Creep characteristics of crumb rubber modified asphalt binder

Lan Wang , Chunqing Chang , Yongming Xing

Journal of Wuhan University of Technology Materials Science Edition ›› 2011, Vol. 26 ›› Issue (1) : 118 -120.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2011, Vol. 26 ›› Issue (1) : 118 -120. DOI: 10.1007/s11595-011-0181-9
Article

Creep characteristics of crumb rubber modified asphalt binder

Author information +
History +
PDF

Abstract

Crumb rubber modified asphalt containing 20 percent crumb rubber particles of 30 mesh has been examined by Scanning Electron Microscope (SEM) to observe the microcosmic appearance and the characteristic distribution of crumb rubber particles in asphalt. The SEM pictures reveal that the crumb rubber particles distribute evenly in the asphalt and they are compatible well with asphalt. The shear creep test of crumb rubber modified asphalt was carried out at −10 °C and 40 °C by Dynamic Shear Rheology (DSR). The shearing deformation at different temperature and creep stiffness modulus curve at loading stage of crumb rubber modified asphalt have been measured. The stiffness modulus of crumb rubber modified asphalt is much temperature sensitive and it decays much quick at the early stage of loading than normal asphalt. The rate of decay of stiffness modulus is slow at the subsequent stage and stiffness modulus approaches to a stable value at the final stage at a higher temperature. In addition, Burgers model is suitable to describe and simulate experimental results of viscoelastic properties of the crumb rubber modified asphalt.

Keywords

crumb rubber modified asphalt / creep / stiffness modulus / rheology model / model parameter

Cite this article

Download citation ▾
Lan Wang, Chunqing Chang, Yongming Xing. Creep characteristics of crumb rubber modified asphalt binder. Journal of Wuhan University of Technology Materials Science Edition, 2011, 26(1): 118-120 DOI:10.1007/s11595-011-0181-9

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Champion L., Gerard Planche J. F., . Low Temperature Fracture Properties of Polymer-Modified Asphalts Relationships with the Morphology[J]. Journal of Materials Science, 2001, 36(3): 451-460.

[2]

Hou J. Viscoelastic Study of Fiber Modified Asphalt Concrete[D], 2007 Dalian Daliann Maritime University

[3]

Wang J. C., ASCE S. M., Zeng X. Influence of Temperature and Pressure on the Dynamic Properties of Rubber-Modified Asphalt Concrete[J]. Journal of Materials in Civil Engineering. ASCE, 2006, 125: 0899-1 561.

[4]

Navarro F. J., Martınez-Boza P. P., Valencia F., Gallegos C. Rheological Characteristics of Ground Tire Rubber-Modified Bitumens[J]. Chemical Engineering Journal, 2002, 89(2): 53-61.

[5]

Navarro F. J., Partal P., Martınez-Boza, . Thermo-Rheological Behaviour and Storage Stability of Ground Tire Rubber-Modified Bitumens[J]. Fuel, 2004, 83(3): 2 041-2 049.

[6]

Guo N., Zhao Y., Sun L. The Influence of Fiber Contents to Toughness of Asphalt Concrete[J]. Journal of Traffic and Transportation Engineering, 2006, 6(4): 32-35.

[7]

Palit S. K., Sudhakar Reddy K., Pandey B. B. Laboratory Evaluation of Crumb Rubber Modified Asphalt Mixes[J]. Journal of Materials in Civil Engineering. ASCE, 2004, 45: 0899-1 561.

[8]

Ye Q. Researh on the Rheological Characteristics of Fiber Modified Asphalt Binder and Mixture[D], 2007 Wuhan Wuhan University of Technology

[9]

Zhang Z., Zhang X., Hu G., . Microscopic Mechanism Analysis of Diatomite Modified Asphalt[J]. Journal of Beijing University of Technology, 2007, 33(9): 943-947.

AI Summary AI Mindmap
PDF

98

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/