Rheological behaviors and processing windows of low viscosity epoxy resin for VIMP

Abstract

The chemorheological behaviors of a low viscosity epoxy resin system (Huntsman 1564/3486) for vacuum infusion moulding process (VIMP) were studied with viscosity experiments. The dual-Arrhenius rheological model and the engineering viscosity model were established and compared with the experimental data. The result showed that the viscosity in the earlier stage calculated by dual-Arrhenius model were smaller than the experimental data, while the data calculated by the engineering model were larger. Combining the two models together can predict the rheological behaviors of the resin system in a more credible manner. The processing windows of the resin system for VIMP were determined based on the two models. The optimum processing temperature is 30–45 °C.

Keywords

vacuum infusion molding process(VIMP) / epoxy resin / rheological behaviors

References

[1] Dhiren M., Nuno C. Active Control of the Vacuum Infusion Process [J]. Composites: Part A, 2007, 38: 1 271-1 287.

[2] Brouwer W. D., Vanherpt E. C., Labordus M. Vacuum Injection Moulding for Large Structural Applications [J]. Composites: Part A, 2003, 34: 551-558.

[3] Han K., Jiang S. L., Zhang C., . Flow Modeling and Simulation of SCRIMP for Composites Manufacturing [J]. Composites: Part A, 2000, 31: 79-86.

[4] Roller M. B. Rheology of Curing Thermosets: A Review [J]. Polymer Engineering Science, 1986, 26: 432-440.

[5] Roller M.B. Characterization of the Time-temperatureviscosity Behavior of Curing B-staged Epoxy Resin [J]. Polymer Engineering and Science, 1975, 15: 406-416.

[6] Shanku R., Vaughan J. G., Roux J. A. Rheological Characteristics and Curing Kinetics of Epon8621W Epoxy Used in Pultrusion [J]. Advanced in Polymer Technology, 1997, 16: 297-311.

[7] Hsieh T. H., Wang T. L., Ho K. S., . Chemorheological Analysis of an Epoxynovolac Molding Compound [J]. Polymer Engineering and Science, 2000, 40: 418-429.

[8] Tajima A., Donald G. Chemorheology of an Amine-Cure Epoxy Resin [J]. Polymer Engineering and Science, 1986, 26: 427-431.

[9] Mijovic J., Lee C. H. A Comparison of Chemorheological Models for Thermoset Cure [J]. Journal of Applied Polymer Science, 1989, 38: 2 155-2 159.

[10] Perry M. J., Wang T. J., Ma Y., . Resin Transfer Moulding of Epoxy/graphite Composites [C]. Process 24th International SAMPE Technology Conference, 1992, 24: 421-426.

[11] Bidstrup S. A., Macosko C. W. Chemorheology Relations for Epoxy/amine Crosslinking [J]. Journal of Polymer Science: Part B: Polymer Physics, 1990, 28: 691-697.

[12] Shi F., Duan Y. X., Zeng X. N., . Engineering Viscosity Model for Bisphenol-A Epoxy Resin /Catalytic Curing Agent System [J]. Acta Materiale Composites Sinica, 2001, 18: 16-19.

[13] Kiunaa N., Lawrencea C. J., Fontanab Q. P., . A Model for Resin Viscosity During Cure in the Resin Transfer Moulding Process [J]. Composites: Part A, 2002, 33: 1 497-1 503.

[14] Shi F., Duan Y. X., Liang Z. Y., . Rheological Behavior of a Bismaleimide Resin System for RTM Process [J]. Acta Materiae Compositae Sinica, 2006, 23: 56-62.

[15] Yang J. S., Xiao J. Y., Jiang D. Z., . Rheological Model and Behaviors of Resin System for Vacuum Infusion Molding Process [J]. Acta Materiae Compositae Sinica, 2009, 26: 1-7.