Thermal cycling stability of Mg-25Al-15Zn-14Cu PCM

Abstract

Thermal cycling tests of repeated melting/freezing processes were performed to check the thermal stability of Mg-25Al-15Zn-14Cu alloy as phase change thermal storage material(PCM). Latent heat storage capacity and phase transition temperature of the PCMs were determined by differential scanning calorimetry (DSC) technique as a function of repeated thermal cycles such as 0, 100, 200, and 1000. The present work also comprised the investigation of the density and microstructure of Mg-25Al-15Zn-14Cu alloy before and after thermal cycles by using the hydrostatic method and optical microscopy (OM), X-ray diffraction (XRD), and electron probe microanalysis (EPMA), respectively. The results show that the melting temperature of alloy after 1000 thermal cycles is 415.1 °C and the latent heat value is 190.4 J/g. Compared with the original alloy, the phase transition temperature will increase by 1.87% and the value of phase change latent heat will decrease by 7.35%, which are in a suitable range. Therefore, Mg-25Al-15Zn-14Cu alloy has a good thermal reliability in terms of the change in its thermal properties with respect to thermal cycling for 1000, and can be used for a middle-temperature thermal storage utility.

Keywords

thermal stability / phase change thermal storage material / Mg-based alloy

References

[1] Li YY, Cheng XM, He G, et al. Investigation on Stability of Al-Cu-Mg-Zn Phase Change Heat Storage Alloy During Thermal Cycling[J]. Mater. Heat Treat., 2012, 41(22): 107-109.

[2] Zhu JQ, Li YY, Zhou WB, et al. The Research Progress of Solar Thermal Heat Storage Material[J]. Solar Energy, 2009, 6: 29-32.

[3] Flicker HW. Regenerative Thermal Storage in Atmospheric Air System Solar Power Plants[J]. Energy, 2004, 29: 871-881.

[4] Sharma A, Tyagi VV, Chen CR, et al. Review on Thermal Energy Storage with Phase Change Materials and Applications[J]. Sci. Direct, 2009, 13: 318-345.

[5] Sun JQ, Zhang RY, Liu ZP, et al. Thermal Reliability Test of Al-34%Mg-6%Zn Alloy as Latent Heat Storage Material and Corrosion of Metal with Respect to Thermal Cycling[J]. Energy Convers. Manage., 2007, 48: 619-624.

[6] Sun JQ, Zhang RY. Review of Thermal Energy Storage with Metal Phase Change Materials[J]. J. Mater., 2005, 19(8): 99-105.

[7] Liu J, Wang X, Zeng DB, et al. The Selectness of High-temperature Phase Change Materials Al-Si Alloy and Experimental Research on the Container[J]. ACTA Energi. Sin., 2006, 27(1): 36-42.

[8] Zhang GC, Xu Z, Chen YF, et al. Progress in Metal-based Phase Change Materials for Thermal Energy Storage Applications[J]. Energy Storage Sci. Technol., 2012, 1(1): 74-81.

[9] Zhang RY, Sun JQ, Ke XF, et al. Heat Storage Properties of Al-Si Alloy[J]. Chin. J. Mater. Res., 2006, 20(2): 156-160.

[10] Zou X, Tong ZF, Zhao XW. Study of Alar Phase-change Material[J]. New Energy, 1996, 18(8): 1-3.

[11] Wang BQ, Zhang RY, Zhu HY. The Influence of Modification and Heat Cycle on Morphology and Heat Storage Properties of Al-17%Si Alloy[J]. Mater. Res. Appl., 2009, 3(4): 258-261.

[12] Chen GS, Wang BQ, Zhang RY, et al. Research of Thermal Storage Characteristics of Al-Si Alloy as PCM[J]. Mater. Res. Appl., 2010, 4(4): 255-259.

[13] Birehenall CE, Riechman A. Heat Storage in Eutectic Alloys[J]. Metall. Trans. A, 1980, 11A: 1415-1420.

[14] Liu CH. Research on Thermal Storage Characteristics of Mg-Al-Zn Alloys as PCM[D], 2013 Wuhan: Wuhan Univ. Technol..

[15] Anant S, Buddhi D, Sawhney R L. Thermal Cycling Test of few Selected Inorganic and Organic Phase Change Materials[J]. Renewable Energy, 2008, 33: 2606-2614.

[16] Zhang XX, Tao XM, Yick K-l, et al. Structure and Thermal Stability of Microencapsulated Phase-change Materials[J]. Original Contrib., 2004, 282: 330-336.

[17] Farkas D, Birchenall CE. New Eutectic Alloys and Their Heats of Transformation[J]. Metall. Trans. A, 1985, 16A: 323-328.