Effect of reactive nanoclays on performances of PMMA/reactive nanoclay nanocomposites

Abstract

PMMA/reactive nanoclay nanocomposites were prepared by emulsion polymerization using two different reactive nanoclays. X-ray diffraction (XRD) and thermogravimetric analysis (TGA) results confirmed that the reactive nanoclays, kaolinite and montmorillonite, were obtained by the silylation reaction and the double bonds were grafted onto the edges and surfaces of the nanoclays. The presence of reactive nanoclays could increase the average molecular weights, the glass transition temperatures (T _g) and improve the thermal properties of nanocomposite. The tensile properties, Young’s modulus, and the aging properties of the nanocomposite films were also enhanced while the light transmittance decreased. Furthermore, the nanocomposites with the reactive kaolinite presented better performances than that with the reactive montmorillonite. Finally, the action mechanism of the reactive nanoclays to the performances of PMMA/reactive nanoclay nanocomposites was proposed.

Keywords

nanoclay / emulsion polymerization / nanocomposite / thermal property / mechanical property

References

[1] Fréchet JMJ. Functional Polymers: From Plastic Electronics to Polymer-Assisted Therapeutics[J]. Prog. Polym. Sci., 2005, 30(8-9): 844-857.

[2] Alexandre M, Dubois P. Polymer-Layered Silicate Nanocomposites: Preparation, Properties and Uses of a New Class of Materials[J]. Mater. Sci. Eng. R, 2000, 28(1): 1-63.

[3] Chen Y, Xu WJ. The Evolution of Structure and Properties of PNIPA/Clay Nanocomposite Hydrogels with the Freezing Time in Polymerization[J]. J. Mater. Res., 2014, 29(6): 820-832.

[4] Abbasian M, Jaymand M, Bonab SES. Synthesis and Characterization of a Terpolymer Derived from Styrene, Methyl styrene and Polyaniline and its Organoclay Nanocomposite[J]. J. Appl. Polym. Sci., 2012, 125: E131-E140.

[5] Caseri WR. Nanocomposites of Polymers and Inorganic Particles: Preparation, Structure and Properties[J]. Mater. Sci. Technol., 2006, 22(7): 807-17.

[6] Okamoto M. Recent Advances in Polymer/Layered Silicate Nanocomposites: an Overview from Science to Technology[J]. Mater. Sci. Technol., 2006, 22(7): 756-779.

[7] El Achaby M, Arrakhiz FE, Vaudreuil S, et al. Nanocomposite Films of Poly(vinylidene fluoride) Filled with Polyvinylpyrrolidone-Coated Multiwalled Carbon Nanotubes: Enhancement of β-Polymorph Formation and Tensile Properties[J]. Polym. Eng. Sci., 2013, 53(1): 34-43.

[8] Russo P, Cammarano S, Bilotti E, et al. Physical Properties of Poly Lactic Acid/Clay Nanocomposite Films: Effect of Filler Content and Annealing Treatment[J]. J. Appl. Polym. Sci., 2013, 2(131): 39798

[9] De Azevedo W, Schwartz M, Do Nascimento G. Synthesis and Characterization of Polyaniline/Clay Nanocomposite[J]. Physica. Status. Solidi. C, 2004 1

[10] Źbik MS, Raftery NA, Smart RSC, et al. Kaolinite Platelet Orientation for XRD and AFM Applications[J]. Appl. Clay. Sci., 2010, 50(3): 299-304.

[11] Cheng H, Liu Q, Yang J, et al. Influencing Factors on Kaolinite-Potassium Acetate Intercalation Complexes[J]. Appl. Clay. Sci., 2010, 50(4): 476-480.

[12] Zhao H, Shipp DA. Preparation of Poly (styrene-block-butyl acrylate) Block Copolymer-Silicate Nanocomposites[J]. Chem. Mater., 2003, 15(14): 2693-2695.

[13] Christopher. Hyperbranched Polymer Layered Silicate Nanocomposites[J]. Chem. Mater., 2002, 14(2): 486-488.

[14] Cao X, James Lee L, Widya T, et al. Polyurethane/Clay Nanocomposites Foams: Processing, Structure and Properties[J]. Polymer, 2005, 46(3): 775-783.

[15] Dhibar S, Kar P, Khatua BB. Preparation of Highly Exfoliated and Transparent Polycarbonate/Clay Nanocomposites by Melt Blending of Polycarbonate and Poly(methyl methacrylate)/Clay Nanocomposites[J]. J. Appl. Polym. Sci., 2012, 125(S1): E601-E609.

[16] Depan D, Kumar AP, Singh RP, et al. Stability of Chitosan/Montmorillonite Nanohybrid towards Enzymatic Degradation on Grafting with Poly(lactic acid)[J]. Mater. Sci. Technol., 2014, 30(5): 587-592.

[17] Hajibeygi M, Shabanian M. Poly(amide-imide)/Organoclay Nanocomposites Using Glycine as a Natural Amino Acid: Study on Fire and Thermal Behavior[J]. Polym. Int., 2014, 63(3): 514-520.

[18] Tyan HL, Liu YC, Wei KH. Thermally and Mechanically Enhanced Clay/Polyimide Nanocomposite via Teactive Organoclay[J]. Chem. Mater., 1999, 11(7): 1942-1947.

[19] Leu CM, Wu ZW, Wei KH. Synthesis and Properties of Covalently Bonded Layered Dilicates/Polyimide (BTDA-ODA) Nanocomposites[J]. Chem. Mater., 2002, 14(7): 3016-3021.

[20] Nugay N, Nugay T, Kennedy JP. Minute Amounts of Organically Modified Montmorillonite Improve the Properties of Polyisobutylene-Based Polyurethanes[J]. J. Polym. Sci, Part A: Polym. Chem., 2013, 51(19): 4076-4087.

[21] García-López D, Gobernado-Mitre I, Fernández J, et al. Influence of Clay Modification Process in PA6-Layered Silicate Nanocomposite Properties[J]. Polymer, 2005, 46(8): 2758-2765.

[22] Mitsunaga M, Ito Y, Ray SS, et al. Intercalated Polycarbonate/Clay Nanocomposites: Nanostructure Control and Foam Processing[J]. Macromol. Mater. Eng., 2003, 288(7): 543-548.

[23] Yeh JM, Liou SJ, Lin CY, et al. Anticorrosively Enhanced PMMA-Clay Nanocomposite Materials with Quaternary Alkylphosphonium Salt as an Intercalating Agent[J]. Chem. Mater., 2002, 14(1): 154-161.

[24] Tien Y, Wei K. High-Tensile-Property Layered Silicates/Polyurethane Nanocomposites by Using Reactive Silicates as Pseudo Chain Extenders[J]. Macromolecules, 2001, 34(26): 9045-9052.

[25] Fang Y, Hoppe S, Hu GH, et al. Synthesis of Poly(butyl acrylate)-Laponite Nanocomposite Nanoparticles for Improving the Impact Strength of Poly(lactic acid)[J]. J. Appl. Polym. Sci., 2013, 129(5): 2580-2590.

[26] Wheeler PA, Wang J, Mathias LJ. Poly (methyl methacrylate)/Laponite Nanocomposites: Exploring Covalent and Ionic Clay Modifications[J]. Chem. Mater., 2006, 18(17): 3937-3945.

[27] Zhao CG, Feng M, Gong FL, et al. Preparation and Characterization of Polyethylene-Clay Nanocomposites by Using Chlorosilane-Modified Clay[J]. J. Appl. Polym. Sci., 2004, 93(2): 676-80.

[28] Li Y, Zhang B, Pan X. Preparation and Characterization of PMMAKaolinite Intercalation Composites[J]. Compos. Sci. Technol., 2008, 68(9): 1954-1961.

[29] Wang L, Xie X, Su S, et al. A Comparison of the Fire Retardancy of Poly (methyl methacrylate) Using Montmorillonite, Layered Double Hydroxide and Kaolinite[J]. Polym. Degrad. Stab., 2010, 95(4): 572-578.

[30] De Maria A, Aurora A, Montone A, et al. Synthesis and Characterization of PMMA/Silylated MMTs[J]. J. Nanopart. Res., 2011, 13(11): 6049-6058.

[31] Ianchis R, Corobea M, Donescu D, et al. Advanced Functionalization of Organoclay Nanoparticles by Silylation and their Polystyrene Nanocomposites Obtained by Miniemulsion Polymerization[J]. J. Nanopart. Res., 2012, 14(11): 1-12.

[32] Nikolaidis AK, Achilias DS, Karayannidis GP. Synthesis and Characterization of PMMA/Organomodified Montmorillonite Nanocomposites Prepared by in Situ Bulk Polymerization[J]. Ind. Eng. Chem. Res., 2010, 50(2): 571-579.