Microstructure and mechanical properties of Nb-B bearing low carbon steel plate: Ultrafast cooling versus accelerated cooling

Abstract

The microstructure and mechanical properties of low carbon bainite high strength steel plate were studied via different cooling paths at the pilot scale. There was a significant increase in mechanical properties, and notably, the yield strength, tensile strength, and toughness at -40 °C for the tested steel processed by ultra-fast cooling were 126 MPa, 98 MPa and 69 J, respectively, in relation to steel processed by accelerated cooling. The ultra-fast cooling rate not only refined the microstructure, precipitates, and martensiteaustenite (M/A) islands, but also contributed to the refinement of microstructure in thick plates. The large size M/A constituents formed at lower cooling rate experienced stress concentration and were potential sites for crack initiation, which led to deterioration of low-temperature impact toughness. In contrast, the acicular ferrite and lath bainite with high fraction of high-angle grain boundaries were formed in steel processed by ultra-fast cooling, which retarded cleavage crack propagation.

Keywords

TMCP / ultra-fast cooling / M/A constituent / low-temperature toughness

References

[1] Chiaki Ouchi. Development of Steel Plates by Intensive Use of TMCP and Direct Quenching Processes[J]. ISIJ International, 2001, 41(6): 542-553.

[2] Li Zhuang. Controlled Rolling and Cooling Process for Low Carbon Cold Forging Steel[J]. Journal of Wuhan University of Technology-Materials Science Edition, 2010, 25(1): 89-93.

[3] Rodrigues PCM, Pereloma EV, Santos DB. Mechanical Properities of an HSLA Bainitic Steel Subjected to Controlled Rolling with Accelerated Cooling[J]. Materials Science and Engineering: A, 2000, 283(1–2): 136-143.

[4] Wang X, Shang C, Yang S, et al. Optimization of RPC Technique for Refining the Intermediate Transformation Microstructure[J]. Journal of University of Science and Technology Beijing, 2002, 9(3): 193-196.

[5] Wang X, He X, Yang S, et al. Refining of Intermediate Transformation Microstructure by Relaxation Processing[J]. ISIJ International, 2002, 42(12): 1553-1559.

[6] Liu Z, Tang S, Zhou X, et al. Metallurgical Principles of New-Generation TMCP of Hot Rolling Steel[J]. China Metallurgy, 2013, 23(4): 10-16.

[7] Wang G Dong. New Generation TMCP Based on Ultra-fast Cooling. The 5th International Symposium on Advanced Structural Steels and New Rolling Technologies, Shenyang, 2008

[8] Chen J, Tang S, Liu Z, et al. Microstructural Characteristics with Various Cooling Paths and the Mechanism of Embrittlement and Toughening in Low-carbon High Performance Bridge Steel[J]. Materials Science and Engineering A, 2013, 559: 241-249.

[9] Hu J, Du L, Wang Jianjun. Effect of Cooling Procedure on Microstructures and Mechanical Properties of Hot Rolled Nb-Ti Bainitic High Strength Steel[J]. Materials Science and Engineering A, 2012, 554: 79-85.

[10] Jun H, Kang JS, Seo DH, et al. Effects of Deformation and Boron on Microstructure and Continuous Cooling Transformation in Low Carbon HSLA Steels[J]. Materials Science and Engineering A, 2006, 422(1–2): 157-162.

[11] Zhu K, Carla O, Céline M, et al. Effect of B and B Plus Nb on the Bainitic Transformation in Low Carbon Steels[J]. Materials Science and Engineering A, 2011, 528(12): 4222-4231.

[12] Takuya H, Hitoshi A, Ryuji U, et al. Role of Combined Addition of Niobium and Boron and of Molybdenum and Boron on Hardnenability in Low Carbon Steels[J]. ISIJ international, 2004, 44(8): 1431-1440.

[13] Yan W, Shan Y, Yang Ke. Effect of TiN Inclusions on the Impact Toughness of Low-carbon Microalloyed Steels[J]. Materials Science and Engineering A, 2006, 37A(7): 2147-2158.

[14] Yan W, Shan Y, Yang Ke. Influence of TiN Inclusions on the Cleavage Fracture Behavior of Low-Carbon Microalloyed Steels[J]. Materials Science and Engineering A, 2007, 38A(6): 1211-1222.

[15] Xu G, Gan X, Ma G, et al. The development of Tialloyed High Strength Microalloy Steel[J]. Materials & Design, 2010, 31(6): 2891-2896.

[16] Wang R, Du X, Sun G, et al. Effect of Chromium Content on Structure and Property of Cr-Ni-Mo Low Carbon Alloy Steel[J]. Material & Heat Trantment, 2007, 36(8): 15-17.

[17] Bandyopadhyay PS, Kundu S, Ghosh SK, et al. Structure and Properties of a Low-Carbon, Microalloyed, Ultra-High-Strength Steel[J]. Materials Science and Engineering A, 2011, 42A(4): 1051-1061.

[18] Liang X, Deardo Anthony. A Study of the Influence of Thermomechanical Controlled Processing on the Microstructure of Bainite in High Strength Plate Steel[J]. Materials Science and Engineering A, 2014, 45A(11): 5173-5184.

[19] Shen Y, Wang C, Sun Xuewen. A micro-alloyed Ferritic Steel Strengthened by Nanoscale Precipitates[J]. Materials Science and Engineering A, 2011, 528(28): 8150-8156.

[20] Lan H, Du L, Misra RDK. Effect of Microstructural Constituents on Strength-toughness Combination in a Low Carbon Bainitic Steel[J]. Materials Science and Engineering A, 2014, 611: 194-200.

[21] Alberto E, Rodriguez-Ibabe JM. Cleavage Micromechanisms on Microalloyed Steels Evolution with Temperature of Some Critical Parameters[J]. Scripta Materialia, 2004, 50(2): 307-312.

[22] Sung H, Shin S, Byoungchul H, et al. Effects of Rolling and Cooling Conditions on Microstructure and Tensile and Charpy Impact Properties of Ultra-Low-Carbon High-Strength Bainitic Steels[J]. Metallurgical and Materials Transactions A, 2011, 42A(7): 1827-1835.

[23] Cota A, Santos DB. Microstructural Characterization of Bainitic Steel Submitted to Torsion Testing[J]. Materials Characterization, 2000, 44(3): 291-299.

[24] Wang C, Wu X, Liu J, et al. Transmission Electron Microscopy of Martensite/austenite Islands in Pipeline Steel X70[J]. Metallurgical and Materials Transactions A, 2006, 438–440: 267-271.

[25] Fan L, Zhou D, Wang T, et al. Tensile Properties of an Acicular Ferrite and Martensite/austenite Constituent Steel with Varying Cooling Rates[J]. Metallurgical and Materials Transactions A, 2014, 590: 224-231.

[26] Dáz-Fuentes M, Iza-mendia A, Izmene…Gutierrez. Analysis of Different Acicular Ferrite Microstructures in Low-carbon Steels by Electron Backscattered Diffraction Study of Their Toughness Behavior[J]. Metallurgical and Materials Transactions A, 2003, 34: 2505-2516.

[27] Nohava J, Haušild P, Karlík M, et al. Electron Backscattering Diffraction Analysis of Secondary Cleavage Cracks in a Reactor Pressure Vessel Steel[J]. Materials Characterization, 2003, 49: 211-217.

[28] Echeverria A, Rodriguez-Ibabe JM. The Role of Grain Size in Brittle Particle Induced Fracture of Steels[J]. Materials Science and Engineering A, 2003, 346: 149-158.