Size determination of ultramicropores and small mesopores using a calculation procedure based on the tangents of comparison plot

Qin Qiu , Jie Zhan , Shiquan Liu

Journal of Wuhan University of Technology Materials Science Edition ›› 2010, Vol. 25 ›› Issue (3) : 391 -394.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2010, Vol. 25 ›› Issue (3) : 391 -394. DOI: 10.1007/s11595-010-0008-0
Article

Size determination of ultramicropores and small mesopores using a calculation procedure based on the tangents of comparison plot

Author information +
History +
PDF

Abstract

Pore size distribution (PSD) curves of synthesized hollow silica spheres with ultrmicropores and small mesopores were obtained from calculations based on the BJH, KJS, SF, MP, NLDFT models and Prof. Zhu’s method. Comparisons indicate that Zhu’s method not only gives reasonable small mesopore size but also could be further extended to the ultramicropores region for the PSD evaluation.

Keywords

pore size distribution / comparison plot / ultramicropores / mesopores

Cite this article

Download citation ▾
Qin Qiu, Jie Zhan, Shiquan Liu. Size determination of ultramicropores and small mesopores using a calculation procedure based on the tangents of comparison plot. Journal of Wuhan University of Technology Materials Science Edition, 2010, 25(3): 391-394 DOI:10.1007/s11595-010-0008-0

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Rouquerol F., Rouquerol J., Sing K. Adsorption by Powders and Porous Solids[M], 1999 London Academic Press 191-236.

[2]

Ravikovitcha P. I., Hallera G. L., Neimark A. V. Density Functional Theory Model for Calculating Pore Size Distributions: Pore Structure of Nanoporous Catalysts[J]. Adv. Colloid Interf. Sci., 1998, 76: 203-226.

[3]

Groen J. C., Peffer L. A. A., Perez-Ramirez J. Pore Size Determination in Modified Micro-and Mesoporous Materials. Pitfalls and Limitations in Gas Adsorption Data Analysis[J]. Micro. Meso. Mater., 2003, 60: 1-17.

[4]

Kruk M., Jaroniec M., Sayari A. Adsorption Study of Surface and Structural Properties of MCM-41 Materials of Different Pore Sizes[J]. J. Phys. Chem. B, 1997, 101(4): 583-589.

[5]

Zhu H., Cool P., Vansant E. F., . Quantitative Information on Pore Size Distribution from the Tangents of Comparison Plots[J]. Langmuir, 2004, 20(23): 10 115-10 122.

[6]

Cheng X., Liu S., Lu L., Sui X., . Fast Fabrication of Hollow Silica Spheres with Thermally Stable Nanoporous Shells[J]. Micro. Meso. Mater., 2007, 98: 41-46.

[7]

Sing K. S. W. Reporting Physisorption Data for Gas/Solid Systems with Special Reference to the Determination of Surface Area and Porosity[J]. Pure Appl. Chem., 1985, 57(4): 603-619.

[8]

Coasne B., Grosman A., Dupont-Pavlovsky N., . Adsorption in an Ordered and Non-interconnected Mesoporous Material: Single Crystal Porous Silicon[J]. Phys. Chem. Chem. Phys., 2001, 3: 1 196-1 200.

[9]

Borghard W. S., Teischman P. T., Sheppard E. W. Argon Sorption in ZSM-5[J]. J. Catal., 1993, 139(1): 19-23.

[10]

Raman N. K., Anderson M. T., Brinker C. J. Template-based Approaches to the Preparation of Amorphous, Nanoporous Silicas[J]. Chem. Mater., 1996, 8: 1 682-1 701.

AI Summary AI Mindmap
PDF

112

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/