Synthesis and characterization of polythiophenes bearing diphenyl groups in the conjugated chain

Abstract

4,4′-dibromo-2-nitro-biphenyl and 4,4′-dibromo-2,3′-dinitro-biphenyl have been synthesized via nitration reaction with 4,4′-dibromobiphenyl as the raw material. Three novel thiophene derivatives, 4, 4′-di(4-hexyl-thiophen-2-yl)biphenyl, 4,4′-di(4-hexyl-thiophen-2-yl)-2-nitro-biphenyl and 4,4′-di(4-hexyl-thiophen-2-yl)-2,3′-dinitrobiphenyl were synthesized through Stille coupling reaction, followed by polymerization in the presence of FeCl₃, respectively. UV-vis absorption spectra, fluorescence spectra, photoluminescence spectra and electrochemical properties of the polymers were investigated. And the band-gap (E _g), HOMO orbital energy (E _HOMO), and LUMO orbital energy (E _LUMO) of the polymers were calculated. Among the polymers, polymer PBTN and PBTD show lower band-gap (2.67 and 2.63 eV), lower HOMO energy level (−5.38 and −5.4 eV) and broader wavelength (432 and 438 nm) than that of polymer PBTB (2.69 eV, -5.36 eV and 424 nm) with incorporation of one nitro group or two nitro groups in the main chain, respectively.

Keywords

polythiophene / biphenyl / nitro group / stille coupling reaction

References

[1] Service R F. Outlook Brightens for Plastic Solar Cells[J]. Science, 2011, 332: 293-294.

[2] Chu T Y, Lu J P, Beaupré S, et al. Bulk Heterojunction Solar Cells Using Thieno[3,4-c]pyrrole-4,6-dione and Dithieno[3,2-b:2′,3′-d]silole Copolymer with a Power Conversion Efficiency of 7.3%3%[J]. J. Am. Chem. Soc., 2011, 133: 4 250-4 25.

[3] Park S H, Roy A, Beaupre S, et al. Bulk Heterojunction Solar Cells with Internal Quantum Efficiency Approaching 100%[J]. Nat. Photonics, 2009, 3: 297-302.

[4] Cai W, Gong X, Cao Y. Effects of Substrate Temperature on the Structural and Electrical Properties of Cu(In,Ga)Se₂ Thin Films[J]. Solar Energy Materials & Solar Cells, 2010, 94: 114-118.

[5] Liang Y, Wu Y, Feng D, et al. Development of New Semiconducting Polymers for High Performance Solar Cells[J]. J. Am. Chem. Soc., 2008, 131: 56-57.

[6] Huang Y, Wang Y, Sang G Y, et al. Polythiophene Derivative with the Simplest Conjugated-Side-Chain of Alkenyl: Synthesis and Applications in Polymer Solar Cells and Field-Effect Transistors[J]. J. Phys. Chem. B, 2008, 112: 13 476-13 482.

[7] Mierloo S V, Hadipour A, Spijkman M J, et al. Improved Photovoltaic Performance of a Semicrystalline Narrow Bandgap Copolymer Based on 4H -Cyclopenta[2,1-b:3,4-b’]_dithiophene Donor and Thiazolo [5,4-d] thiazole Acceptor Units[J]. Chem. Mater., 2012, 24: 587-593.

[8] Wang M, Hu X W, Liu P, et al. Donor-Acceptor Conjugated Polymer Based on Naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for High-Performance Polymer Solar Cells[J]. J. Am. Chem. Soc., 2011, 133: 9 638-9 641.

[9] Yang T B, Wang M, Duan C H, et al. Inverted Polymer Solar Cells with 8.4% Efficiency by Conjugated Polyelectrolyte[J]. Energy Environ. Sci., 2012, 5: 8 208-8 214.

[10] Scharber M C, Mühlbacher D, Koppe M, et al. Design Rules for Donors in Bulk-Heterojunction Solar Cells-Towards 10% Energy-Conversion Efficiency[J]. Adv. Mater., 2006, 18: 789-794.

[11] Jiang J M, Yang P A, Chen H C, et al. Synthesis, Characterization, and Photovoltaic Properties of a Low-bandgap Copolymer Based on 2,1,3-benzooxadiazole[J]. Chem. Commun., 2011, 47: 8 877-8 879.

[12] Francesco B, Gianluca M F, Francesco N, et al. Fluorinated Organic Materials for Electronic and Optoelectronic Applications: the Role of the Fluorine Atom[J]. Chem. Commun., 2007, 10: 1 003-1 022.

[13] Cheng Y J, Yang S H, Su C H. Synthesis of Conjugated Polymers for Organic Solar Cell Applications[J]. Chem. Rev., 2009, 109: 5 868-5 923.

[14] Wang E, Wang M, Wang L, et al. Donor Polymers Containing Benzothiadiazole and Four Thiophene Rings in Their Repeating Units with Improved Photovoltaic Performance[J]. Macromolecules, 2009, 42: 4 410-4 415.

[15] Roncali J. Synthetic Principles for Bandgap Control in Linear π-Conjugated Systems[J]. Chem.Rev., 1997, 97: 173-206.