Reaction mechanism and microstructure evolution of reaction sintered h-BN

Abstract

Hexagonal boron nitride ceramic (h-BN) based on the nitridation of B powders was obtained by reaction sintering method. The effects of sintering temperature on the mechanical properties and microstructure of the resultant products were investigated and the reaction mechanism was discussed. Results showed that the reaction between B and N₂ occurred vigorously at temperatures ranging from 1 000 °C to 1 300 °C, which resulted in the generation of t-BN. When the temperature exceeded 1 450 °C, transformation from t-BN to h-BN began to occur. As the sintering temperature increased, the spherical particles of t-BN gradually transformed into fine sheet particles of h-BN. These particles subsequently displayed a compact arrangement to achieve a more uniform microstructure, thereby increasing the strength.

Keywords

hexagonal boron nitride ceramic / reaction sintering / t-BN / mechanical properties / microstructure

References

[1] Eichler J, Lesniak C. Boron Nitride (BN) and BN Composites for Hightemperature Applications[J]. Journal of the European Ceramic Society, 2008, 28(5): 1105-1109.

[2] Steinborn C, Herrmann M, Keitel U, et al. Correlation between Microstructure and Electrical Resistivity of Hexagonal Boron NitrideCeramics[J]. Journal of the European Ceramic Society, 2013, 33(6): 1225-1235.

[3] Ertug B, Boyraz T, Addemir O. Microstructural Aspects of the Hot-Pressed Hexagonal Boron Nitride Ceramics with Limited Content of Boron Oxide[C]. Materials Science Forum, 2007, 554: 197-200.

[4] Duan X, Ding Y, Jia D, et al. Ion Sputtering Erosion Mechanisms of h-BN Composite Ceramics with Textured Microstructures[J]. Journal of Alloys and Compounds, 2014, 613: 1-7.

[5] Eichler J, Uibel K, Lesniak C. Boron Nitride (BN) and Boron Nitride Composites for Applications under Extreme Conditions[J]. Advances in Science and Technology, 2011, 65: 61-69.

[6] Pruss EA, Wood GL, Kroenke W J, et al. Aerosol Assisted Vapor Synthesis of Spherical Boron Nitride Powders[J]. Chemistry of Materials, 2000, 12(1): 19-21.

[7] Gildea SR, Matlock TS, Martínez-Sánchez M, et al. Erosion Measurements in a Low-Power Cusped-Field Plasma Thruster [J]. Journal of Propulsion and Power, 2013, 29(4): 906-918.

[8] Zidar DG, Rovey JL. Hall-Effect Thruster Channel Surface Properties Investigation[J]. Journal of Propulsion and Power, 2012, 28(2): 334-343.

[9] Hagio T, Yoshida H. Sintering and Crystallization of Ground Hexagonal Boron Nitride[J]. J. Mater. Sci. Lett., 1994, 13(9): 653-655.

[10] Aroati S, Cafri M, Dilman H, et al. Preparation of Reaction Bonded Silicon Carbide (RBSC) Using Boron Carbide As an Alternative Source of Carbon[J]. Journal of the European Ceramic Society, 2011, 31(5): 841-845.

[11] Gao XJ, Cao JW, Cheng L F, et al. Effect of Carbon Content on Mechanical Properties of SiC/B₄C Prepared by Reaction Sintering[J]. Journal of Inorganic Materials, 2015, 30(1): 102-106.

[12] Gao XJ, Cheng LF, Cao J W, et al. Effect of Carbon Contents on Microstructure of B₄C/SiC Composites[J]. Optoelectronics and Advanced Materials-Rapid Communications, 2015, 9(3–4): 482-487.

[13] Sekine T, Sato T. Shock-induced Mechanisms of Phase Transformation from Rhombohedral BN to Cubic BN[J]. Journal of Applied Physics, 1993, 74(4): 2440-2444.