A finite element simulation of NiTi alloy during equal channel angular extrusion

Weizhi Wang; Xianhua Chen

doi:10.1007/s11595-010-0101-4

Journal of Wuhan University of Technology Materials Science Edition ›› 2010, Vol. 25 ›› Issue (5) : 824 -828. DOI: 10.1007/s11595-010-0101-4

Article

A finite element simulation of NiTi alloy during equal channel angular extrusion

Weizhi Wang ¹
, Xianhua Chen ¹^,^{^b}

Author information +

History +

PDF

Abstract

Particle tracking method is given to analyze the equal channel angular extrusion (ECAE) process of NiTi alloy in non-isothermal condition. The distribution of effective strain, effective stress, the temperature, and strain rate of selected particle tracking points is analyzed respectively. The influence of friction factor is also discussed. The experimental results show that under non-isothermal condition, distribution of strain, stress, strain rate and temperature are inconsistent on relative plane. Final result indicates that distribution of effective strain on xz plane is obviously different from those of isothermal condition; load predication reveals friction factor in this mechanism made little influence on the gross of load.

Keywords

ECAE / finite element analysis / NiTi

Cite this article

Download citation ▾

Weizhi Wang, Xianhua Chen. A finite element simulation of NiTi alloy during equal channel angular extrusion. Journal of Wuhan University of Technology Materials Science Edition, 2010, 25(5): 824-828 DOI:10.1007/s11595-010-0101-4

登录浏览全文

4963

注册一个新账户忘记密码

References

Publishing order | Descend order by publishing year | Descend order by cited within

[1]	Segal V. M. Material Processing by Simple Shear[J]. Materials Science and Engineering A, 1995, 197(2): 157-164.

[2]	Ko Y. G., Jung W. S., Shin D. H., . Effects of Temperature and Initial Microstructure on the Equal Channel Angular Pressing of Ti-6Al-4 V Alloy[J]. Scripta Materialia, 2003, 48(2): 197-202.

[3]	Semiatin S. L., Delo D. P. Equal Channel Angular Extrusion of Difficult-to-work Alloys[J]. Mater Design, 2002, 21(4): 311-322.

[4]	Kim J. K., Kim W. J. Analysis of Deformation Behavior in 3D During Equal Channel Angular Extrusion[J]. Journal of Materials Processing Technology, 2006, 176(1–3): 260-267.

[5]	Zhang Z. J., Son I. H., Im Y. T., . Finite Element Analysis of Plastic Deformation of CP-Ti by Multi-pass Equal Angular Extrusion at Medium Hot-working Temperature[J]. Materials Science and Engineering A, 2007, 447: 134-141.

[6]	Xiang G. Q., Wu J., Cheng X. H. Effective of ECAE Preheating on Grain Refining of Nickel-Titanium Alloy[J]. JOURNAL OF RARE EARTHS, 2004, S.22: 164-166.

[7]	Lassraoui A., Jonas J. J. Prediction of the Steel Flow Stresses at High Temperatures and Strain Rate[J]. Metall. Trans., 1991, 22A: 1 545-1 548.

[8]	Zhang W. H., Zhang S. H. Correction of Hot Compression Test Data and Constitutive Equation of NiTi Alloy[J]. Acta Metallurgica Sinica, 2006, 42(10): 1 034-1 040.

[9]	Tian W. C., Wu J. S. Characteristics of Phase Transformation Thermodynamics for NiTi Wires Under Non-isothermal Conditions[J]. Journal of Shanghai Jiaotong University, 2001, 35(5): 651-654.

[10]	Chung S. W., Somekawa H., Kinoshita H., . The Non-uniform Behavior During ECAE Process by 3-D FVM Simulation[J]. Scripta Materialia, 2004, 50(7): 1 079-1 083.

[11]	Iwahashi Y. Principle of Equal-channel Angular Pressing for the Processing of Ultra-fine Grained Materials[J]. Scripta Materialia, 1996, 35(2): 143-146.