Effect of nanophase on the nucleation of intragranular ferrite in microalloyed steel

Abstract

MnS, MnS+V(C, N) complex precipitates in micro-alloyed ultra-fine grained steels were precisely analyzed to investigate the grain refining mechanism. The experimental results shows that MnS, MnS+V(C, N) precipitates provide nucleation center for Intra-granular ferrite (IGF), so that refined grain remarkably. Moreover, substructures such as grain boundary, sub-boundary, distortion band, dislocation and dislocation cell in austenite increased as the deformation energy led by heavy deformation at low temperature (deformation temperature⩽800°C, deformation quantity⩾50%). As a result, V(C, N) nanophase precipitated at these substructures, which pinned and stabilized substructures. The substructures rotated and transformed into ultra-fine ferrite. 20 nm-50 nm were the best grain size range of V(C, N) as it provided nucleating center for intragranular ferrite. The grain size of V(C, N) were less than 30 nm in the microalloyed steels that with volume ratio of ultra-fine ferrite more than 80% and grain size less than 4 μm.

Keywords

intra-granular ferrite (IGF) / vanadium / MnS / nanophase / substructure

References

[1] Carlos C., Francisca G. C., Carlos G. M. The Role of Inclusions and Austenite Grain Size on Intragranular Nucleation of Ferrite in Medium Carbon Microalloyed Steels[J]. Materials Transactions, 2004, 8(45): 2678-2685.

[2] Yasuya O. Microstructural Evolution with Precipitation of Carbides in Steels[C], 2001, 6(41): 554-565.

[3] Sobral M., Mei P. R., Kestenback H. J. Effect of Carbonitride Particles Formed in Austenite on the Strength of Microalloyed Steels [J]. Materials Science and Engineering, 2004, 2(367): 317-321.

[4] Miyamoto G., Shinyoshi T., Yamaguchi J. Crystallography of Intragranular Ferrite Formed on (MnS+V(C, N)) Complex Precipitate in Austenite[J]. Scripta Materialia, 2003, 2(48): 371-377.

[5] He K., Edmonds D. V. Formation of Acicular Ferrite and Influence of Vanadium Alloying[J]. Material Science and Technology, 2002, 3(18): 289-296.

[6] Dong C. R., Ren H. P., Jin T. Z. Micro-alloy Quenched and Tempered Steel[M], 2000 Beijing Metallurgical Industry Press

[7] Park K. T., Kim Y. S., Shin D. H. Microstructural Stability of Ultrafine Grained Low-carbon Steel Containing Vanadium Fabricated by Intense Plastic Straining[J]. Metallurgical and Materials Transactions A, 2001, 9(32): 2373-2381.

[8] Dong H. Fundamental Research Report on 800MPa Grade High-Strength Low-Alloy Steel[R], 2003 Beijing China Iron & Steel Research Institute Group 7

[9] Yu H., Kang Y. L., Zhao Z. Z. Morphology and Precipitation Kinetics of MnS in Low-carbon Steel During Thin Slab Continuous Casting Process[J]. Journal of Iron and Steel Research, 2006, 9(13): 30-36.

[10] Ueshima Y., Sawada Y., Mizoguchi S. Precipitation behavior of MnS during δ/γ Transformation in Fe-Si Alloys[J]. Metal.Trans. A, 1989, 20A: 1375

[11] Hurley P. J., Muddle B. C., Hodgson P. D. Nucleation Sites for Ultrafine Ferrite Produced by Deformation of Austenite during Single-pass Strip Rolling[J]. Metallurgical and Materials Transactions, 2001, 6(32): 1507-1515.

[12] Niikura M., Fujioka M., Adachi Y. New Concepts for Ultra Refinement of Grain Size in Super Metal Project[J]. J. Mater. Proc. Tech., 2001, 117: 341-346.