Water absorption and chloride ion penetrability of concrete damaged by freeze-thawing and loading

Abstract

In order to investigate water and chloride ion transport in damaged concrete, three types of concrete were prepared, freeze-thawing (F-T) cycling and compressive loading were adopted to induce damage to concrete. Ultrasonic pulse velocity technique was used for evaluating the damage degree of concrete, and the defects of damaged concrete were also detected by X-CT. Water absorption and chloride ion penetrability were used for describing the transport properties of damaged concrete. Effects of damage degree on the water absorption rate and chloride ion penetrability were investigated in detail and the relationships were also established. The results show that the water absorption of concrete makes various responses to damage degree due to the difference of concrete type and damage method. For same concrete with similar damage degree, the water absorption rate of F-T damaged concrete is usually larger than that of concrete damaged by loading. The chloride ion penetrability of damaged concrete increases linearly with increasing damage degree, which is more sensitive to damage degree if the original penetrability of sound concrete is higher.

Keywords

concrete / water absorption / chloride ion / freeze-thawing / loading / durability

References

[1] Mehta PK, Monteiro JMP. Concrete Microstructure, Properties, Materials, 2014 3

[2] Desmettre C, Charron JP. Water Permeability of Reinforced Concrete with and Without Fiber Subjected to Static and Constant Tensile Loading[J]. Cem. Concr. Res., 2012, 42(7): 945-952.

[3] Wang Y, Wang XY, Scholz M, et al. A Physico-chemical Model for the Water Vapour Sorption Isotherm of Hardened Cementitious Materials[J]. Constr. Build. Mater., 2012, 35: 941-946.

[4] Jang SY, Bo SK, Oh BH. Effect of Crack width on Chloride Diffusion Coefficients of Concrete by Steady-state Migration Tests[J]. Cem. Concr. Res., 2011, 41(1): 9-19.

[5] Park SS, Kwon SJ, Sang HJ, et al. Analysis Technique for Chloride Penetration in Cracked Concrete Using Equivalent Diffusion and Permeation[J]. Constr. Build. Mater., 2012, 29(4): 183-192.

[6] Gowripalan N, Sirivivatnanon V, Lim CC. Chloride Diffusivity of Concrete Cracked in Flexure[J]. Cem. Concr. Res., 2000, 30(5): 725-730.

[7] Grassl P. A Lattice Approach to Model Flow in Cracked Concrete[J]. Cem. Concr. Compos., 2009, 31(7): 454-460.

[8] Solís-Carcaño R, Moreno EI. Evaluation of Concrete Made with Crushed Limestone Aggregate based on Ultrasonic Pulse Velocity[J]. Constr. Build. Mater., 2008, 22: 1225-1231.

[9] Trtnik G, Kavcic F, Turk G. Prediction of Concrete Strength Using Ultrasonic Pulse Velocity and Artificial Neural Networks[J]. Ultrason., 2009, 49(1): 53-60.

[10] Shariq M, Prasad J, Masood A. Studies in Ultrasonic Pulse Velocity of Concrete Containing GGBFS[J]. Constr. Build. Mater., 2013, 40(3): 944-950.

[11] Bogas JA, Gomes MG, Gomes A. Compressive Strength Evaluation of Structural Lightweight Concrete by Non-destructive Ultrasonic Pulse Velocity Method[J]. Ultrason., 2013, 53(5): 962-972.

[12] Yu H, Sun W, Zhang Y, et al. Durability of Concrete Subjected to the Combined Actions of Flexural Stress, Freeze-thaw Cycles and Bittern Solutions[J]. J. Wuhan Univ. Technol.-Mater. Sci. Ed., 2008, 23(6): 893-900.

[13] Chung CW, Shon CS, Kim YS. Chloride Ion Diffusivity of Fly Ash and Silica Fume Concretes Exposed to Freeze-thaw Cycles[J]. Constr. Build. Mater., 2010, 24(9): 1739-1745.

[14] Molero M, Aparicio S, Al-Assadi G, et al. Evaluation of Freeze-thaw Damage in Concrete by Ultrasonic Imaging[J]. Ndt E Int., 2012, 52(4): 86-94.

[15] Zhao J, Cai G, Gao D, et al. Influences of Freeze-thaw Cycle and Curing Time on Chloride Ion Penetration Resistance of Sulphoaluminate Cement Concrete[J]. Constr. Build. Mater., 2014, 53(2): 305-311.

[16] Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic Cement Concretes[S]. ASTM C1585–13, 2013

[17] Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration[S]. ASTM C1202–12, 2012

[18] Wang Z, Zeng Q, Wu Y, et al. Relative Humidity and Deterioration of Concrete under Freeze-thaw Load[J]. Constr. Build. Mater., 2014, 62(7): 18-27.

[19] Powers TC, Willis TF. The Air Requirement of Frost Resistant Concrete [C]. In: Highway Research Board Proceedings, 1950, 29: 184-211.

[20] Scherer GW. Crystallization in Pores[J]. Cem. Concr. Res., 1999, 29(99): 1347-1358.

[21] Setzer MJ. Micro-Ice-Lens Formation in Porous Solid[J]. J. Colloid Interface Sci., 2001, 243(1): 193-201.

[22] Hall C. Water Sorptivity of Mortars and Concretes: A Review[J]. Mag. Concr. Res., 1989, 41(147): 51-61.

[23] Hall C, Hoff WD. Water Transport in Brick, Stone and Concrete, 2012 143-145.

[24] Vejmelková E, Pavliková M, Jerman M, et al. Free Water Intake as Means of Material Characterization[J]. J. Build. Phys., 2009, 33: 29-44.

[25] Castro J, Bentz D, Weiss J. Effect of Sample Conditioning on the Water Absorption of Concrete[J]. Cem. Concr. Compos., 2011, 33(8): 805-813.