Surface functionalized carbon nanofibers and their effect on the dispersion and tribological property of epoxy nanocomposites

Abstract

Surface functionalization of carbon nanofibers (CNFs) was carried out, i e, CNFs were firstly oxidized and then the surface was silanized by 3-Aminopropyltriethoxysilane (APTES) via an assembly method. A new kind of high wear resistance s-CNFs/epoxy composite was fabricated by in-situ reaction. FTIR spectroscopy was used to detect the changes of the functional groups produced by silane on the surface of CNFs. The tribological properties and microstructures of modified and unmodified CNFs/epoxy composites were studied, respectively. The expremental results indicate that APTES is covalently linked to the surface of CNFs successfully and improves the dispersion of CNF in epoxy matrix. The friction coefficients and the wear rates of s-CNFs/epoxy composites are evidently lower than those of u-CNFs/epoxy composites under the same loads. Investigations also indicate that abrasive wear is the main wear mechanism for u-CNFs/epoxy composite, with slight adhesive wear for s-CNFs/epoxy composite under the same sliding wear condition.

Keywords

polymer-matrix composites / carbon nanofibers / surfaces functionalization / friction and wear / morphology

References

[1] Rahaman M, Chaki TK, Khastgir D. Control of the Temperature Coefficient of the DC Resistivity in Polymer-based Composites[J]. J. Mater. Sci., 2013, 48(21): 7466-7475.

[2] Lau K, Wong T, Rhee KY, et al. Property Enhancement of Polymerbased Composites at Cryogenic Environment by Using Tailored Carbon Nanotubes[J]. Compos. Part. B-Eng., 2013, 54: 41-43.

[3] Podsiadlo P, Kaushik AK, Arruda EM, et al. Ultra Strong and Stiff Layered Polymer Nanocomposites[J]. Science, 2007, 318(5847): 80-83.

[4] Zhu J, Wei S, Ryu J, et al. In Situ Stabilized Carbon Nanofiber (CNF) Reinforced Epoxy Nanocomposites[J]. J. Mater. Chem., 2010, 20: 4937-4948.

[5] Wang H, Yan L, Liu D, et al. Investigation of the Tribological Properties: Core-shell Structured Magnetic Ni@ NiO Nanoparticles Reinforced Epoxy Nanocomposites[J]. Tribol. Int., 2015, 83: 139-145.

[6] Alamri H, Low IM, Alothman Z. Mechanical, Thermal and Microstructural Characteristics of Cellulose Fibre Reinforced Epoxy/Organoclay Nanocomposites [J]. Compos. Part. B-Eng., 2012, 43(7): 2762-2771.

[7] Brocks T, Cioffi MOH, Voorwald HJC. Effect of Fiber Surface on Flexural Strength in Carbon Fabric Reinforced Epoxy Composites[J]. Appl. Surf. Sci., 2013, 274: 210-216.

[8] Rhee KY, Park JO, Park SJ. Silane Treatment of Fe₃O₄ and Its Effect on the Magnetic and Wear Properties of Fe₃O₄/epoxy Nanocomposites[J]. Appl. Surf. Sci., 2010, 256: 6945-6950.

[9] Kanchanomai C, Noraphaiphipaksa N, Mutoh Y. Wear Characteristic of Epoxy Resin Filled with Crushed-silica Particles[J]. Compos. Part. B-Eng., 2011, 42: 1446-1452.

[10] Chou TW, Gao L, Thostenson ET, et al. An Assessment of the Science and Technology of Carbon Nanotube-based Fibers and Composites[J]. Compos. Sci. Technol., 2010, 70(1): 1-19.

[11] Cividanes LS, Simonetti EAN, Moraes MB, et al. Influence of Carbon Nanotubes on Epoxy Resin Cure Reaction Using Different Techniques: A comprehensive Review[J]. Polym. Eng. Sci., 2013, 54(11): 2461-2469.

[12] Bal S. Experimental Study of Mechanical and Electrical Properties of Carbon Nanofiber/epoxy Composites[J]. Mater. Design, 2010, 31(5): 2406-2413.

[13] Wu Q, Zhu W, Zhang C, et al. Study of Fire Retardant Behavior of Carbon Nanotube Membranes and Carbon Nanofiber Paper in Carbon Fiber Reinforced Epoxy Composites[J]. Carbon, 2010, 48(6): 1799-1806.

[14] Yang Z, McElrath K, Bahr J, et al. Effect of Matrix Glass Transition on Reinforcement Efficiency of Epoxy-matrix Composites with Single Walled Carbon Nanotubes, Multi-walled Carbon Nanotubes, Carbon Nanofibers and Graphite[J]. Compos. Part. B-Eng., 2012, 43: 2079-2086.

[15] Atchudan R, Pandurangan A, Joo J. Effects of Nanofillers on the Thermo-Mechanical Properties and Chemical Resistivity of Epoxy Nanocomposites[J]. J. Nanosci. Nanotechno., 2015, 15(6): 4255-4267.

[16] Lim CS, Rodriguez AJ, Guzman ME, et al. Processing and Properties of Polymer Composites Containing Aligned Functionalized Carbon Nanofibers[J]. Carbon, 2011, 49: 1873-1883.

[17] Al-Saleh MH, Sundararaj U. Review of the Mechanical Properties of Carbon Nanofiber/polymer Composites[J]. Compos. Part. A-Appl. S., 2011, 42(12): 2126-2142.

[18] Ozkan T, Chen Q, Chasiotis I. Interfacial Strength and Fracture Energy of Individual Carbon Nanofibers in Epoxy Matrix as a Function of Surface Conditions[J]. Compos. Sci. Technol., 2012, 72: 965-975.

[19] Krushnamurty K, Reddy PMK, Srikanth I, et al. The Reinforcement Ability of Plasma-Etched Carbon Nanofibers on Mechanical Properties of C-Epoxy Composites[J]. Plasma. Process. Polym., 2014, 11(6): 588-595.

[20] Jang JS, Varischetti J, Suhr J. Strain Dependent Energy Dissipation in Multi-scale Carbon Fiber Composites Containing Carbon Nanofibers[J]. Carbon, 2012, 50: 4277-4283.

[21] Poveda RL, Gupta N. Electrical Properties of Carbon Nanofiber Reinforced Multiscale Polymer Composites[J]. Mater. Design, 2014, 56: 416-422.

[22] Zhou Y, Jeelani S, Lacy T. Experimental Study on the Mechanical Behavior of Carbon/Epoxy Composites with a Carbon Nanofibermodified Matrix[J]. J. Compos. Mater., 2014, 48(29): 3659-3672.

[23] Ma PC, Siddiqui NA, Marom G, et al. Dispersion and Functionalization of Carbon Nanotubes for Polymer-based Nanocomposites: A Review[J]. Compos. Part. A-Appl. S., 2010, 41(10): 1345-1367.

[24] Barrena MI, Gómez SJM, Soria A, et al. Improved of the Wear Resistance of Carbon Nanofiber/Epoxy Nanocomposite by A Surface Functionalization of the Reinforcement[J]. Appl. Surf. Sci., 2014, 289: 124-128.