteristics were measured using optical microscopy, spectrophotometry, a damage testing system, and scanning electron microscopy (SEM), respectively. The results indicated that moderate-time of irradiation enhanced the laser-induced damage threshold (LIDT) of the mirror, but prolonged irradiation produced surface defects, resulting in LIDT degradation. LIDT of the mirrors initially increased and subsequently decreased with the plasma processing time. SEM damage morphologies of the mirrors revealed that nanoscale absorbing defects in sub-layers was one of the key factors limiting the improvement of LIDT in 355 nm HR mirror.

Keywords

laser-induced damage / plasma treatment / defect

References

[1] Hogan W J, Bangerter R, Kulcinski G L. Energy from Inertial Fusion[J]. Physics Today, 1992, 45: 42-50.

[2] Yuan L, Zhao Y, Shang G Q, et al. Comparison of Femtosecond and Nanosecond Laser-induced Damage in HfO₂ Single-layer Film and HfO₂-SiO₂ High Reflector[J]. J. Opt. Soc. Am. B, 2007, 24(3): 538-543.

[3] Andre B, Ravel G. High Laser Induced Damage Threshold Coatings for High Power Lasers[C]. Lasers and Electro-Optics, CLEO ‘99, 1999

[4] Zhu M P, Shao J D, Yi K, et al. Research on the Laser Damage Performance of High Reflection Coatings at 355 nm[C]. Proc. SPIE 8786, Pacific Rim Laser Damage 2013: Optical Materials for High Power Lasers, 2013

[5] Allenspacher P, Riede W, Wernham D, et al. Vacuum Laser Damage Test Bench[C]. Proc. SPIE 5991, Laser-Induced Damage in Optical Materials, 2005

[6] National AeronauticsSpace Administration Langley Research Center. Laser-induced Damage Threshold and Certification Procedures for Optical Materials[R]. 1997 Virginia: NASA.

[7] Wu S G, Tian G L, Xia Z L, et al. Influence of Negative ion Element Impurities on Laser Induced Damage Threshold of HfO₂ Thin Film[J]. Appl. Surf. Sci., 2006, 253(3): 1111-1115.

[8] Reichling M, Bodemann A, Kaiser N. Defect Induced Laser Damage in Oxide Multilayer Coatings for 248 nm[J]. Thin Solid Films, 1998, 320(2): 264-279.

[9] Tian G L, Huang J B, Wang T, et al. Microstructure and Laser-induced Damage Threshold of ZrO₂ Coatings Dependence on Annealing Temperature[J]. Appl. Surf. Sci., 2005, 239(2): 201-208.

[10] Ling X L, Zhao Y A, Li D W, et al. Laser Conditioning of High-reflective and Anti-reflective Coatings in Vacuum Environments[J]. Opt. Commun., 2010, 283(13): 2728-2731.

[11] Zhang D P, Shao J D, Zhang D W, et al. Employing Oxygen-plasma Post Treatment to Improve the Laser Induced Threshold of ZrO₂ Films Prepared by the Electron Beam Evaporation Method[J]. Opt. Lett., 2004, 29(24): 2870-2872.

[12] Wang C J, Jin Y X, Zhang D P, et al. A Comparative Study of the Influence of Different Post-treatment Methods on the Properties of HfO₂ Single Layers[J]. Opt. Laser Technol., 2009, 41(5): 570-573.

[13] International organization for Standardization. Lasers and Laser-related Equipment-Determination of Laser-induced Damage Threshold of Optical Surfaces-Part I: 1-on-1 Test[S].ISO 11254–1, 2000 2000

[14] Kiang Y C, Lang R W. Measuring Focused Gaussian Beam Spot Sizes: A Practical Method[J]. Appl. Opt., 1983, 22(9): 1296-1297.

[15] Zhang D P, Shao J D, Zhao Y A, et al. Laser-induced Damage Threshold of ZrO₂ Thin Films Prepared at Different Oxygen Partial Pressures by Electron-beam Evaporation[J]. J. Vac. Sci. Technol. A, 2005, 23: 197.

[16] Starbov N, Starbov K. Columnar Architectured Thin Films-Deposition, Microstructure and Related Properties[J]. J. Optoelectron. Adv. Mater., 2009, 11: 1093.

[17] Papernov S, Shin E, Murray T, et al. 355 nm Absorption in HfO₂ and SiO₂ Monolayers with Embedded Hf Nanoclusters Studied Using Photothermal Heterodyne Imaging[C]. Proc. SPIE 8530, Laser-Induced Damage in Optical Materials, 2012