Microstructure and properties of cement foams prepared by magnesium oxychloride cement

Abstract

Microstructural features including pore size distribution, cell walls and phase compositions of magnesium oxychloride cement foams (MOCF) with various MgO powders and water mixture ratios were studied. Their influences on compressive strength, water absorption and resistance of MOCF were also discussed in detail. The experimental results indicated that moderate and slight excess MgO powders (MgO/MgCl₂ molar ratios from 5.1 to 7) were beneficial to the formation of excellent microstructure of MOCF, but increasing water contents (H₂O/MgO mass ratios from 0.9 to 1.29) might result in opposite conclusions. The microstructure of MOCF produced with moderate and slight excess MgO powders could enhance the compressive strength, while serious excess MgO powders addition (MgO/MgCl₂ molar ratios = 9) would destroy the cell wall structures, and therefore decrease the strength of the system. Although MOCF produced with excess MgO powders could decrease the water absorption, its softening coefficient was lower than that of the material produced with moderate MgO powders. This might be due to the instability of phase 5, the volume expansion and cracking of cell walls as immersed the sample into water.

Keywords

magnesium oxychloride cement foams / pore size distribution / weibull distribution function / cell walls / phase compositions / properties

References

[1] Ramamurthy K, Nambiar EKK, Ranjani GIS A Classification of Studies on Properties of Foam Concrete[J]. Cement Concrete Comp., 2009, 31: 388-396.

[2] Akthar FK, Evans JRG High Porosity (>90%) Cementitious Foams[J]. Cement Concrete Res., 2010, 40: 352-358.

[3] Aguilar AS, Melo JP, Olivares FH Microstructural Analysis of Aerated Cement Pastes with Fly Ash, Metakaolin and Sepiolite Additions[J]. Constr. Build. Mater., 2013, 47(0): 282-292.

[4] Hung TC, Huang JS, Wang YW, . Microstructure and Properties of Metakaolin-based Inorganic Polymer Foams[J]. J. Mater. Sci., 2013, 48(21): 7 446-7 455.

[5] Li Z, Chau CK Influence of Molar Ratios on Properties of Magnesium Oxychloride Cement[J]. Cement Concrete Res., 2007, 37(6): 866-870.

[6] Chau CK, Li Z Accelerated Reactivity Assessment of Light Burnt Magnesium Oxide[J]. J. Am. Ceram. Soc., 2008, 91(5): 1 640-1 645.

[7] Chau CK, Li Z Microstructures of Magnesium Oxychloride[J]. Mater. Struct., 2008, 41(5): 853-862.

[8] Sglavo VM, Genua F, Conci A, . Influence of Curing Temperature on the Evolution of Magnesium Oxychloride Cement[J]. J. Mater. Sci., 2011, 46(20): 6 726-6 733.

[9] Chau CK, Chan J, Li Z Influences of Fly Ash on Magnesium Oxychloride Mortar[J]. Cement Concrete Comp., 2009, 31(4): 250-254.

[10] Li Y, Yu H, Zheng L, . Compressive Strength of Fly Ash Magnesium Oxychloride Cement Containing Granite Wastes[J]. Constr. Build. Mater., 2013, 38: 1-7.

[11] Zhang Z, Chen H, Yuan H, . Mix Proportion Design of Straw-MOC Thermal-insulation Wall Material[J]. J. Southeast U. — Nat. Sci. Ed., 2010, 40: 28-33.

[12] Nambiar EKK, Ramamurthy K Air — void Characterisation of Foam Concrete[J]. Cement Concrete Res., 2007, 37: 221-230.

[13] Deng DH The Mechanism for Soluble Phosphates to Improve the Water Resistance of Magnesium Oxychloride Cement[J]. Cement Concrete Res., 2003, 33(9): 1 311-1 317.

[14] Wee TH, Daneti SB, Tamilselvan T Effect of W/C Ratio on Airvoid System of Foamed Concrete and Their Influence on Mechanical Properties[J]. Mag. Concrete Res., 2011, 63(8): 583-595.

[15] Neithalath N, Sumanasooriya MS, Deo O Characterizing Pore Volume, Sizes, and Connectivity in Pervious Concretes for Permeability Prediction[J]. Mater. Charact., 2010, 61(8): 802-813.

[16] Huang JS, Liu KD Mechanical Properties of Cement Foams in Shear [J]. J. Mater. Sci., 2001, 36(3): 771-777.

[17] Ba H, Guan H Influence of MgO/MgCl₂ Molar Ratio on Phase Stability of Magnesium Oxychloride Cement[J]. J. Wuhan Univ. Technol.-Mater. Sci. Ed., 2009, 24(3): 476-481.

[18] Hnatahan H, Carlos JC, Chae S, . The Morphology of Entrained Air-voids in Hardened Cement Paste Generated with Different Anionic Surfactants[J]. Cement Concrete Comp., 2008, 30(7): 566-575.

[19] Cannesson E, Manier S, Nicholson JW Water Loss From Magnesia-Based Cements[J]. Ceram.-Silikaty, 2010, 54(4): 341-344.

[20] Plekhanova TA, Keriene J, Gailius A, . Structural, Physical and Mechanical Properties of Modified Wood-magnesia Composite[J]. Constr. Build. Mater., 2007, 21(9): 1 833-1 838.