Effect of different doses of electron beam irradiation on the structure of PAN precursor fibers and resultant stabilized fibers

Abstract

Different doses of electron beam was imposed on the polyacrylonitrile(PAN) precursor fibers before the fibers were stabilized. The effect of electron beam irradiation on the chemical structure, crystallite size of PAN precursor fibers and density, oxygen content, transverse section morphology of the stabilized fibers in the stabilization process were characterized by the use of fourier transform infrared spectroscopy(FTIR), float-sink procedure, elemental analysis and scanning electron microscope(SEM), respectively. The results showed that the extent of cyclization was increased and the crystallite size was decreased. We found that electron beam irradiation could accelerate the cyclization reaction and stabilization reaction in the stabilization process through density test and elemental analysis. We also found that the effect of 200 kGy electron beam irradiated fibers with the stabilization time of 75 min was better than that of the original stabilized fibers with 90 min. These results demonstrate that electron beam irradiation can shorten the stabilization time.

Keywords

electron beam irradiation / extent of cyclization / stabilization / oxygen

References

[1] Yu M, Wang C, Bai Y, . SEM and OM Study on the Microstructure of Oxidative Stabilized Polyacrylonitrile Fibers[J]. Polymer Bulletin, 2007, 58: 933-940.

[2] Sung M G, Yusuke K Strengthening of Carbon Fibers by a Magnetic Field Imposed in the Stabilization and Carbonization Process[J]. Materials Science and Engineering A, 2008, 488(1–2): 247-251.

[3] Zhang W X, Liu J, Wu G Evolution of Structure and Properties of PAN Precursors during Their Conversion to Carbon Fibers[J]. Carbon, 2003, 41: 2 805-2 812.

[4] Fitzer E, Frohs W, Heine M Optimization of Stabilization and Carbonization Treatment of PAN Fibers and Structural Characterization of the Resulting Carbon Fibers[J]. Carbon, 1986, 24(4): 387-395.

[5] Amit K N, Robert A W, Sarah P, . UV Assisted Stabilization Routes for Carbon Fiber Precursors Produced from Melt-processible Polyacrylonitrile Terpolymer[J]. Carbon, 2005, 43(5): 1 065-1 072.

[6] Aggour Y A, Aziz M S Degradation of Polyacrylonitrile by Low Energy Ion Beam and UV Radiation[J]. Polymer Testing, 2000, 19: 261-267.

[7] Dos C, Santos L G, Kawano Y Degradation of Polyacrylonitrile by X-ray Radiation[J]. Polymer Degradation and Stabilization, 1994, 44(1): 27-32.

[8] Badawy S M, Dessouki A M Cross-linked Polyacrylonitrile Prepared by Radiation-induced Polymerization Technique[J]. Journal of Physical Chemistry B, 2003, 107(41): 11 273-11 279.

[9] Hill DJT, Lang A P, O_Donnell J H, . The Effect of γ-radiation on Polyacrylonitrile[J]. Polymer Degradation and Stabilization, 1992, 38(3): 193-203.

[10] Yuan H, Wang Y, Yu H, . Effect of UV Irradiation on PAN Precursor Fibers and Stabilizaiton Process[J]. Journal of Wuhan University of Technology-Materials Science Edition, 2011, 27(3): 449-454.

[11] Dietrich J, Hirt P, Herlinger H Electron-beam-induced Cyclisation to Obtain C-fiber Precursors from Polyacrylonitrile Homopolymers[J]. European Polymer Journal, 1996, 32(5): 617-623.

[12] Miao P, Wu D, Zeng K, . Influence of Electron Beam Pre-irradiation on the Thermal Behaviors of Polyacrylonitrile[J]. Polymer Degradation and Stability, 2010, 95: 1 665-1 671.

[13] Zhang W, Liu Jie Effect of Post-spinning Modification on the PAN Precursors and Resulting Carbon Fibers[J]. Journal of Wuhan University of Technology-Materials Science Edition, 2006, 21(3): 45-48.

[14] Meijie Y, Yujun B, Chengguo W, . A New Method for the Evaluation of Stabilization Index of Polyacrylonitrile Fibers[J]. Materials Letters, 2007, 61(11–12): 2 292-2 294.

[15] Xu L, Zhang W, Tong Y, . Study on PAN Precursor Fibers Process Crystallization Behavior[J]. New Carbon Materials, 1997, 12(3): 31-33.

[16] Bajaj P, Sreekumar T V, Kushal S, . Structural Investigations of Acrylonitrile-vinyl Acid Copolymers by NMR Spectroscopy[J]. Journal of Applied Polymer Science, 2003, 88(5): 1 211-1 216.

[17] Watt W, Johnson W Mechanism of Oxidisation of Polyacrylonitrile Fibres[J]. Nature, 1975, 257(18): 210-212.

[18] Yu M, Wang C, Bai Y, . Combined Effect of Processing Parameters on Thermal Stablization of PAN Fibers[J]. Polymer Bulletin, 2006, 57: 525-533.

[19] Yonggen L, Dong W, Qingfang Z, . Skin-core Structure in Mesophase Pitch Based Fiber: Causes and Prevention[J]. Carbon, 1998, 36(12): 1 719-1 724.