Mechanical properties and fracture behaviour of multilayer alumina composites

Abstract

Adopting a ceramic/polymer multilayer structure design to simulate the structure of nacre is usually believed to be an effective way to increase the toughness of ceramic composites at the expense of the material's bending strength. However, in this study, we found that both the bending strength and the toughness could be improved simultaneously when using a certain Al₂O₃/Kevlar multilayer composite design compared to pure alumina samples with the same dimensions. The fracture behaviour of the Al₂O₃/Kevlar multilayer composite was studied to find a reason for this improvement. The results showed that the complex and asymmetrical stresses occurring in the Kevlar-reinforced layers were the main reason for the differences in fracture behaviour. We expect our results to open up new ways for the design of future high performance ceramic composites.

Keywords

biomaterials / alumina / multilayer composite / toughening

References

[1] Clegg W J, Kendall K, Alford N M. A Simple Way to Make Tough Ceramics[J]. Nature, 1990, 347(10): 445-447.

[2] Phillipps A J, Clegg W J, Clyne T W. Fracture Behavior of Ceramic Laminates in Bending-I. Modelling of Crack Propagation [J]. Acta Metall. atMater., 1993, 41(3): 805-817.

[3] Phillipps A J, Clegg W J, Clyne T W. Fracture Behavior of Ceramic Laminates in Bending-II. Comparison of Model Predictions with Experimental Data [J]. Acta Metall. Mater., 1993, 41(3): 819-827.

[4] Folsom C A, Zok W F, Lange F F. Flexural Properties of Brittle Multilayer Materials: I, Modelling [J]. J. Am. Ceram. Soc., 1994, 77(3): 689-696.

[5] Folsom C A, Zok W F, Lange F F. Flexural Properties of Brittle Multilayer Materials: I, Experiments [J]. J. Am. Ceram. Soc., 1994, 77(8): 2081-2087.

[6] Kaplan D L. Mollusc Shell Structures: Novel Design Strategies for Synthetic Materials [J]. Biomaterials, 1998, 3: 232-236.

[7] Jackson A P, Vincent J F V, Turner R M. The Mechanical Design of Nacre [J]. Proceedings of the Royal Society of London, Series B, Biological Sciences, 1988, B234: 415-440.

[8] Zuo K H, Jiang D L, Lin Q L. Fabrication and Interfacial Structure of Al₂O₃/Ni Laminar Ceramics [J]. Ceramics International, 2006, 32(6): 613-616.

[9] Huang Q L, Pan W. On Properties and Microstructure of Al₂O₃/ W Laminated Composite[J]. Journal of Guangxi University for Nationalities (Natural Science Edition), 1998, 4: 24-27.

[10] Kovar D, Thouless M D, Halloran J W. Crack deflection and Propagation in Layered Silicon Nitride Boron Nitride Ceramics [J]. Journal of the American Ceramic Society, 1998, 81(4): 1104-1112.

[11] She J, Inoue T, Ueno K. Multilayer Al2O3/SiC Ceramics with Improved Mechanical Behavior [J]. Journal of the European Ceramic Society, 2000, 20: 1771-1775.