Enhancement and optimization of ATO nano-crystalline films properties by the addition of acetylacetone as modifier in the sol-gel process

Abstract

Sb-doped SnO₂ (ATO) thin films have been prepared using the spin coating method by selecting the proper amount of acetylacetone as solution modifier. All ATO powders and films exhibited the cassiterite rutile-like structure in a crystal size below 10 nm under all the experimental conditions and a nonpreviously reported crystal structure was observed at high acetylacetone loads. The acetylacetone molar ratio influenced notably the optical and electrical properties of ATO films. When prepared at an acetylacetone molar ratio of 4, ATO films exhibited optical transparencies above 90% in the visible region and above 40% in the UV region for thicknesses of 100 and 300 nm. Films in a thickness of 100 nm and at an annealing temperature of 650 °C accounted for a high transparency of 97% in the visible wavelength. Films prepared at an acetylacetone molar ratio of 4 exhibited an electric resistivity of 1.33×10^-3 Ω·cm at an annealing temperature of 650 °C. The optimal Sb content for ATO films was found to be 8 at%. The relationships among the properties of starting solutions, the experimental parameters, and properties of ATO films are discussed.

Keywords

tin oxide films / antimony doping / acetylacetone / optical transparency / electric properties

References

[1] Ginley D. Handbook of Transparent Conductors [M], 2010 NewYork: Springer.

[2] Stadler A. Transparent Conducting Oxides-An Up-to-date Overview [J]. Materials (Basel), 2012, 5: 661-683.

[3] Kim K S, Yoon S Y, Lee W J, et al. Surface Morphologies and Electrical Properties of Antimony-doped Tin Oxide Films Deposited by Plasma-enhanced Chemical Vapor Deposition [J]. Surf. Coatings Technol., 2001, 138: 229-236.

[4] Montero J G, n C, Herrero J. Discharge Power Dependence of Structural, Optical and Electrical Properties of DC Sputtered Antimony Doped Tin Oxide (ATO) Films [J]. Sol. Energy Mater. Sol. Cells, 2011, 95: 2113-2119.

[5] Chen F, Li N, Shen Q, et al. Fabrication of Transparent Conducting ATO Films Using the ATO Sintered Targets by Pulsed Laser Deposition [J]. Sol. Energy Mater. Sol. Cells, 2012, 105: 153-158.

[6] Thangaraju B. Structural and Electrical Studies on Highly Conducting Spray Deposited Fluorine and Antimony Doped SnO2 Thin Films from SnCl2 Precursor [J]. Thin Solid Films, 2002, 402: 71-78.

[7] Guzman G, Dahmani B, Puetz J, et al. Transparent Conducting Sol-gel ATO Coatings for Display Applications by an Improved Dip Coating Technique [J]. Thin Solid Films, 2006, 502: 281-285.

[8] Leite E R, Lee E, J H, Ribeiro C, et al. Controlled Thickness Deposition of Ultrathin Ceramic Films by Spin Coating [J]. J. Am. Ceram. Soc., 2006, 89: 2016-2020.

[9] Sakka S. Handbook of Sol-gel Science and Technology. 1. Sol-gel Processing [M], 2005 NewYork: Springer.

[10] Facchetti A, Marks T J. Transparent Electronics: from Synthesis to Applications[M], 2010 Chichester: John Willey & Sons.

[11] Peelaers H, Kioupakis E, Van de Walle C G. Fundamental Limits on Optical Transparency of Transparent Conducting Oxides: Free-carrier Absorption in SnO₂ [J]. Appl. Phys. Lett., 2012, 100: 011914.

[12] Medvedeva J E. Unconventional Approaches to Combine Optical Transparency with Electrical Conductivity [J]. Appl. Phys. A, 2007, 89: 43-47.

[13] Boudiar T, Sandu C S, Canut B, et al. Interest of Rapid Thermal Annealing (RTA) for the Elaboration of SnO₂:Sb Transparent Conducting Oxide by the Sol-gel Technique [J]. J. Sol-Gel Sci. Technol., 2003, 26: 1067-1070.

[14] Ganz D, Gasparro G, Aegerter M A. Laser Sintering of SnO₂:Sb Solgel Coatings [J]. J. Sol-Gel Sci. Technol., 1998, 13: 961-967.

[15] Lim T, Kim C, Kim B, et al. Effect of N₂ Gas Annealing and SiO2 Barrier on the Optical Transmittance and Electrical Resistivity of a Transparent Sb-doped SnO₂ Conducting Film [J]. J. Mater. Sci. Mater. Electron., 2005, 16: 71-76.

[16] Leite E R, Bernardi M I B, Longo E, et al. Enhanced Electrical Property of Nanostructured Sb-doped SnO₂ Thin Film Processed by Soft Chemical Method [J]. Thin Solid Films, 2004, 449: 67-72.

[17] Chen X C. Effect of Oxalic Acid on Stabilization and Property of Sbdoped Tin Oxide Sol [J]. J. Sol-Gel Sci. Technol., 2005, 34: 267-271.

[18] Mayer P, Gerber T I, Buyambo B, et al. Coordination Behaviour of Acetylacetone-derived Schiff Bases towards Rhenium(I) and (V) [J]. Polyhedron, 2009, 28: 1174-1178.

[19] Le Bahers T, Pauporté T, Labat F, et al. Acetylacetone, an Interesting Anchoring Group for ZnO-based Organic-inorganic Hybrid Materials: a Combined Experimental and Theoretical Study [J]. Langmuir, 2011, 27: 3442-3450.

[20] Weng L, Bao X, Sagoe-crentsil K. Effect of Acetylacetone on the Preparation of PZT Materials in Sol-gel Processing [J]. Mater. Sci. Eng. B, 2002, 96: 307-312.

[21] Zhong X, Yang B, Zhang X, et al. Effect of Calcining Temperature and Time on the Characteristics of Sb-doped SnO₂ Nanoparticles Synthesized by the Sol–gel Method [J]. Particuology, 2012, 10: 365-370.

[22] Guglielmi M, Menegazzo E, Paolizzi M, et al. Sol-Gel Deposited Sbdoped Tin Oxide Films [J]. J. Sol-Gel Sci. Technol., 1998, 683: 679-683.

[23] Krunks M, Oja I, Tonsuaadu K, et al. Thermoanalytical Study of Acetylacetonate-modified Titanium (IV) Isopropoxide as a Precursor for TiO2 Films [J]. J. Therm. Anal. Calorim., 2005, 80: 483-488.

[24] Brinker C, Scherer G. Sol-gel Science: the Physics and Chemistry of Sol-gel Processing [M], 1990 London: Academic Press.

[25] Li P, Jiang W, Li F. Non-aqueous Sol-gel Preparation of Carbonsupported Nickel Nanoparticles [J]. J. Sol-Gel Sci. Technol., 2012, 65: 359-366.

[26] Shokr E K, Wakkad M M, El-ghanny H A A, et al. Sb-doping Effects on Optical and Electrical Parameters of SnO2 Films [J]. J. Phys. Chem. Solids, 2000, 61: 75-85.

[27] Lin Y, Wu A T, Ku C, et al. Analysis of Chlorine Ions in Antimonydoped Tin Oxide Thin Film Using Synchrotron Grazing Incidence X-ray Diffraction [J]. Jpn. J. Appl. Phys., 2012, 51: 1-4.

[28] Woo D C, Koo C Y, Ma H C, et al. Characterization of Sol-gel Derived Antimony-doped Tin Oxide Thin Films for Transparent Conductive Oxide Application [J]. Trans. Electr. Electron. Mater., 2012, 13: 241-244.

[29] Lee S U, Hong B, Boo J H. The Effect of Annealing Atmospheres on Structural, Electrical and Optical Properties of the ATO Films Prepared by RF Magnetron Sputtering [J]. Funct. Mater. Lett., 2010, 3: 119-123.

[30] Giraldi T R, Escote M T, Bernardi M I B, et al. Effect of Thickness on the Electrical and Optical Properties of Sb Doped SnO₂ (ATO) Thin Films [J]. J. Electroceramics, 2004, 13: 159-165.