The early hydration and strength development of high-strength precast concrete with cement/metakaolin systems

Abstract

To study the relationship between material composition, curing conditions and strength development, the study simulated high-strength precast concrete pile production, and a high-strength mortar up to 90 MPa was designed and a hot-water pool was built for concrete curing. The major point of the study was to achieve a high early strength by using cement/metakaolin systems without autoclave curing with high-pressure steam. By means of XRD and thermal analysis, the progress of the hydration of the cement pastes blended with metakaolin was characterized. The main results indicate that high strength can be obtained at early age by the use of metakaolin and thermal treatment (hot-water curing). The improvement in strength of mortars with metakaolin can be explained by an increase in the amount of C-S-H and C-S-A-H hydrated phases and a decrease in the amount of calcium hydration(CH). Further more, a decrease in Ca/Si ratio of the matrix was observed from the results of EDX analysis, which also leaded to an improvement of the compressive strength. These results are of great importance for the high-strength precast concrete manufacturing industry.

Keywords

metakaolin / early age / hot-water curing / hydration product

References

[1] Lopez-Mesa B., Pitarch A., Tomas A., Gallego T. Comparison of Environmental Impacts of Building Structures with in Situ Cast Floors and with Precast Concrete Floors[J]. Building and Environment, 2009, 44: 699-712.

[2] Chan T. K., Poh C. K. Behaviour of Precast Reinforced Concrete Pile Caps[J]. Construction and Building Materials, 2000, 14: 73-78.

[3] Gartner E. Industrially Interesting Approaches to “Low-CO₂” Cements[J]. Cement and Concrete Research, 2004, 34: 1489-1498.

[4] Tan K.-f., Nichols J. M. Performances of Concrete under Elevated Curing Temperature[J]. Journal of Wuhan University of Technology-Materials Science Edition, 2004, 19(3): 65-67.

[5] Aldea C.M., Young F., Wang K., Shah S.P. Effects of Curing Conditions on Properties of Concrete Using Slag Replacement[J]. Cement and Concrete Research, 2000, 30: 465-472.

[6] Shi C., Hu S. Cementitious Properties of Ladle Slag Fines under Autoclave Curing Conditions[J]. Cement and Concrete Research, 2003, 33: 1851-1856.

[7] Mazloom M., Ramezanianpour A.A., Brooks J.J. Effect of Silica Fume on Mechanical Properties of High-strength Concrete[J]. Cement & Concrete Composites, 2004, 26: 347-357.

[8] Brooks J.J., Megat Johari M.A., Mazloom M. Effect of Admixtures on the Setting Times of High-strength Concrete[J]. Cement & Concrete Composites, 2000, 22: 293-301.

[9] Sata V., Jaturapitakkul C., Kiattikomol K. Influence of Pozzolan from Various By-product Materials on Mechanical Properties of High-strength Concrete[J]. Construction and Building Materials, 2007, 21: 1589-1598.

[10] Poon C. S., Kou S. C., Lam L. Pore Size Distribution of High Performance Metakaolin Concrete[J]. Journal of Wuhan University of Technology-Materials Science Edition, 2002, 17(1): 42-46.

[11] Khatib J.M. Metakaolin Concrete at a Low Water to Binder Ratio[J]. Construction and Building Materials, 2008, 22: 1691-1700.

[12] Cassagnabere F., Mouret M., Escadeillas G. Early Hydration of Clinker-slag-metakaolin Combination in Steam Curing Conditions, Relation with Mechanical Properties[J]. Cement and Concrete Research, 2009, 39: 1164-1173.

[13] Sabir B.B., Wild S., Bai J. Metakaolin and Calcined Clays as Pozzolans for Concrete: a Review[J]. Cement & Concrete Composites, 2001, 23: 441-454.

[14] Richardson I.G. Tobermorite/jennite-and Tobermorite/ calcium Hydroxide-based Models for the Structure of C-S-H: Applicability to Hardened Pastes of Tricalcium Silicate, h-dicalcium Silicate, Portland cement, and Blends of Portland Cement with Blast-furnace Slag, Metakaolin, or Silica Fume[J]. Cement and Concrete Research, 2004, 34: 1733-1777.