Tensile strength characteristics of GFRP bars in concrete beams with work cracks under sustained loading and severe environments

Abstract

To investigate the effect of different environmental conditions of GFRP bars in concrete beams with work cracks subjected to sustained loads, the beams were exposed in indoor, freeze/thaw cycles and immersed in alkaline solution at elevated temperature. The bars were carefully extracted from the beams and tested in order to evaluate residual tensile properties. The results show that the tensile strength decreased significantly in the highly aggressive conditions but not in the natural conditions. The effect of GFRP bars casting in concrete beams demonstrated approximately 2.5% decrease of tensile strength caused by pore water environment in concrete beams on basis of those of the original bars. The effect of sustained loading plus work cracks demonstrated about 10.5% tensile strength decrease on basis of those of the bars only casted in concrete beams. The effect of environments under sustained loading plus work cracks demonstrated about 17% tensile strength decrease caused by a saturated solution of Ca(OH)₂ and 60±2 °C tap water (pH=12–13) and about 8% tensile strength decrease caused by freezing and thawing cycle (F/T), both on basis of those of the bars of the indoor beams only under sustained loading plus work cracks. The results demonstrate the effects of the tensile strengths under different environmental conditions of GFRP bars in concrete beams with work cracks subjected to sustained loads.

Keywords

GFRP bars / concrete beams / working cracks / sustained loading and severe environments / tensile strength

References

[1] Lwin M M The Important Roles of Bridge Maintenance and Managementon Transportation Safety and Efficiency[C]. 3rd International Conference on Bridge Maintenance, Safety and Management, Taylor and Francis, Netherlands, 2006

[2] American Concrete Inst. Guide for the Design and Construction of Concrete Reinforced with FRP Bars[S]. ACI 440.1R-06, 2006

[3] Japan Society of Civil Engineering. Recommendation for Design and Construction of Concrete Structures Using Continuous Fiber Reinforcing Materials[S], 1997

[4] Byars E A, Waldron P, Dejke V Durability of FRP in Concrete — Current Specifications and a New Approach[J]. International Journal of Materials and Product Technology, 2003, 19(1): 40-52.

[5] Nkurunziza G, Debaiky A, Cousin P, . Durability of GFRP Bars: A Critical Review of the Literature[J]. Progress in Structural Engineering and Materials, 2005, 7(4): 194-209.

[6] Dejke V Durability of FRP Reinforcement in Concrete[D], 2001 Sweden Chalmers University of Technology, Sweden

[7] Katsuki F, Uomoto T Prediction of Deterioration of FRP Rods due to Alkali Attack[C]. Proceedings of the Second International RILEM Symposium (FRPRCS-2), Non-Metallic (FRP) Reinforcement for Concrete Structures, London, 1995

[8] Tannous F E, Saadatmanesh H Environmental Effects on the Mechanical Properties of E-glass FRP Rebars[J]. ACI Materials Journal, 1998, 95(2): 87-100.

[9] Mukherjee A, Arwikar S J Performance of Glass Fiber-reinforced Polymer Reinforcing Bars in Tropical Environments — Part I: Structural Scale Tests[J]. ACI Structural Journal, 2005, 102(5): 745-753.

[10] Benmokrane B, Wang P, Ton-That T M Durability of Glass Fiber-reinforced Polymer Reinforcing Bars in Concrete Environment[J]. Journal of Composites for Construction, 2002, 6(3): 143-153.

[11] Dejke V Durability and Service Life Prediction of GFRP for Concrete Reinforcement[C]. Fibre-reinforced Plastics for Reinforced Concrete Structures, FRPRCS-5, Thomas Telford, 2001

[12] huili Z, Kanlinag T Properties and Mechanism on Flexural Fatigue of Polypropylene Fiber Reinforced Concrete Containing Slag[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2011, 26(3): 533-540.

[13] Katz A, Bank L C, Puterman M Durability of FRP Rebars after Four Years of Exposure[C]. Fibre-reinforced Plastics for Reinforced Concrete Structures, FRPRCS-5, 2001

[14] Chen Y, Davalos J F, Ray I Critical Short-Term Data on Durability of FRP Reinforcing Bars for Long-Term Prediction Models[M], 2005 New York DEStech Publications

[15] Chen Y, Davalos J F, Ray I Durability Prediction for GFRP Reinforcing Bars Using Short-term Data of Accelerated Aging Tests[J]. Journal of Composites for Construction, 2006, 10(4): 279-286.

[16] Chen Y, Davalos J F, Ray I Accelerated Aging Tests for Evaluations of Durability Performance of FRP Reinforcing Bars for Concrete Structures[J]. Composite Structures, 2007, 78(1): 101-111.

[17] Chen Y, Davalos J F, Ray I Life-cycle Durability Prediction Models for GFRP Bars in Concrete under Sustained Loading and Environmental Exposure[C]. International Symposium on Fibrereinforced Polymer Reinforcement for Concrete Structures, FRPRCS-8, Greece, 2007

[18] Robert M, Cousin P, Benmokrane B Durability of GFRP Reinforcing Bars Embedded in Moist Concrete[J]. Journal of Composites for Construction, 2011, 13(2): 66-73.

[19] Almusallam T H, Al-Salloum Y A Durability of GFRP Rebars in Concrete Beams under Sustained Loads at Severe Environments[J]. Journal of Composite Materials, 2006, 40(7): 623-637.