Thermal characterization of lauric acid and stearic acid binary eutectic mixture in latent heat thermal storage systems with tube and fins

Abstract

In order to obtain the suitable phase change material (PCM) with low phase change temperature and improve its heat transfer rate, experimental investigation was conducted. Firstly, different mass ratios of lauric acid (LA) and stearic acid(SA) eutectic mixtures were prepared and characterized by differential scanning calorimetry (DSC). Then, the performance of eutectic mixture during charging process under different fin widths in vertical condition, and performance during charging and discharging processes under different inlet temperature heat transfer fluid (HTF) in horizontal condition were investigated, respectively. The results revealed that the LA-SA eutectic mixture had the suitable phase change temperature and desired latent heat for low-temperature water floor heating system. Wide fins and high inlet temperature HTF significantly enhanced the transfer rate and decreased the melting time.

Keywords

LA-SA binary eutectic mixture / thermal properties / heat exchanger / heat transfer mechanism

References

[1] Kong XF, Lu SL, Wu Y. A Review of Building Energy Efficiency in China during “Eleventh Five-Year Plan” Period[J]. Energ Policy, 2012, 41: 624-635.

[2] Singh H, Gagandeep Saini K, et al. Experimental Comparison of Different Heat Transfer Fluid for Thermal Performance of a Solar Cooker Based on Evacuated Tube Collector[J]. Environment Development and Sustainability, 2015, 17(3): 497-511.

[3] Reyes A, Negrete D, Mahn A, et al. Design and Evaluation of a Heat Exchanger that Uses Paraffin Wax and Recycled Materials as Solar Energy Accumulator[J]. Energy Conversion and Management, 2014, 88: 391-398.

[4] Zhang CB, Chen YP, Wu LY, et al. Thermal Response of Brick Wall Filled with Phase Change Materials (PCM) under Fluctuating Outdoor Temperatures[J]. Energy and Buildings, 2011, 43(12): 3514-3520.

[5] Khudhair AM, Farid MM. A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials[J]. Energy Conversion and Management, 2004, 45(2): 263-275.

[6] Zhang YQ, Wu YT, Xia GD, et al. Development and Experimental Study on Organic Rankine Cycle System with Single-screw Expander for Waste Heat Recovery from Exhaust of Diesel Engine[J]. Energy, 2014, 77: 499-508.

[7] Yuan YP, Zhang N, Tao WQ, et al. Fatty Acids as Phase Change Materials: A Review[J]. Renewable and Sustainable Energy Reviews, 2014, 29: 482-498.

[8] Tiari S, Qiu SG, Mahdavi M. Numerical Study of Finned Heat Pipe-assisted Thermal Energy Storage System with High Temperature Phase Change Material[J]. Energy Conversion and Management, 2015, 89: 833-842.

[9] Lv YJ, Zhou WB, Jin WZ. Experimental and Numerical Study on Thermal Energy Storage of Polyethylene Glycol/expanded Graphite Composite Phase Change Material[J]. Energy and Buildings, 2016, 111: 242-252.

[10] Sarı A, Sarı H, Önal A. Thermal Properties and Thermal Reliability of Eutectic Mixtures of Some Fatty Acids as Latent Heat Storage Materials[J]. Energy Conversion and Management, 2004, 45(3): 365-376.

[11] Fauzi H, Metselaar HSC, Mahlia TMI, et al. Thermal Characteristic Reliability of Fatty Acid Binary Mixtures as Phase Change Materials (PCMs) for Thermal Energy Storage Applications[J]. Applied Thermal Engineering, 2015, 80: 127-131.

[12] Sarı A, Kaygusuz K. Thermal Performance of Myristic Acid as a Phase Change Material for Energy Storage Application[J]. Renewable Energy, 2001, 24(2): 303-317.

[13] Sari A, Kaygusuz K. Thermal Performance of Palmitic Acid as a Phase Change Energy Storage Material[J]. Energy Conversion and Management, 2002, 43(6): 863-876.

[14] Sharma A, Won LD, Buddhi D, et al. Numerical Heat Transfer Studies of the Fatty Acids for Different Heat Exchanger Materials on the Performance of a Latent Heat Storage System[J]. Renewable Energy, 2005, 30(14): 2179-2187.

[15] Hamada Y, Fukai J. Latent Heat Thermal Energy Storage Tanks for Space Heating of Buildings: Comparison between Calculations and Experiments[J]. Energy Conversion and Management, 2005, 46(20): 3221-3235.

[16] Kurnia JC, Sasmito AP, Jangam SV, et al. Improved Design for Heat Transfer Performance of a Novel Phase Change Material (PCM) Thermal Energy Storage (TES)[J]. Applied Thermal Engineering, 2013, 50(1): 896-907.

[17] Tay NHS, Bruno F, Belusko M. Experimental Investigation of Dynamic Melting in a Tube-in-tank PCM System[J]. Applied Energy, 2013, 104: 137-148.

[18] Al-Abidi AA, Mat S, Sopian K, et al. Experimental Study of Melting and Solidification of PCM in a Triplex Tube Heat Exchanger with Fins[J]. Energy and Buildings, 2014, 68: 33-41.

[19] Yang XJ, Yuan YP, Zhang N, et al. Preparation and Properties of Myristic-palmitic-stearic acid/expanded Graphite Composites as Phase Change Materials for Energy Storage[J]. Solar Energy, 2014, 99: 259-266.

[20] Myhren JA, Holmberg S. Flow Patterns and Thermal Comfort in a Room with Panel, Floor and Wall Heating[J]. Energy and Buildings, 2008, 40(4): 524-536.

[21] Baran G, Sari A. Phase Change and Heat Transfer Characteristics of a Eutectic Mixture of Palmitic and Stearic Acids as PCM in a Latent Heat Storage System[J]. Energy Conversion and Management, 2003, 44(20): 3227-3246.