Preparation, characterization and frictional properties of silane self-assembled elastomeric nanocomposite polymer layers

Abstract

A novel surface modification method was proposed to improve the tribological property of Si. Multilayers were grown on Si(100) substrate by self-assembling monolayer (SAMs) method and filtered catholic vacuum arc (FCVA) technique. The film composition and structure were characterized by using x-ray photoelectron spectroscope (XPS) and Raman spectroscopy (Raman). Surface morphology and the roughness were also analyzed by an atomic force microscope (AFM) and a scanning electron microscopy (SEM). The frictional behaviors of the films were evaluated by a UMT tester. Results showed that elastomeric nanocomposite monolayer prepared by SAM was uniformly distributed and isotropy, and the diamond-like carbon (DLC) film was successfully deposited by the FCVA technique. The friction coefficients of the prepared samples were in the range of 0.108–0.188. Furthermore, the friction coefficient slightly increased but the surface quality of the wear trace was improved after adding the copolymer elastomeric macromolecules SEBS on aminopropyl-triethoxysilane (APS) layer due to the inherent long chain of SEBS which abated the immediate impulsion at the interface and changed the kinetic energy into elastic potential energy, and stored it in SEBS.

Keywords

nanocomposite polymer layers / DLC / tribological property / energy dissipation / sandwich-structure

References

[1] Ding J. N., Xie G. X., Fan Z., . Microstructure and Mechanical Properties of Heat-treated GeSb₂Te₄ Thin Films[J]. Journal of Wuhan University of Technology-Materials Science Edition, 2007, 22(2): 196-200.

[2] Xu B. S., Ou Z. W., Ma S. N., . Nano-surface Engineering[J]. China Mechanical Engineering, 2000, 11(6): 707-712.

[3] Huang K. J., Lin X., Xie C. S., . Microstructure and Wear Behaviour of Laser-Induced Thermite Reaction Al₂O₃ Ceramic Coatings on Pure Aluminum and AA7075 Aluminum Alloy[J]. Journal of Wuhan University of Technology-Materials Science Edition, 2008, 23(1): 89-94.

[4] Wu G., Zhang W. G., Wang C. T. Tribological Properties of PVA-H Composites Reinforced by Nano-HA Particles[J]. Journal of Wuhan University of Technology-Materials Science Edition, 2007, 22(3): 490-493.

[5] Prakash S., Karacor M. B., Banerjee S. Surface Modification in Microsystems and Nanosystems[J]. Surface Science Reports, 2009, 64(7): 233-254.

[6] Szymonski M., Kolodziej J., Such B., . Nano-scale Modification of Ionic Surfaces Induced by Electronic Transitions[J]. Progress in Surface Science, 2001, 67(1–8): 123-138.

[7] Cheng G. G., Ding J. N., Xie G. X., . Mechanical and Electrical Properties of the Phosphor-doped Nano-silicon Film under External Electric Field[J]. Surface and Interface Analysis, 2009, 41(05): 384-388.

[8] Bhushan B., Israelachvili J. N., Landman U. N. Wear and Lubrication at the Atomic Scale[J]. Nature, 1995, 374: 607-616.

[9] Wen S. Z. Researches on the Micro-electromechanical System[ J]. China Mechanical Engineering, 2003, 14(2): 159-164.

[10] Bhushan B., Kulkarni A. V., Koinkar V. N. Microtribological Characterization of Self-assembled and Langmuir-Blodgett Monolayers by Atomic and Friction Force Microscopy[J]. Langmuir, 1995, 11: 3 189-3 198.

[11] Bliznyuk V. N., Everson M. P., Tsukruk V. V. Nanotribological Properties of Organic Boundary Lubricants: Langmuir Film versus Self-assembled Monolayers[J]. Journal of Tribology, 1998, 120: 489-495.

[12] Zhang P. Y., Xue Q. J., Liu W. M., . Tribological Behavior of MoS₂ Nanoparticle LB Films on Different Metal Substrate[ J]. Tribology, 1999, 19(2): 112-116.

[13] Tsukruk V. V., Luzinov I., Julthongpiput D. Sticky Molecular Surfaces: Epoxysilane Self-Assembled Monolayers[J]. Langmuir, 1999, 15: 3 029-3 032.

[14] Tatoulian M., Bouloussa O., Morie’re F., . Plasma Surface Modification of Organic Materials: Comparison between Polyethylene Films and Octadecyltrichlorosilane Self-Assembled Monolayers[J]. Langmuir, 2004, 20(24): 10 481-10 489.

[15] Robertson J. Diamond-like Amorphous Carbon[J]. Materials Science and Engineering R, 2002, 37: 129-281.

[16] Xie G., Zheng B., Li W., . Tribological Behavior of Diamond- Like Carbon Film with Different Tribo-pairs: A Size Effect Study[J]. Applied Surface Science, 2008, 254: 7 022-7 028.

[17] Bentzon M. D., Mogensen K., Hansen J. B. Metallic Interlayers Between Steel and Diamond-like Carbon[J]. Surface and Coatings Technology, 1994, 68–69: 651-655.

[18] Satyanarayana N., Sujeet K. S. Tribology of PFPE Overcoated Self-assembled Monolayers Deposited on Si Surface[J]. J. Phys. D: Appl. Phys., 2005, 38: 3 512-3 522.

[19] Tay B. K., Shi X., Tan H. S. Raman Studies of Tetrahedral Amorphous Carbon Films Deposited by Filtered Cathodic Vacuum Arc[J]. Surface and Coatings Technology, 1998, 105: 155-158.

[20] Li K. Y., Zhou Z. F., Chan C. Y., . Mechanical and Tribological Properties of Diamond-like Carbon Films Prepared on Steel by ECR-CVD Process[J]. Diamond and Related Materials, 2001, 10(9–10): 1 855-1 861.