Effect of samarium (Sm) addition on microstructure and mechanical properties of Al-5Cu alloys

Abstract

The purpose of this study is to investigate the influence of samarium addition on the microstructures and mechanical properties of Al-5Cu alloys. The microstructures were examined by optical microscopy, X-ray diffraction, scanning electron microscopy, energy diffraction spectroscopy and differential thermal analysis. It was found that Sm was capable significantly of affecting the microstructures of Al-5Cu alloys. When 0.4 wt% Sm was added into the alloy, the aspect ratio and the mean area of Al₂Cu phase were 10.9 and 61.0 μm². They were decreased by 31.5% and 43.3% when compared with unmodified alloy. Meanwhile, a kind of nano size strengthening Al₂Sm phase was formed in Al-5Cu alloys. In addition, the differential thermal analysis results showed that Sm addition results in a decrease in the melting temperature of α-Al and Al₂Cu. And a good combination of yield strength (244.5 MPa), ultimate tensile strength (269.4 MPa) and elongation (6.9%) was obtained when the Sm addition was 0.4 wt%. Compared with unmodified Al-5Cu alloys, they were increased by 37.6%, 35.2% and 21.1%, respectively.

Keywords

rare earth / aluminum alloys / microstructure / mechanical properties

References

[1] Li H Z, Liang X P, Li F G, et al. Effect of Y Content on Microstructure and Mechanical Properties of 2519 Aluminum Alloy[J]. Transactions of Nonferrous Metals, 2007, 17(6): 1194-1198.

[2] Pandeya S C, Josepha M A, Pradeep M S, et al. A Theoretical and Experimental Evaluation of Repetitive Corrugation and Straightening: Application to Al-Cu and Al-Cu-Sc Alloys[J]. Materials Science and Engineering A, 2012, 534: 282-287.

[3] Nie Z R, Jin T N, Zou J X, et al. Development on Research of Advanced Rare-Earth Aluminum Alloy[J]. Transactions of Nonferrous Metals Society of China, 2003, 13(3): 509-514.

[4] Xiao D H, Wang J N, Ding D Y, et al. Chen. Effect of Cu Content on the Mechanical Properties of An Al-Cu-Mg-Ag Alloy[J]. Journal of Alloys and Compounds, 2002, 343: 77-81.

[5] Zhao D G, Liu X F, Pan Y C, et al. Microstructure and Mechanical Properties of In Situ Synthesized (TiB2+Al₂O₃)/Al-Cu Composites[J]. Journal of Materials Processing Technology, 2007, 189: 237-241.

[6] Jang J H, Nam D G, Park Y H, et al. Effect of Solution Treatment and Artificial Aging on Microstructure and Mechanical Properties of Al-Cu Alloy[J]. Transactions of Nonferrous Metals Society of China, 2013, 23: 631-635.

[7] Zeren M. Effect of Copper and Silicon Content on Mechanical Properties in Al-Cu-Si-Mg Alloys[J]. Journal of Materials Processing Technology, 2005, 169(2): 292-298.

[8] Liu X Y, Pan Q L, Lu C G, et al. Microstructure and Mechanical Properties of Al-Cu-Mg-Mn-Zr Alloy with Trace Amounts of Ag[J]. Materials Science and Engineering A, 2009, 525: 128-132.

[9] Wan W W, Han J M, Li W J, et al. Study of Rare Earth Element Effect on Microstructures and Mechanical Properties of An Al-Cu-Mg-Si Cast Alloy[J]. Rare Metals, 2006, 25: 129-132.

[10] Xu G F, Nie Z R, Jin T N, et al. Microstructure and Properties of Al-4Cu Alloy Containing Sc[J]. Transactions of Nonferrous Metals Society of China, 2004, 1: 63-66.

[11] Zhao H L, Yao D M, Qiu F, et al. High Strength and Good Ductility of Casting Al-Cu Alloy Modified by Pr_xO_y and LaxOy[J]. Journal of Alloys and Compounds, 2011, 509: L43-L46.

[12] Han N, Bian X F, Li Z K, et al. Effect of Si on Microstructure and Mechanical Properties of the Al-4.5% Cu Alloys[J]. Acta Metallurgica Sinica (English Letters), 2006, 19(6): 405-410.

[13] Qiu H X, Yan H, Hu Z. Effect of Samarium (Sm) Addition on the Microstructures and Mechanical Properties of Al-7Si-0.7Mg Alloys[J]. Journal of Alloys and Compounds, 2013, 567: 77-81.

[14] Nogita K, McDonald S D, Dahle A K. Eutectic Modification of Al-Si Alloys with Rare Earth Metals[J]. Materials Transactions, 2004, 45(2): 323-326.

[15] Son S T, Lee J S, Kim D G, et al. Effects of Samarium (Sm) Additions on the Microstructure and Mechanical Properties of As-cast and Hotextruded Mg-5 wt%Al-3 wt%Ca-based Alloys[J]. Journal of Alloys and Compounds, 2009, 473(1-2): 446-452.

[16] Wang J L, Wang L D, Wu Y M, et al. Effects of Samarium on Microstructures and Tensile Properties of Mg-5Al-0.3Mn Alloy[J]. Materials Science and Engineering A, 2011, 528: 4115-4119.

[17] Tsai Y C, Chou C Y, Lee S L, et al. Effect of Trace La Addition on the Microstructures and Mechanical Properties of A356 (Al-7Si-0.35Mg) Aluminum Alloys[J]. Journal of Alloys and Compounds, 2009, 487: 157-162.

[18] Wiesner U, Bieger W, Krabbes G. Determination of Phase Diagrams by Heat Evaluation from DTA[J]. Thermochimica Acta, 1996, 290: 115-121.

[19] Li C J, Yang H, Ren Z M, et al. Application of Differential Thermal Analysis to Investigation of Magnetic Field Effect on Solidification of Al-Cu Hypereutectic Alloy[J]. Journal of Alloys and Compounds, 2010, 505: 108-112.

[20] Lee J C, Byun J Y, Park S B, et al. Prediction of Si Contents to Supperss the Formation of Al4C3 in the SiCp/Al Composite[J]. Acta Metallurgica Sinica (English Letters), 1998, 46(5): 1771-1780.

[21] Song M, Chen K H, Huang L P. Effects of Ag Addition on Mechanical Properties and Microstructures of Al-8Cu-0.5Mg Alloy[J]. Transactions of Nonferrous Metals Society of China, 2006, 16: 766-771.

[22] Hall E O. The Deformation and Ageing of Mild Steel: III Discussion of Results[J]. Proceedings of the Physical Society Section B, 1951, 64(9): 747-753.

[23] Mallikarjuna C, Shashidhara S M, Mallik U S. Evaluation of Grain Refinement and Variation in Mechanical Properties of Equal-channel Angular Pressed 2014 Aluminum Alloy[J]. Materials & Design, 2009, 30(5): 1638-1642.

[24] Keiichiro O, Isao S, Junichi O. Effect of Silicon Addition on Grain Refinement of Copper Alloys[J]. Materials Letters, 2003, 57: 2280-2286.

[25] Karnesky R A V, Dalen M E, Dunand D C, et al. Effects of Substituting Rare-earth Elements for Scandium in a Precipitationstrengthened Al-0.08 at%Sc Alloy[J]. Scripta Materialia, 2006, 55: 437-440.

[26] Van Dalen M E, Dunand D C, Seidman D N. Effects of Ti Additions on the Nanostructure and Creep Properties of Precipitation-strengthened Al-Sc Alloys[J]. Acta Materialia, 2005, 53: 4225-4235.

[27] Hu X W, Jiang F G, Ai F R, et al. Effects of Rare Earth Er Additions on Microstructure Development and Mechanical Properties of Die-cast ADC12 Aluminum Alloy[J]. Journal of Alloys and Compounds, 2012, 538: 21-27.