Two-step synthesis of sulfur/graphene composite cathode for rechargeable lithium sulfur batteries

Jingyin Li , Na Li , Changjia Li , Yufeng Guo

Journal of Wuhan University of Technology Materials Science Edition ›› 2015, Vol. 30 ›› Issue (1) : 10 -15.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2015, Vol. 30 ›› Issue (1) : 10 -15. DOI: 10.1007/s11595-015-1091-z
Advanced Materials

Two-step synthesis of sulfur/graphene composite cathode for rechargeable lithium sulfur batteries

Author information +
History +
PDF

Abstract

Sulfur/graphene composites with different sulfur contents were prepared by two-step synthesis, where graphene was regarded as a carrier of sulfur active substance. The surface structure and crystal form of the composites obtained were characterized and compared by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). It was found that sulfur was partially coated by graphene. The graphene folds provided more nano-pores and electron transport channels for sulfur. From TGA results, the sulfur contents of the sulfur/graphene composites measured were about 42.32 wt%, 54.94 wt%, and 65.23 wt%. Electrochemical tests demonstrated that sulfur/graphene composite (x=54.94 wt%) cathode exhibited better capacity retention (40.13%) compared with the pure cathode (20.46%), where an initial discharge capacity was up to 1 500 mAh·g−1 and it remained about 600 mAh·g−1 after 30 cycles. Furthermore, the electrochemical reaction mechanism and the state of reaction interface for Li/S battery were analyzed by cyclic voltammogram and AC-impedance spectra. The results indicated that the sulfur/graphene composite with a sulfur content of 54.94 wt%, based on a two-step synthesis, contributed to improving electrochemical properties of lithium/sulfur battery

Keywords

lithium/sulfur battery / sulfur/graphene composite / two-step synthesis / electrochemical properties

Cite this article

Download citation ▾
Jingyin Li, Na Li, Changjia Li, Yufeng Guo. Two-step synthesis of sulfur/graphene composite cathode for rechargeable lithium sulfur batteries. Journal of Wuhan University of Technology Materials Science Edition, 2015, 30(1): 10-15 DOI:10.1007/s11595-015-1091-z

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Armand M, Tarascon J-M Building Better Batteries [J]. Nature, 2008, 451: 652-654.

[2]

Yongsub Y, Chanhwi P, Junghoon K, . Lattice Orientation Control of Lithium Cobalt Oxide Cathode Film for All-Solid-State Thin Film Batteries [J]. J. Power Sources, 2013, 226: 186-190.

[3]

Xiao L, Zhao Y, Yang Y, . Electrochemical Properties of Nano-Crystalline LiNi0.5Mn1.5O4 Synthesized by Polymer-Pyrolysis Method [J]. J. Solid State Electrochem, 2008, 12: 687-691.

[4]

Padhi A K, Nanjundaswamy K S, Goodenough J B Phospho-Olivines as Positive-Electrode Materials for Rechargeable Lithium Batteries [J]. J. Electrochem. Soc., 1997, 144: 1 188-1 194.

[5]

Jung Y, Kim Seok New Approaches to Improve Cycle Life Characteristics of Lithium-Sulfur Cells [J]. Electrochem. Commun., 2007, 9(2): 249-254.

[6]

Lai C, Gao X P, Zhang B, . Synthesis and Electrochemical Performance of Sulfur/Highly Porous Carbon Composites [J]. J. Phys. Chem. C, 2009, 113(11): 4 712-4 716.

[7]

Chen S, Zhai Y, Xu G, . Ordered Mesoporous Carbon/Sulfur Nanocomposite of High Performances as Cathode for Lithium-Sulfur Battery [J]. Electrochim.Acta, 2011, 56(26): 9 549-9 555.

[8]

Yin L, Wang J, Yang J, . A Novel Pyrolyzed Polyacrylonitrile-Sulfur@MWCNT Composite Cathode Material for High-Rate Rechargeable Lithium/Sulfur Batteries [J]. J.Mater.Chem., 2011, 21: 6 807-6 810.

[9]

Liang X, Wen Z, Liu Y, . Reparation and Characterization of Sulfur-Polypyrrole Composites with Controlled Morphology as High Capacity Cathode for Lithium Batteries [J]. Solid State Ionics, 2011, 192(1): 347-350.

[10]

Liang X, Liu Y, Wen Z, . A Nano-Structured and Highly Ordered Polypyrrole-Sulfur Cathode for Lithium-Sulfur Batteries [J]. J. Power Sources, 2011, 196(16): 6 951-6 955.

[11]

Geim A K, Novoselov S The Rise of Graphene [J]. Nat. Mater., 2007, 6(3): 183-191.

[12]

Li D, Richard B Graphene-Based Materials [J]. Science, 2008, 320(5880): 1 170-1 171.

[13]

Ji L, Rao M, Zheng H, . Graphene Oxide as a Sulfur Immobilizer in High Performance Lithium/Sulfur Cells [J]. J. Amer. Chem. Soc., 2011, 133: 18 522-18 525.

[14]

Wang H, Yang Y, Liang Y, . Graphene-Wrapped Sulfur Particles as a Rechargeable Lithium-Sulfur Battery Cathode Material with High Capacity and Cycling Stability [J]. Nano. Lett., 2011, 11(7): 2 644-2 647.

[15]

Zhou X, Wang F, Zhu Y, . Graphene Modified LiFePO4 Cathode Materials for High Power Lithium Ion Batteries [J]. J. Mater. Chem., 2011, 21: 3 353-3 358.

[16]

Hummers W S Jr, Offeman R E Preparation of Graphitic Oxide [J]. J. Amer. Chem. Soc., 1958, 80(6): 1 339-1 339.

[17]

Tang L, Wang Y, Li Y, . Preparation, Structure and Electrochemical Properties of Reduced Graphene Sheet Films [J]. Adv. Funct. Mater., 2009, 19(17): 2 782-2 789.

AI Summary AI Mindmap
PDF

97

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/