Influence of nucleating agent on the formation of C4A3S

Huiling Guo , Junlin Xie , Shu Zhang , Qi Xu

Journal of Wuhan University of Technology Materials Science Edition ›› 2012, Vol. 27 ›› Issue (1) : 177 -180.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2012, Vol. 27 ›› Issue (1) : 177 -180. DOI: 10.1007/s11595-012-0431-5
Article

Influence of nucleating agent on the formation of C4A3S

Author information +
History +
PDF

Abstract

The reference test methods are carried out parallelly, by means of chemical analysis, X-ray diffraction, differential scanning calorimetry-thermogravimetry, scanning electron microscopy and polarized optical microscope to study the formation of C4A3S in the presence and absence of nucleating agent. The results show that nucleating agent with high calcium and low heat consumption as tricalcium silicate (C3S) promotes the formation of C4A3S and increases desulfurization degree obviously. During calcining raw meals doped with C3S, the grain sizes of C4A3S are larger compared with that without C3S. And at the same calcining level, the mass loss and the heat consumption belonged to CaCO3 decomposition is reduced.

Keywords

desulfurization / C4A3S / nucleating agent / C3S

Cite this article

Download citation ▾
Huiling Guo, Junlin Xie, Shu Zhang, Qi Xu. Influence of nucleating agent on the formation of C4A3S. Journal of Wuhan University of Technology Materials Science Edition, 2012, 27(1): 177-180 DOI:10.1007/s11595-012-0431-5

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Sharp J. H., Lawrence C. D., Yang R. Calcium Sulfoaluminate Cements, Low Energy Cements, Special Cements or What? [J]. Cem. Concr. Res., 1999, 11(1): 3-13.

[2]

Knofel D., Wang J. F. Properties of Three Newly Developed Quick Cements [J]. Cem. Concr. Res., 1994, 24(5): 801-812.

[3]

Arjunan P., Silsbee M. R., Roy D. M. Sulfoaluminate-belite Cement from Low-calcium Fly Ash and Sulfur-rich and Other Industrial Byproducts[J]. Cem. Concr. Res., 1999, 29: 1 305-1 311.

[4]

Ragozina T. A. Reaction of Calcium Sulphate with Aluminate at 1 200 °C[J]. Zh. Prikl. Khim, 1957, 30: 1 682-1 684.

[5]

G Moir, F P Glasser. Mineralisers Modifiers and Activators in the Clinkering Process[C]. 9 th ICCC New Delhi, India, 1992:125–152

[6]

Saraswat I. P., Mathur V. K., Ahluwalia S. C. Thermal Decomposition and Phase Transformation Studies of CaCO3 — SiO2 (2:1) System in Presence of Sodium and Potassium Carbonate, in: Finep (Ed.) [C]. 8th ICCC Rio de Janeiro. Brazil, 1986, 2: 162-166.

[7]

Benarchid M. Y., Rogez J. The Effect of Cr2O3 and P2O5 Additions on the Phase Transformations during the Formation of Calcium Sulfoaluminate[J]. Cement and Concrete Research, 2005, 35: 2 074-2 080.

[8]

Wang Y. M., Su M. Z., Den J. A., . A Study of the Mineral Composition of Cement in the Quinary System CaO-SiO2-Al2O3-Fe2O3-SO3 [J]. Journal of the Chinese Ceramic Society, 1982, 10(4): 369-376.

[9]

Zhou J. H., Yang T. H., Chen J., . Study of High Temperature Phase of Sulphoaluminate for Desulfurization [J]. Journal of China Coal Society, 2003, 28(3): 285-289.

[10]

Mei L., Li J. H., Wang J. C. The Influence of Oxides and Compound Additives on the Stability of CaSO4 at High Temperature [J]. Acta Petrologica Et Mineralogica, 2005, 24(6): 587-590.

[11]

Zhong W. Z., Hua S. K. Morphology of Crystal Growth [M], 1999 Beijing Science Press

[12]

Zhang P. X., Zhang Y. Z. Early Strength and Low pH Value Sulphoaluminate Cement [J]. Cement Engineering, 2000, 1: 50-52.

AI Summary AI Mindmap
PDF

136

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/