Influence of heat treatment temperature on microstructure and bonding of TiO2 film coated on diamond particles surface

Xiaopan Liu , Weibing Kong , Haiyan Xiao , Hao Tang , Long Wan , Weida Hu , Wei Wang

Journal of Wuhan University of Technology Materials Science Edition ›› 2017, Vol. 32 ›› Issue (5) : 1008 -1012.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2017, Vol. 32 ›› Issue (5) : 1008 -1012. DOI: 10.1007/s11595-017-1703-x
Advanced Materials

Influence of heat treatment temperature on microstructure and bonding of TiO2 film coated on diamond particles surface

Author information +
History +
PDF

Abstract

TiO2 films were coated on the surface of diamond particles using a sol-gel method. The effects of heat treatment temperature on the morphology, phase composition and chemical bond of diamond particles coated with TiO2 films were investigated through SEM, TEM, X-ray diffraction analysis, Raman spectroscopy, FTIR, and XPS. The results showed that when being heat-treated at 600 °C, the amorphous TiO2 film transfered to the anatase film which bonded well with diamond substrate. Meanwhile, the Ti-O-C bond formed between TiO2 film and diamond substrate. When being heat-treated at 800 °C, TiO2 film was still anatase, and partial diamond began to graphitize. The graphitizated carbon could also form the Ti-O-C bond with TiO2 film, although TiO2 film would tend to crack in this case.

Keywords

diamond / TiO2 film / heat treatment temperature / chemical bond

Cite this article

Download citation ▾
Xiaopan Liu, Weibing Kong, Haiyan Xiao, Hao Tang, Long Wan, Weida Hu, Wei Wang. Influence of heat treatment temperature on microstructure and bonding of TiO2 film coated on diamond particles surface. Journal of Wuhan University of Technology Materials Science Edition, 2017, 32(5): 1008-1012 DOI:10.1007/s11595-017-1703-x

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Mamalis A G, Horvath M, Grabchenko A I. Diamond Grinding of Super-hard Materials[J]. J. Mater. Process Tech., 2000, 97(1): 120-125.

[2]

Duan D Z. Fabrication and Performance Evaluation of the Orderly Arrayed Diamond Saw Blade[D]. 2012 Nanjing: Nanjing University of Aeronautics and Astronautics, China.

[3]

Zhong D, Moore J J. Composition and Oxidation Resistance of Ti-B-C and Ti-B-C-N Coatings Deposited by Magnetron Sputtering[J]. Electron. Lett., 2003, 163: 50-56.

[4]

Dong H F, Lu Y, Li W S, et al. Structure and Tribological Properties of Fe-based Impregnated Diamond Abrasive-head Prepared by Different Sintering Technology[J]. Mater. Sci. Eng. Powder Metall., 2013, 18(1): 125-131.

[5]

Liu X P, Wan L, Hu W D. Effect of TiO2 Films on Diamond: Oxidation Resistance and Wear Performance[J]. Adv. Appl. Ceram., 2009, 106(8): 501-50.

[6]

Hu W D, Wan L, Liu X P, et al. Effect of TiO2/Al2O3 Film Coated Diamond Abrasive Particles by Sol-gel Technique [J]. Appl. Surf. Sci., 2011, 257(13): 5777-5783.

[7]

Hu W D, Wan L, Liu X P, et al. The Effect of TiO2/Al2O3 Film on the Properties of Diamond and Glass Composites[J]. J. Ceram. Process. Res., 2012, 13: 83-88.

[8]

Nejand B A, Sanjabi S, Ahmadi V. The Effect of Sputtering Gas Pressure on Structure and Photocatalytic Properties of Nanostructured Titanium Oxide Self-cleaning Thin Film[J]. Vacuum, 2010, 85(3): 400-405.

[9]

Peng S G, Xiong S M, Li L H, et al. Investigation on Thermal Stability of Ta2O5, TiO2 and Al2O3 Coatings for Application at High Temperature[J]. Appl. Surf. Sci., 2013, 28: 713-720.

[10]

Han X C, Tao H Z, Gong L J, et al. Origin of the Frequency Shift of Raman Scattering in Chalcogenide Glasses[J]. J. Non-Cryst. Solids, 2014, 391: 117-119.

[11]

Wahab A K, Bashir S, Al-Salik Y, et al. Ethanol Photoreactions over Au–Pd/TiO2 [J]. Appl. Pe. Res., 2014, 4(1): 55-62.

AI Summary AI Mindmap
PDF

95

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/