Experimental study and property analysis of seal-filling hydrogel material for hermetic wall in coal mine

Abstract

The effects of monomer, crosslinker, and accelerator content on the mechanical property of seal-filling hydrogel material for building hermetic wall were analyzed through a series of single-direction compression experiments. Grey predication by GM(1,1) model was also used to analyze the persistent property of hydrogel material. The results showed that the elastic modulus and strength of seal-filling hydrogel increased, and the elastic tended to reduce with the growth of monomer and crosslinker content. In comparison, the effect of accelerator content was diametrically opposed. At the same time, staggered change of elastic modulus occurred and its demarcation point generally appeared at the point of 50% of vertical deformation value. In addition, through the testing of correlation degree, the accuracy of the grey prediction model to test the persistent stability of hydrogel material can be proved. As the concentration of hydrophilic monomer in hydrogel material increased, the stability was improved. The energy originated from explosion shock wave can be absorbed by seal-filling hydrogel through deformation.

Keywords

hermetic wall / hydrogel;mechanical property / persistent stability

References

[1] X M Zhu. Study and Discuss on Fly Ash Comprehensive Utilization in Jincheng Mine[J]. Fly Ash, 2003(1): 28–30

[2] W B Chen, Y Qiu. Application of Rapid Sealing in Avoiding Wind Leakage to Resume Produce[J]. Mine Safety, 1996(4): 22–23

[3] Jin L. Z., Jin R. Y., Jiang Z. G. Application of Seal-filling Material in Mine Safety Foaming Resin and Its Application Technology[J]. China Safety Science Journal, 1998, 8(5): 32-36.

[4] Qiu C. L., Zhang X. T. Technology of Lukexin Foam Product Applied in Jining No.2 Mine[J]. Coal Science and Technology, 2003, 31(6): 59-60.

[5] F J Guo, Sh H Feng. Bag-type Rapid Sealing[J]. Mine Safety, 1998(3): 45–47

[6] Wang G. C., Dai X. P., Deng G. H. Research on High Temperature Resistance and Rapid Sealing of Inflation-parachute[J]. Ming Safety & Environmental Protection, 2000, 27(6): 5-6.

[7] Liu S. C. Mechanical Properties of Polymer Hydrogels for Water Plugging and Profile Modification[J]. Oilfield Chemistry, 1995, 12(4): 332-333.

[8] Xu Z. S., Xu Z. L., Feng K. Analysis for Damage Degree of Reinforced Concrete after Firing Based on Grey Degree of Incidence[J]. Journal of Seismology, 2003, 23(3): 37-40.

[9] Han S., Liu G. Q. The Optimization Method Grey Model and Its Application in Groundwater Prediction[J]. Journal of Changchun University of Science and Technology, 1994, 24(4): 429-434.