Thermal stability, thermal decomposition and mechanism analysis of cycloaliphatic epoxy/4,4′-dihydroxydiphenylsulfone/aluminum complexes latent resin systems

Songquan Wu , Shaozhu Liu , Yuyan Liu , Qi Zhu , Huige Wei

Journal of Wuhan University of Technology Materials Science Edition ›› 2012, Vol. 27 ›› Issue (6) : 1061 -1067.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2012, Vol. 27 ›› Issue (6) : 1061 -1067. DOI: 10.1007/s11595-012-0601-5
Article

Thermal stability, thermal decomposition and mechanism analysis of cycloaliphatic epoxy/4,4′-dihydroxydiphenylsulfone/aluminum complexes latent resin systems

Author information +
History +
PDF

Abstract

The thermal stability of latent resin systems, cycloaliphatic epoxy/4,4′-dihydroxydiphenylsulfone/aluminum complexes, was investigated by dynamic differential scanning calorimetry (DSC) analysis. Experiments were conducted under non-isothermal condition in a nitrogen atmosphere at the heating rate of 10, 20, 30 and 40 °C/min, respectively. TG curves showed that, in the temperature range of 25 to 600 °C, the stability of the resin systems could be enhanced by increasing the length of the aliphatic chain in the initiator. Both the Kissinger method and the Ozawa-Flynn-Wall method were employed to calculate activation energies of the decomposition reaction, and the values obtained from the two methods were compared. Moreover, the corresponding reaction mechanism was identified by the Achar differential method and the Coats-Redfern integral method. The experimental results showed that these four methods were reliable and effective to study the kinetics of the thermal decomposition reaction; and the most probable thermal decomposition mechanism of the resin systems we proposed was found to comply with Mampel power law (m=1).

Keywords

epoxy resin / aluminum complex / phase separation / thermal decomposition

Cite this article

Download citation ▾
Songquan Wu, Shaozhu Liu, Yuyan Liu, Qi Zhu, Huige Wei. Thermal stability, thermal decomposition and mechanism analysis of cycloaliphatic epoxy/4,4′-dihydroxydiphenylsulfone/aluminum complexes latent resin systems. Journal of Wuhan University of Technology Materials Science Edition, 2012, 27(6): 1061-1067 DOI:10.1007/s11595-012-0601-5

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Baller J., Becker N., Ziehmer M., . Interactions between Silica Nanoparticles and an Epoxy Resin before and during Network Formation[J]. Polymer, 2009, 50(14): 3 211-3 219.

[2]

Yang J.P., Chen Z.K., Fu S.Y., . Simultaneous Improvements in the Cryogenic Tensile Strength, Ductility and Impact Strength of Epoxy Resins by a Hyperbranched Polymer[J]. Polymer, 2008, 49(13–14): 3 168-3 175.

[3]

Wang X., Hu Y., Song L. Flame Retardancy and Thermal Degradation Mechanism of Epoxy Resin Composites Based on a DOPO Substituted Organophosphorus Oligomer[J]. Polymer, 2010, 51(11): 2 435-2 445.

[4]

Murai S., Fujieda S., Hayase S. A Novel Latent Initiator for Cationic Polymerization of Epoxide: Composite Catalysts Containing Aluminum Complexes Phase-Seperated in Epoxides[J]. Journal of Applied Polymer Science, 2002, 83(5): 1 046-1 053.

[5]

Murai S., Nakano Y., Hayase S. Novel Latent Initiator for Cationic Polymerization of Epoxides[J]. Journal of Applied Polymer Science, 2001, 80(2): 181-187.

[6]

Barral L., Díez F.J., García-Garabal S. Thermodegradation Kinetics of a Hybrid Inorganic-Organic Epoxy System[J]. European Polymer Journal, 2005, 41(7): 1 662-1 666.

[7]

Ren H., Sun J.Z., Zhao Q., . Synthesis and Characterization of a Novel Heat Resistant Epoxy Resin Based on N,N′-bis(5-hydroxy-1-naphthyl)Pyromellitic Diimide[J]. Polymer, 2008, 49(24): 5 249-5 253.

[8]

Budrugeac P., Segal E. Application of Isoconversional and Multivariate Non-linear Regression Methods for Evaluation of the Degradation Mechanism and Kinetic Parameters of an Epoxy Resin[J]. Polymer Degradation and Stability, 2008, 93(6): 1 073-1 080.

[9]

Liu W.B., Qiu Q.H., Wang J. Curing Kinetics and Properties of Epoxy Resin-Fluorenyl Diamine Systems[J]. Polymer, 2008, 49(19): 4 399-4 405.

[10]

Sun J.T., Huang Y.D., Gong G.F., . Thermal Degradation Kinetics of Poly(methylphenylsiloxane) Containing Methacryloyl Groups[J]. Polymer Degradation and Stability, 2006, 91(2): 339-346.

[11]

Vincent L., Mija A., Sbirrazzuoli N. Liquid Crystalline and Isotropic Epoxy Thermosets: Mechanism and Kinetics of Non-isothermal Degradation[J]. Polymer Degradation and Stability, 2007, 92(11): 2 051-2 057.

[12]

Brown M.E., Maciejewski M., Vyazovkin S. Computational Aspects of Kinetics Analysis[J]. Thermochim Acta, 2000, 355: 125-143.

[13]

Kissinger H.E. Reaction Kinetics in Differential Thermal Analysis[J]. Analytical Chemistry, 1957, 29(11): 1 702-1 706.

[14]

Salla J.M., Ramis X. Comparative Study of the Cure Kinetics of an Unsaturated Polyester Resin Using Different Procedures[J]. Polymer Engineering and Science, 1996, 36(6): 835-851.

[15]

Liang H.B., Ding J., Shi W.F. Kinetics and Mechanism of Thermal Oxidative Degradation of UV Cured Epoxy Acrylate/Phosphate Triacrylate Blends[J]. Polymer Degradation and Stability, 2004, 86(2): 217-223.

[16]

Ozawa T. A New Method of Analyzing Thermogravimetric Data[J]. Bulletin of the Chemical Society of Japan, 1965, 38: 1 881-1 886.

[17]

Flynn J.H., Wall L.A., Quick A. Direct Method for the Determination of Activation Energy from Thermogravimetric Data[J]. Journal of Polymer Science Part B: Polymer Letters, 1966, 4: 323-328.

[18]

Chunxiu G., Yufang S., Donghua C. Comparative Method to Evaluate Reliable Kinetic Triplets of Thermal Decomposition Reactions[J]. Journal of Thermal Analysis and Calorimetry, 2004, 76: 203-216.

[19]

Coats A.W., Redfern J.P. Kinetic Parameters from the Thermogravimetric Data[J]. Nature, 1964, 201: 68-69.

[20]

Tomaszewicz E., Kotfica M. Mechanism and Kinetics of Thermal Decomposition of Nickel(II) Sulfate(VI) Hexahydrate[J]. Journal of Thermal Analysis and Calorimetry, 2004, 77(1): 25-31.

AI Summary AI Mindmap
PDF

121

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/