Fabrication and thermal insulating properties of ATO/PVB nanocomposites for energy saving glass

Gangshen Zhang , Wei Yan , Tao Jiang

Journal of Wuhan University of Technology Materials Science Edition ›› 2013, Vol. 28 ›› Issue (5) : 912 -915.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2013, Vol. 28 ›› Issue (5) : 912 -915. DOI: 10.1007/s11595-013-0792-4
Advanced Material

Fabrication and thermal insulating properties of ATO/PVB nanocomposites for energy saving glass

Author information +
History +
PDF

Abstract

The pechini method was used to synthesize antimony-doped tin oxide (ATO) nanoparticles, and the subsequent solution co-blend was employed to fabricate ATO/PVB nanocomposites. Uv-Vis-NIR spectra show that the addition of ATO nano particles can significantly enhance the thermal insulating efficiency of ATO/PVB nanocomposites. With the increase of ATO content, the thermal insulating efficiency is increased. Uv is almost fully absorbed by all ATO/PVB nanocomposites. Vis transmittance-haze spectra reveal that ATO/PVB nanocomposites exhibit higher Vis transmittance of over 72.7% and lower haze of below 2% when ATO content is in the range of 0.1 wt%–0.5 wt%. The thermal insulating tests indicate that in comparison with the pure PVB film, nanocomposite films with 0.1 wt%–0.5 wt% ATO can reduce temperature of 1–3 °C, suggesting that this novel nanocomposite can be used for energy-saving glass.

Keywords

polymer / nano composites / physical properties / thermal insulating

Cite this article

Download citation ▾
Gangshen Zhang, Wei Yan, Tao Jiang. Fabrication and thermal insulating properties of ATO/PVB nanocomposites for energy saving glass. Journal of Wuhan University of Technology Materials Science Edition, 2013, 28(5): 912-915 DOI:10.1007/s11595-013-0792-4

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Koji N, Takashi O, Nobuo O Properties of Poly (vinyl butyral) / TiO2 Nanocomposites Formed by Sol-gel Process [J]. Compos. Part B-Eng., 2004, 35: 2 19-22.

[2]

Feng L, Cheng C, Yao BD, . Photoluminescence Study of Single ZnO Nanostructures: Size Effect[J]. Appl. Phys. Lett., 2009, 95: 053-057.

[3]

Chao LC, Yang SH Growth and Auger Electron Spectroscopy Characterization of Donut-shaped ZnO Nanostructures[J]. Appl. Surf. Sci., 2007, 253: 7 162-7 165.

[4]

Shokr E K, Wakkad M M, El-Ghanny H A A, . Sb-doping Effects on Optical and Electrical Parameters of SnO2 Films[J]. J. Phys. Chem. Solids, 2000, 61: 75-85.

[5]

Elangovan E, Ramamurthi K Studies on Optical Properties of Polyerystalline SnO2: Sb Thin Films Prepared Using SnCl2 Precursor[J]. Cryst. Res. Technol., 2003, 38: 779-784.

[6]

Alma MJ, Cameron DC Characterization of Transparent Conductive ITO Thin Films Deposited on Titanium Dioxide Film by a Sol-gel Process[J]. Surf. Coat. Technol., 2001, 142–144: 776-780.

[7]

He QX, Tu WP, Hu JQ Synthesis and Characterization of Bismuthdoped Tin Dioxide Nanometer Powders[J]. J. Cent. South Univ. Technol., 2006, 13: 519-524.

[8]

Cai L High Quality Al-doped ZnO Thin Films by Chemical Coprecipitation[J]. Phys. Status Solidi A, 2009, 206: 1 461-1 464.

[9]

Rockemberger J, Felde U, Tischer M Near Edge X-ray Absorption Fine Structure Measurements (XANES) and Extended X-ray Absorption Fine Structure Measurements(EXAFS) of the Valence State and Coordination of Antimony in Doped Nanocrystallline SnO2[J]. J. Appl. Phys., 2000, 112: 4 296-4 304.

[10]

Terrier C, Chatelon J P, Roger J A Electrical and Optical Properties of Sb: SnO2 Thin Films Obtained by the Sol-gel Method[J]. Thin Solid Films, 1997, 295: 95-100.

[11]

Jayakumar OD, Sudarsan V, Kulshreshtha SK Metallic Nature of Snl−xSbxO2±δ(x=0.0, 0.10 and 0.20) Mixed Oxides: Probed by 119Sn MAS NMR[J]. Physica B, 2007, 392: 67-71.

[12]

Zhang J R, Gao L Synthesis and Characterization of Antimony-doped Tin Oxide (ATO) Nanoparticles by a New Hydrothermal Method[J]. Mater. Chem. Phys., 2004, 87: l0-13.

[13]

Terrier C, Chatelon J P, Roger J A Analysis of Antimony Doping in Tin Oxide Thin Films Obtained by the Sol-gel Method[J]. J. Sol-gel Sci. Technol., 1997, 10: 75-81.

[14]

Orel B, Lavrenčič-Štankgar U, Crnjak-Orel Z, . Structural and FTIR Spectroscopic Studies of Gel-xerogel-oxide Transitions of SnO2 and SnO2: Sb Powders and Dip-coated Films Prepared Via Inorganic Sol-gel Route[J]. J. Non-Cryst. Solids, 1994, 167: 272-288.

[15]

Mauro E, Marco A, Luciana M, . Sol-Gel Processing and Characterization of Pure and Metal-doped SnO2 Thin Films[J]. J. Am. Ceram. Soc., 2001, 84: 48-54.

[16]

Seo M, Akutsu Y, Kagemoto H Preparation and Properties of Sbdoped SnO2/metal Substrates by Sol-gel and Dip Coating[J]. Ceram. Int., 2007, 33: 625-629.

[17]

Elangovan E, Ramamurthi K A Study on Low Cost-high Conducting Fluorine and Antimony-doped Tin Oxide Thin Films[J]. Appl. Surf. Sci., 2005, 249: 183-196.

[18]

Lee S, Park B Structural, Electrical and Optical Characteristics of SnO2: Sb Thin Films by Ultrasonic Spray Pyrolysis[J]. Thin Solid Films, 2006, 510: 154-158.

[19]

Bernardi MIB, Cava S, Santos COP, . Comparison of Blue Pigments Prepared by Two Different Methods[J]. J. Eur. Ceram. Soc., 2002, 22: 2 911-2 915.

[20]

Pechini M P Method of Preparing Lead and Alkaline Earth Titanates and Niobates and Coating Method Using the Same to Form a Capacitor[P], 1967

[21]

Posthumus W, Magusin PC, Brokken-Zijp JC, . Surface Modification of Oxide Nanoparticles Using 3-methacryloxypropyltrim Ethoxysilane[J]. J. Colloid Interface Sci., 2004, 269: 109-116.

[22]

Standards Press of China. Safety Glazing Materials for Road Vehicles[S], 2003

AI Summary AI Mindmap
PDF

122

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/