Effect of pressure on the solidification behavior and mechanical properties of SiCp/Al-Mg composites

Abstract

SiCp/Al-Mg metal matrix composites were manufactured by semi-solid stirring technique. The composites were remelted and then solidified under different pressures to study the solidification behavior of composites by differential thermal analysis, scanning electron microscopy, and transmission electron microscopy. The experimental results show that SiCp reinforcements can not act as heterogeneous nucleation sites for α(Al), and an interfacial layer composed of MgAl₂O₄ spinel and Si-rich phase existed at Al/SiCp interface. The undercooling of the matrix alloy was improved by the pressure applied, resulting in the grain of matrix alloy refining. The X-ray diffraction pattern of composites testified that the matrix alloy exhibited a certain preferred orientation during solidification. In addition, with increasing the pressure for solidification, the pored defects in the composites decreased, while the relative density, hardness and compressive strength increased. Therefore, the microstructure and mechanical properties of the composites were improved by pressure placed during the solidification of SiCp/Al-Mg composites.

Keywords

MMCs / nucleation / solidification behavior / microstructure / mechanical properties

References

[1] Kaczmar JW, Pietrzak K, Wlosinski W The Production and Application of Metal Matrix Composite Materials [J]. Journal of Materials Processing Technology, 2000, 106: 58-67.

[2] Tjong SC, Ma ZY Microstructural and Mechanical Characteristics of in-situ Metal Matrix Composites[J]. Materials Science and Engineering R, 2000, 29: 49-113.

[3] Hashim J, Looney L, Hashmi MSJ Metal Matrix Composites: Production by the Stir Casting Method[J]. Journal of Materials Processing Technology, 1999, 92–93: 1-7.

[4] Zhou W, ZM Xu Casting of SiC Reinforced Metal Matrix Composites[ J]. Journal of Materials Processing Technology, 1997, 63: 358-363.

[5] Eardley ES Infiltration and Solidification of Commercial Purity Aluminium Matrix Composites[J]. Materials Science and Engineering A, 2003, 1–2(359): 303-312.

[6] Su HJ, Zhang J, Yu JZ, Liu L, Fu HZ Rapid Solidification and Fracture Behavior of Ternary Metastable Eutectic Al₂O₃/YAG/YSZ in situ composite ceramic[J]. Materials Science and Engineering A, 2011, 528: 1 967-1 973.

[7] Skolianos SM, Mavropoulos AA Solidification Microstructureand Heterogeneous Nucleation Phenomena in Cast SiCp-reinforced Hypereutectic Al-Si Alloy Composites[J]. Scandinavian Journal of Metallurgy, 2005, 34: 16-21.

[8] Wang Y, Wang HY, Yang YF, Jiang QC Solidification Behavior of Cast TiB2 Particulate Reinforced Mg Composites[J]. Materials Science and Engineering A, 2008, 478: 9-15.

[9] Wang W, Ajersch F, Löfvander JPA Si Phase Nucleation on SiC Particulate Reinforcement in Hypereutectic Al-Si Alloy[J]. Materials Science and Engineering, 1994, 1(187): 65-75.

[10] Kim JK, Rohatgi PK Nucleation on Ceramic Particles in Cast Metal-matrix Composites[J]. Metallurgical and Materials Transactions A, 2000, 31: 1 295-1 304.

[11] Rajan TPD, Prabhu KN, Pillai RM Solidification and Casting Mould Interfacial Heat Transfer Characteristics of Aluminum Matrix Composites[J]. Composites Science and Technology, 2007, 67: 70-78.

[12] Miyahara H, Ogi K Dendrite Growth of Aluminum-copper Alloy Reinforced with Contineous Aluminna Fibers[J]. Materials Transactions, 2001, 42(2): 252-257.

[13] Gowri S, Samuel FH Effect of Cooling Rate on the Solidification Behavior of Al-7 pct Si-SiC Metal-matrix Composites[J]. Metallurgical and Materials Transactions A, 1992, 12(23): 3 369-3 376.

[14] Ramesh CS, Jagadeesh SK, Keshavamurthy R Solidification Studies on Sand Cast Al 6061-SiCp Composites[J]. Journal of Alloys and Compounds, 2011, 5095: 5 371-5 374.

[15] Hashim J, Looney L, Hashmi MSJ Particle Distribution in Cast Metal Matrix Composites-part I[J]. Journal of Materials Processing Technology, 2002, 123: 251-257.

[16] Geng L, Wei HM, Zhang XX Effect of Cooling Rate on the Solidification Behavior and Microstructure of SiCw/Al-18Si Composites[J]. Journal of Wuhan University of Technology, 2009, 24: 1-4.

[17] Seo YH, Kang CG The Effect of Applied Pressure on Particle-dispersion Characteristics and Mechanical Properties in Melt-stirring Squeeze-cast SiCp/A1 Composites[J]. Journal of Materials Processing Technology, 1995, 55: 370-379.

[18] Hu HQ The Fundamental Theory of Metal Solidification[M], 2000 Beijing Mechanical Industry Press

[19] Zhang J, Qiu KQ, Wang AM, Zhang HF, Quan MX, Hu ZQ Effects of Pressure on the Solidification Microstructure of Mg65Cu25Y10 Alloy[J]. Journal of Materials Science and Technology, 2004, 20(1): 106-108.

[20] Laurent V, Chatain D, Eustathopoulos N Wettability of SiC by Aluminium and Al-Si Alloys[J]. Journal of Materials Science, 1987, 22: 244-250.

[21] Song JI, Yang YC, Han KS Squeeze-casting Conditions of Al₂O₃/Al Metal Matrix Composites with Variations of the Preform Drying Process[J]. Journal of Materials Science, 1996, 31(10): 2615-2621.

[22] Mitra R, Chalapathi RVS, Maiti R, Chakraborty M Stability and Response to Rolling of Theinterfaces in Cast Al-SiCp and Al-Mg Alloy-SiCp Composites[J]. Materials Science and Engineering A, 2004, 379: 391-400.

[23] Wu SS, Nakae H Nucleation Effect of Alumina in Al-Si/Al₂O₃ Composites[J]. Journal of Materials Science Letters, 1999, 18(4): 321-323.