Multi-scale modeling of the ionic diffusivity of cement-based materials

Abstract

A new multiscale numerical approach was presented to predict the ionic diffusivity of cement based materials, which incorporated the lattice Boltzmann method, the conjugate gradient method, and the random walk method. In particular, the lattice Boltzmann method was applied to model the ionic diffusion in pore space of cement paste, while the upscaling of effective ionic diffusivity from cement paste (mortar) to concrete was processed by means of the conjugate gradient method and the random walk method. A case study was then presented, i e, the chloride diffusivity of concrete affected by sand content and gravel content. It is shown that the results of numerical prediction agree well with those of experimental measurements adopted from literatures. The multiscale numerical approach provides a prior assessment of ionic diffusivity for cement based materials from a microstructural basis.

Keywords

multiscale approach / lattice boltzmann method / conjugate gradient method / random walk method

References

[1] Atkinson A, Nickerson A K. The Diffusion of Ions through Water-Saturated Cement[J]. Journal of Materials Science, 1984, 19(9): 3 068-3 078.

[2] Angst U M, Elsener B, Larsen C K, et al. Chloride Induced Reinforcement Corrosion: Electrochemical Monitoring of Initiation Stage and Chloride Threshold Values[J]. Corrosion Science, 2011, 53(4): 1 451-1 464.

[3] Sun G, Zhang Y, Sun W, et al. Multi-scale Prediction of the Effective Chloride Diffusion Coefficient of Concrete[J]. Construction and Building Materials, 2011, 25(10): 3 820-3 831.

[4] Garboczi E J, Bentz D P. Multiscale Analytical/Numerical Theory of the Diffusivity of Concrete[J]. Advanced Cement Based Materials, 1998, 8(2): 77-88.

[5] Maekawa K, Ishida T, Kishi T. Multi-scale Modeling of Concrete Performance[J]. Journal of Advanced Concrete Technology, 2003, 1(2): 91-126.

[6] Luping T, Nilsson L O. Chloride Binding Capacity and Binding Isotherms of OPC Pastes and Mortars[J]. Cement and Concrete Research, 1993, 23(2): 247-253.

[7] Garboczi E J, Bentz D P. Computer Simulation of the Diffusivity of Cement-Based Materials[J]. Journal of Materials Science, 1992, 27(8): 2 083-2 092.

[8] Curtin W A. Accurate DC Conductivity for Hopping Conduction within the Continuous Time Random Walk Approach[J]. The Journal of Physical Chemistry B, 2000, 104(16): 3 937-3 941.

[9] Alvarez-Ramírez J, Nieves-Mendoza S, González-Trejo J. Calculation of the Effective Diffusivity of Heterogeneous Media Using the Lattice-Boltzmann Method[J]. Physical Review E, 1996, 53(3): 2

[10] Martys N S. Diffusion in Partially-Saturated Porous Materials[J]. Materials and Structures, 1999, 32(8): 555-562.

[11] Zhang M, Ye G, Van Breugel K. Modeling of Ionic Diffusivity in Non-Saturated Cement-Based Materials Using Lattice Boltzmann Method[J]. Cement and Concrete Research, 2012, 42(11): 1 524-1 533.

[12] Zalzale M, McDonald P J. Lattice Boltzmann Simulations of the Permeability and Capillary Adsorption of Cement Model Microstructures[J]. Cement and Concrete Research, 2012, 42(12): 1 601-1 610.

[13] Xuan Y M, Zhao K, Li Q. Investigation on Mass Diffusion Process in Porous Media Based on Lattice Boltzmann Method[J]. Heat and Mass Transfer, 2010, 46(10): 1 039-1 051.

[14] Caré S. Influence of Aggregates on Chloride Diffusion Coefficient into Mortar[J]. Cement and Concrete Research, 2003, 33(7): 1 021-1 028.

[15] Yang C C, Su J K. Approximate Migration Coefficient of Interfacial Transition Zone and the Effect of Aggregate Content on the Migration Coefficient of Mortar[J]. Cement and Concrete Research, 2002, 32(10): 1 559-1 565.

[16] Princigallo A, Van Breugel K, Levita G. Influence of the Aggregate on the Electrical Conductivity of Portland Cement Concretes[J]. Cement and Concrete Research, 2003, 33(11): 1 755-1 763.

[17] Jakobsen U H, Laugesen P, Thaulow N. Determination of Water-Cement Ratio in Hardened Concrete by Optical Fluorescence Microscopy[J]. ACI Special Publication, 1999 191-193.

[18] Scrivener K L, Crumbie A K, Laugesen P. The Interfacial Transition Zone (ITZ) between Cement Paste and Aggregate in Concrete[J]. Interface Science, 2004, 12(4): 411-421.

[19] Vamos C, Suciu N, Vereecken H. Generalized Random Walk Algorithm for the Numerical Modeling of Complex Diffusion Processes[J]. Journal of Computational Physics, 2003, 186(2): 527-544.

[20] Liu L, Sun W, Ye G, et al. Estimation of the Ionic Diffusivity of Virtual Cement Paste by Random Walk Algorithm[J]. Construction and Building Materials, 2012, 28(1): 405-413.

[21] Vamos C, Suciu N, Vereecken H. Generalized Random Walk Algorithm for the Numerical Modeling of Complex Diffusion Processes[J]. Journal of Computational Physics, 2003, 186(2): 527-544.

[22] Liu Z, Zhang Y, Jiang Q, et al. Solid Phases Percolation and Capillary Pores Depercolation in Hydrating Cement Pastes[J]. Journal of Materials in Civil Engineering, 2014

[23] Gao Y, De Schutter G, Ye G. Micro-and Meso-Scale Pore Structure in Mortar in Relation to Aggregate Content[J]. Cement and Concrete Research, 2013, 52: 149-160.

[24] Bentz D P. Influence of Silica Fume on Diffusivity in Cement-Based Materials: II. Multi-Scale Modeling of Concrete Diffusivity[J]. Cement and Concrete Research, 2000, 30(7): 1 121-1 129.

[25] Yang C C, Su J K. Approximate Migration Coefficient of Interfacial Transition Zone and the Effect of Aggregate Content on the Migration Coefficient of Mortar[J]. Cement and Concrete Research, 2002, 32(10): 1 559-1 565.

[26] Shane J D, Mason T O, Jennings H M, et al. Effect of the Interfacial Transition Zone on the Conductivity of Portland Cement Mortars[J]. Journal of the American Ceramic Society, 2000, 83(5): 1 137-1 144.

[27] Aïtcin P-C. High Performance Concrete[M], 2011 Boca Raton: CRC Press.