Microstructure and mechanical properties of submicron-grained NiAl-Al₂O₃ composite prepared by pulse current auxiliary sintering

Abstract

Dense and submicron-grained NiAl-Al₂O₃ composite was fabricated by pulse current auxiliary sintering (PCAS). Its microstructure was analyzed by XRD, SEM and TEM, and its mechanical behavior was evaluated through compression test and fracture toughness test. The average grain sizes of NiAl and Al₂O₃ are about 200 nm and 100 nm respectively. The Al₂O₃ particles dispersed in NiAl matrix, forming intergranular structure and intragranular structure. During sintering, Al₂O₃ particles were remarkably spherized due to the unique sintering mechanism of PCAS, which is beneficial to the improvement of toughness. The NiAl-Al₂O₃ composite exhibits high compressive yield strength, whether at room temperature or elevated temperature. Its room-temperature (23 °C) and elevated-temperature (1 200 °C) compressive yield strength are up to 2 050 MPa and 140 MPa, respectively. Meanwhile, its fracture toughness is significantly enhanced, which is up to 8.2 MPa/m^1/2. It is suggested that the main strengthening-toughening mechanisms are grain refinement strengthening and Al₂O₃ dispersion strengthening. The fracture of larger NiAl grain is the transgranular cleavage and this is induced by crack tip deflection and grain boundary weakening which are caused by intergranular and intragranular Al₂O₃ particles, respectively.

Keywords

NiAl / Al₂O₃ composite / pulse current auxiliary sintering / microstructure / mechanical behavior

References

[1] Choo H., Nash P., Dollar M. Mechanical Properties of NiAl-AlNAl₂O₃ Composites[J]. Materials Science and Engineering A, 1997, 239–240(7): 464-471.

[2] Albiter A., Salazar M., Bedolla E., . Improvement of the Mechanical Properties in a Nanocrystalline NiAl intermetallic Alloy with Fe, Ga and Mo Additions[J]. Materials Science and Engineering A, 2003, 347(1–2): 154-164.

[3] Murty B.S., Joardar J., Pabi S. K. Influence of Fe and Cr on the Disordering Behavior of Mechanically Alloyed NiAl[J]. Nanostructured Materials, 1996, 7(6): 691-697.

[4] Witkin D.B., Lavernia E.J. Synthesis and Mechanical Behavior of Nanostructured Materials via Cryomilling[J]. Progress in Materials Science, 2006, 51(1): 1-60.

[5] Cammarota G.P., Casagrande A. Effect of Ternary additions of Iron on Microstructure and Microhardness of the Intermetallic NiAl in Reactive Sintering[J]. Journal of Alloys and Compounds, 2004, 381(1–2): 208-214.

[6] Albiter A., Espinosa-Medina M.A., Gonzalez-Rodriguez J.G., . Effect of Mo, Ga and Fe on the Corrosion Resistance of Nanocrystalline NiAl Alloy in Acidic Media[J]. International Journal of Hydrogen Energy, 2005, 30(12): 1 311-1 315.

[7] Guo J.T., Sheng L.Y., Tian Y.X., . Effect of Ho on the Microstructure and Compressive Properties of NiAl-based Eutectic Alloy[J]. Materials Letters, 2008, 62(23): 3 910-3 912.

[8] Dollar M., Dymek S., Hwang S., . The Role of Microstructure on Strength and Ductility of Hot-extruded Mechanically Alloyed NiAl[J]. Metallurgical and Materials Transactions A, 1993, 24(9): 1 993-2 000.

[9] Ur S., Nash P. Secondary Recrystallization and High Temperature Compressive Properties of ODS MA NiAl[J]. Scripta Materialia, 2002, 47(6): 405-409.

[10] Zhu H.X., Abbaschian R. In-situ Processing of NiAl-alumina Composites by Thermite Reaction[J]. Materials Science and Engineering A, 2000, 282(1–2): 1-7.

[11] Licheri R., Fadda S., Orrù R., . Self-propagating High-temperature Synthesis of Barium Titanate and Subsequent Densification by Spark Plasma Sintering (SPS)[J]. Journal of the European Ceramic Society, 2007, 27(5): 2 245-2 253.

[12] Zhang C.P., Zhang K.F. Tensile Behaviors of Fine-grained γ-TiAl Based Alloys Synthesized by Pulse Current Auxiliary Sintering[J]. Materials Science and Engineering: A, 2009, 520(1–2): 101-104.

[13] Omori M. Sintering, Consolidation, Reaction and Crystal Growth by the Spark Plasma System (SPS)[J]. Materials Science and Engineering A, 2000, 287(2): 183-188.

[14] Tokita M. Development of Large-size Ceramic/Metal Bulk FGM Fabricated by Spark Plasma Sintering[J]. Materials Science Forum, 1999, 308–311: 83-88.

[15] Tokita M. Trends in Advanced SPS Spark Plasma Sintering System and Technology[J]. Journal of the Society of Powder Technlogy, 1993, 11(30): 709-804.

[16] Kim H., Kawahara M., Tokita M. Specimen Temperature and Sinterability of Ni Powder by Spark Plasma Sintering[J]. Powder Metallurgy, 2000, 47: 887-891.

[17] Guo J.T., Zhou L.Z., Li G.S. Mechanically Synthesis and Mechanical Properities of Nanocrystalline Intermetallics NiAl[J]. Acta Materialia Sinca, 1999, 35(8): 846-850.

[18] Zhou L.Z., Guo J.T., Li G.S., . Investigation of Annealing Behavior of Nanocrystalline NiAl[J]. Materials and Design, 1997, 18(4–6): 373-377.

[19] Hall E.O. The Deformation and Aging of Mild Steel: Discussion of Results[J]. Processings of the Physical Society: Section B, 1951, 64(9): 747-753.

[20] Petch N.J. The Cleavage Strength of Polycrystals[J]. J. Iron Steel Inst., 1953, 174(2): 25-28.

[21] Orowan E. Discussion in “Symposium on Internal Stresses”[J]. Institute of Metals, 1947: 451

[22] Guo J.T. Ordered Intermetallic Compound NiAl Alloy[M], 2003 Beijing Science Press 426

[23] Xing ZP, Yu LG. Study on the Room Toughening Mechanism in the NiAl-TiC in situ Composite[J]. Journal of Materials Engineering, 1997, (5): 20–22

[24] Peng L.M. Fabrication and Mechanical Properties of Microalloyed and Ceramic Particulate Reinforced NiAl-based Alloys[J]. Journal of Alloys and Compounds, 2007, 440(1–2): 150-153.