Preparation and piezoelectric properties of CuO-added (Ag_0.75Li_0.1Na_0.1K_0.05)NbO₃ lead-free ceramics

Abstract

CuO-doped (Ag_0.75Li_0.1Na_0.1K_0.05)NbO₃ (ALNKN-xCuO, x = 0–2mol%) lead-free piezoelectric ceramics were prepared by the solid-state reaction method in air atmosphere. The effects of CuO addition on the phase structure, microstructure, and piezoelectric properties of the ceramics were investigated. The experimental results show that the ALNKN ceramics without doping CuO possess rhombohedral phase along with K2Nb6O16-type phase and metallic silver phase. For all of the CuO-doped ALNKN ceramics, a pure perovskite structure with the orthorhombic phase was obtained by enclosing the samples in a corundum tube. A homogeneous microstructure with the grain size of about 1 μm was formed for the ceramics with 0.5mol% CuO. The grain size increases with increasing amount of CuO. The temperature dependence of dielectric properties indicates that the ferroelectric phase of the ALNKN-xCuO ceramics becomes less stable with the addition of CuO. The ceramics with x = 1mol% exhibit relatively good electrical properties along with a high Curie temperature. These results will provide a helpful guidance to preparing other AN-based ceramics by solid-state reaction method in air atmosphere.

Keywords

Ag_0.75Li_0.1Na_0.1K_0.05)NbO₃ / lead-free ceramics / piezoelectric properties / CuO

References

[1] Saito Y, Takao H, Tani T, et al. Lead-Free Piezoceramics[J].. Nature, 2004, 432(7013): 84-87.

[2] Liu WF, Ren XB. Large Piezoelectric Effect in Pb-Free Ceramics[J]. Phys. Rev. Lett., 2009, 103: 257602-1-257602-4

[3] Zhang J, Lu WZ, Fan GF, et al. Microstructures and Electrical Properties of Bi0.5(Na1-x-yKxLiy)0.5TiO3 Lead-free Piezoelectric Ceramics [J]. J. Wuhan Univ. Technol. Mater. Sci. Ed., 2010, 25(3): 361-364.

[4] Shigemi A, Wada T. Crystallographic Phase Stabilities and Electronic Structures in AgNbO3 by First-Principles Calculation[J].. Mol. Simul., 2008, 34(10-15): 1105-1114.

[5] Fu D, Endo M, Taniguchi H, et al. Piezoelectric Properties of Lithium Modified Silver Niobate Perovskite Single Crystals[J]. Appl. Phys. Lett., 2008, 92: 172905-1-172905-3

[6] Fu D, Endo M, Taniguchi H, et al. AgNbO3: A Lead-Free Material with Large Polarization and Electromechanical Response[J]. Appl. Phys. Lett., 2007, 90: 252907-1−252907-3

[7] Fu D, Endo M, Taniguchi H, et al. Ferroelectricity of Li-Doped Silver Niobate (Ag, Li)NbO3[J]. J. Phys.: Condens. Matter, 2011, 23: 075 901-1−075901-7

[8] Valant M, Axelsson AK, Alford N. Review of Ag(Nb, Ta)O3 as a Functional Material[J].. J. Eur. Ceram. Soc., 2007, 27(7): 2549-2560.

[9] Sakabe Y, Takeda T, Ogiso Y, et al. Ferroelectric Properties of (Ag, Li) (Nb, Ta)O3 Ceramics[J].. Jpn. J. Appl. Phys., Part 1, 2001, 40(9B): 5675-5678.

[10] Takeda T, Takahashi Y, Wada N, et al. Effects of Substitution of Na and K Ions for Ag Ion in (Ag, Li)NbO3 Ceramics[J].. Jpn. J. Appl. Phys., Part 1, 2003, 42(9B): 6023-6026.

[11] Saito A, Uraki S, Kakemoto H, et al. Growth of Lithium Doped Silver Niobate Single Crystals and Their Piezoelectric Properties[J].. Mater. Sci. Eng. B, 2005, 120(1-3): 166-169.

[12] Fu D, Itoh M, Koshihara S. Dielectric, Ferroelectric, and Piezoelectric Behaviors of AgNbO3-KNbO3 Solid Solution[J]. J. Appl. Phys., 2009, 106: 104104-1–104104-6

[13] Fu D, Arioka T, Taniguchi H, et al. Ferroelectricity and Electromechanical Coupling in (1-x)AgNbO3-xNaNbO3 Solid Solutions[J]. Appl. Phys. Lett., 2011, 99: 12904-1-012904-3

[14] Cho JH, Chun MP, Nam JH, et al. New Lead-Free Piezoelectric Ceramics in Ternary AgNbO3-NaNbO3-KNbO3 Solid Solutions[J].. J. Korean Phys. Soc., 2010, 57(4): 859-862.

[15] Valant M, Suvorov D, Meden A. New High-Permittivity AgNb1−x TaxO3 Mmicrowave Ceramics. Part I. Crystal Structures and Phase Decomposition Relations[J].. J. Am. Ceram. Soc., 1999, 82(1): 81-87.

[16] Duguey S, Lebourgeois R, Grattepain C, et al. Study of Copper Substitutions in Ag(NbxTa1-x)O3 Solid Solutions[J].. J. Eur. Ceram. Soc., 2007, 27(2-3): 1171-1175.

[17] Li E, Kakemoto H, Wada S, et al. Influence of CuO on the Structure and Piezoelectric Properties of the Alkaline Niobate-Based Lead-Free Ceramics[J].. J. Am. Ceram. Soc., 2007, 90(6): 1787-1791.

[18] Oh Y, Yoo J. Microstructural, Piezoelectric Properties and Temperature Stability in Li0.02(Na0.55K0.45)0.98[(Nb0.77Ta0.18Sb0.05)1-2x/5Cux]O3 Ceramics for Piezoelectric Actuator[J].. Mater. Lett., 2012, 79: 180-183.

[19] Wu L, Liu NM, Zhou F, et al. Effects of Li Content on the Phase Structure and Electrical Properties of Lead-Free (Ag0.85-xLixNa0.1K0.05) NbO3 Piezoelectric Ceramics[J]. J. Appl. Phys., 2012, 111: 054105-1-054105-4

[20] Zhao P, Zhang BP, Li JF. High Piezoelectric d33 Coefficient in Li-Modified Lead-Free (Na,K)NbO3 Ceramics Sintered at Optimal Temperature[J]. Appl. Phys. Lett., 2007, 90: 242909-1-242909-3

[21] Park HY, Ahn CW, Cho KH, et al. Low-Temperature Sintering and Piezoelectric Properties of CuO-Added 0.95(Na0.5K0.5)NbO3-0.05BaTiO3 Ceramics[J].. J. Am. Ceram. Soc., 2007, 90(12): 4066-4069.

[22] Uchino K. Ferroelectric Devices[M], 2000 New York: Marcel Dekker Inc.. 275-303.

[23] Shannon RD. Revised Effective Ionic Radii and Systematic Studies of Interatomic Distances in Halides and Chalcogenides[J].. Acta. Cryst., 1976, A32: 751-767.