Improved mechanical properties in AZ31 magnesium alloys induced by impurity reduction

Abstract

Mechanical properties and microstructures of AZ31 magnesium alloys containing different impurity levels but having the same alloying element content, were investigated at ambient temperature. These AZ31 alloys were produced by semi-continuous casting, wherein the content of impurity was varied systematically. Microstructure observation shows that finer grains are existent in the alloy with lower impurity level. Tensile testing reveals that a reduction of impurity content results in a noticeable increase of the strength and elongation in the alloys in the cast, homogenized and extruded states. As the impurity content decreases from 0.0462wt% to 0.0163wt%, the ultimate tensile strength is evidently enhanced by 62 MPa and the elongation is nearly doubled in the homogenized specimen. The observed property improvement was discussed in terms of the microstructure variation with impurity reduction.

Keywords

AZ31 magnesium alloys / impurity reduction / mechanical properties / grain refinement

References

[1] Liu Z, Dong Y, Mao P, Yu J Dynamic Tensile and Compressive Properties of Vacuum and Ordinary Die-casting AT72 Magnesium Alloy at High Strain Rates [J]. J. Magnes Alloy, 2013, 1(2): 150-162.

[2] Mordike BL, Ebert T Magnesium Properties-applications-potential [J]. Mater. Sci. Eng., 2001, 302(5): 37-45.

[3] Del Valle JA, Carreno F, Ruano OA Influence of Texture and Grain Size on Work Hardening and Ductility in Magnesium-based Alloys Processed by ECAP and Rolling[J]. Acta Mater., 2006, 54: 4 247-4 259.

[4] Chang HW, Qiu D, Taylor JA, . The Role of Al2Y in Grain Refinement in Mg-Al-Y Alloy System [J]. J. Magnes. Alloy, 2013, 1(2): 115-121.

[5] Yan H, Chen R, Zheng N, . Effects of Trace Gd Concentration on Texture and Mechanical Properties of Hot-rolled Mg-2Zn-xGd Sheets [J]. J. Magnes. Alloy, 2013, 1(1): 23-30.

[6] Kim WJ, Jeong HG, Jeong HT Achieving High Strength and High Ductility in Magnesium Alloys Using Severe Plastic Deformation Combined with Low-temperature Aging [J]. Scr. Mater., 2009, 61: 1 040-1 043.

[7] Gao HT, Wu GH, Ding WJ, . Study on Fe Reduction in AZ91 Melt by B₂O₃ [J]. Mater. Sci. Eng. A, 2004, 368: 311-317.

[8] Cao P, Qian M, Stjohn DH Native Grain Refinement of Magnesium Alloys [J]. Scr. Mater., 2005, 53: 841-844.

[9] Kainer KU Magnesium Alloys and Technology[M], 2003 Weinheim WILEY-VCH Verlag GmbH 1-3.

[10] Kutsukake A, Ando S, Tsushida M, . Influence of Impurities to Deformation Behavior in Magnesium Single Crystal [J]. Key Eng. Mater., 2007, 345-316: 137-140.

[11] Wu GH, Xie M, Zhai CQ, . Purification Technology of AZ91 Magnesium Alloy Wastes [J]. Trans. Nonferrous Met. Soc. China, 2003, 13: 1 260-1 264.

[12] Chen XH, Wang JF, Tang AT, . Impurity Effect on Microstructure and Properties of Magnesium Alloys and Neutralizing Methods [J]. Mater. Rev., 2010, 24: 37-41.

[13] Pan FS, Mao JJ, Chen XH, . Influence of Impurities on Microstructure and Mechanical Properties of ZK60 Magnesium Alloy [J]. Trans. Nonferrous Met. Soc. China., 2010, 20: 1 299-1 304.

[14] Chen XH, Mao JJ, Pan FS, . Influence of Impurities on Damping Properties of ZK60 Magnesium Alloy [J]. Trans. Nonferrous Met. Soc. China, 2010, 20: 1 305-1 310.

[15] Chen XH, Pan FS, Mao JJ, . Effect of Heat Treatment on Strain Hardening of ZK60 Magnesium Alloy[J]. Mater. Des., 2011, 32(3): 1 526-1 530.

[16] Zhang H, Yan QQ, Li LX Microstructures and Tensile Properties of AZ31 Magnesium Alloy by Continuous Extrusion Forming Process [J]. Mater. Sci. Eng. A, 2008, 486: 295-299.

[17] Pan JS, Tong JM, Tian MB Basic of Materials Science [M], 1998 Beijing Tsinghua University Press 527-528.

[18] Chen XH, Pan FS, Mao JJ, . Enhancement of Rolling Formability by Impurity Reduction in AZ31 Magnesium Alloy [J]. Mater. Des., 2012, 47(1): 514-520.

[19] Courtney TH Mechanical Behavior of Materials [M], 2000 Michigan McGraw-Hill Companies, Inc 181-182.

[20] Jain A, Duygulu O, Brownb DW, Tome CN, Agnewa SR Grain Size Effects on the Tensile Properties and Deformation Mechanisms of a Magnesium Alloy, AZ31B, Sheet [J]. Mater. Sci. Eng. A, 2008, 486: 545-555.

[21] Wang YN, Chang CI, Lee CJ, . Texture and Weak Grain Size Dependence in Friction Stir Processed Mg-Al-Zn Alloy [J]. Scr. Mater., 2006, 55: 637-640.

[22] Callister JR, Callister DW Materials Science and Engineering, An Introduction [M], 2000 New York Wiley 152-153.

[23] Myshlyaev MM, Mcqueen HJ, Mwembela A, Konopleva E Twinning, Dynamic Recovery and Recrystallization in Hot Worked Mg-Al-Zn Alloy [J]. Mater. Sci. Eng. A, 2002, 337: 121-133.