Continuous deformation monitoring by polymer-matrix carbon fiber sensitive layer

Abstract

Composite made of short-cut carbon fiber mat and vinyl ester resin was observed to be an effective sensor for tensile strain up to 6 000 με. Based on its strain sensitivity, a skin-like sensitive layer which can continuously cover the structural surface to sense strain in large area was developed. The sensitive layer was applied to continuously monitor the deformation of a simply supported beam. The result indicates that the fractional change in electrical resistance of the sensitive layer reversibly reflects the beam deformation in each section and describes the distribution of the average strain of the beam. The effect of temperature change on the monitoring was studied by monitoring tests conducted at different temperatures ranging from 20 to 80 °C, which reveals temperature sensitivity in the sensitive layer and the temperature dependence of the piezoresistive behavior when the temperature exceeds 50 °C. By the application of differential connection principle, a method for temperature compensation was established and the gauge factor for the monitoring was dramatically increased. This method was verified experimentally.

Keywords

polymer-matrix carbon fiber sensitive layer / strain sensitivity / continuous deformation monitoring / temperature compensation

References

[1] Majumder M, Gangopadhyay TK, Chakraborty AK, et al. Fibre Bragg Gratings in Structural Health Monitoring-Present Status and Applications[J]. Sens. Actuators A, 2008, 147: 150-164.

[2] Kirikera G R, Balogun O, Sridhar K. Adaptive Fiber Bragg Grating Sensor Network for Structural Health Monitoring: Applications to Impact Monitoring[J]. Struct. Health Monit., 2011, 10(3): 5-16.

[3] Lee J, Choi K, Hull Y. Damage Detection Method for Large Structures Uusing Static and Dynamic Strain Data from Distributed Fiber Optic Sensor[J]. Int. J. Steel Struct., 2010, 10(1): 91-97.

[4] Chang T Y, Li D Y, Koscica T E, et al. Fiber Optic Distributed Temperature and Strain Sensing Ssystem based on Brillouin Light Scattering[J]. Appl. Opt., 2008, 47(33): 6202-6206.

[5] Nishio M, Mizutani T, Takeda N. Structural Shape Reconstruction with Consideration of the Reliability of Distributed Strain Data from a Brillouin-scattering-based Optical Fiber Sensor[J]. Comput. Phys. Commun., 2010, 184(1): 34-39.

[6] Zhang XY, Lv Y, Chen JZ, et al. Field Sensing Characteristic Research of Carbon Fiber Smart Material[J]. J. Wuhan University of Technology-Mater. Sci. Ed., 2015, 30(5): 914-917.

[7] Yuan G, Li X, Dong Z, et al. The Structure and Properties of Ribbonshaped Carbon Fibers with High Orientation[J]. Carbon, 2014, 68(2): 426-439.

[8] Peng SJ, Zou QC. An Investigation on the Surface Properties of Lyocellbased Carbon Fiber with Inverse Gas Chromatography[J]. J. Mater. Sci., 2007, 42(16): 6907-6912.

[9] Schulte K, Baron C. Load and Failure Analyses of CFRP Laminates by Means of Electrical Resistivity Measurements[J]. Compos. Sci. Technol., 1989, 36(1): 63-76.

[10] Boschetti-de-Fierro A, Pardey R, Savino V, et al. Piezoresistive Behavior of Epoxy Matrix-carbon Fiber Composites with Different Reinforcement Arrangements[J]. J. Appl. Polym. Sci., 2009, 111: 2851-2858.

[11] Angelidis N, Wei C Y, Irving P E. The Electrical Resistance Response of Continuous Carbon Fibre Composite Laminates to Mechanical Strain[J]. Compos. Part A, 2004, 35(10): 1135-1147.

[12] Gordon D A, Wang S, Chung D D L. Piezoresistivity in Unidirectional Continuous Carbon Fiber Polymer-matrix Composites: Single-lamina Composite versus Two-lamina Composite[J]. Compos. Interfaces, 2004, 11(1): 95-103.

[13] Wang S, Chung D D L. Negative Piezoresistivity in Continuous Carbon Fibre Epoxy-matrix Composites[J]. J. Mater. Sci., 2007, 42(13): 4987-4995.

[14] Wang D, Chung D D L. Through-thickness Piezoresistivity in a Carbon Fiber Polymer-matrix Structural Composite for Electrical-resistancebased through-thickness Strain Sensing[J]. Carbon, 2013, 60(12): 129-138.

[15] Wang X, Chung D D L. Self-monitoring of Fatigue Damage and Dynamic Strain in Carbon Fiber Polymer-matrix Composite[J]. Compos. Part B, 1998, 29(1): 63-73.

[16] Irving P, Thiagarajan C. Fatigue Damage Characterization in Carbon Fibre Composite Materials Using an Electrical Potential Technique[J]. Smart Mater. Struct., 1998, 7(4): 456-466.

[17] Baere I D, Paepegem W V, Degrieck J. Electrical Resistance Measurement for in Situ Monitoring of Fatigue of Carbon Fabric Composites[J]. Int. J. Fatigue, 2010, 32(1): 197-207.

[18] Wang S, Wang D, Chung D D L, et al. Method of Sensing Impact Damage in Carbon Fiber Polymer-matrix Composite by Electrical Resistance Measurement[J]. J. Mater. Sci., 2006, 41(8): 2281-2289.

[19] Wang S, Wang D, Chung D D L, et al. Impact Damage of Carbon Fiber Polymer-matrix Composites, Monitored by Electrical Resistance Measurement[J]. Compos. Part A, 2005, 36: 1707-1715.

[20] Wang X, Chung D D L. Short Carbon Fiber Reinforced Epoxy Coating as a Piezoresistive Strain Sensor for Cement Mortar[J]. Sens. Actuators, A, 1998, 71(3): 208-212.

[21] Chekanov Y, Ohnogi R, Asai S, et al. Electrical Properties of Epoxy Resin Filled with Short Carbon Fibers[J]. J. Mater. Sci., 1999, 34(22): 5589-5592.

[22] Xi Y, Ishikawa I, Bin Y, et al. Positive Temperature Coefficient Effect of LMWPE–UHMWPE Blends Filled with Short Carbon Fibers[J]. Carbon, 2004, 42: 1699-1706.

[23] Wang S, Chung DDL. Temperature/light Sensing Using Carbon Fiber Polymer-matrix[J]. Compos. Part B, 1999, 30(6): 591-601.