Preparation and microstructure of spinel zinc ferrite ZnFe2O4 by Co-precipitation method
Ping Ren , Junxi Zhang , Huiyong Deng
Journal of Wuhan University of Technology Materials Science Edition ›› 2009, Vol. 24 ›› Issue (6) : 927 -930.
Preparation and microstructure of spinel zinc ferrite ZnFe2O4 by Co-precipitation method
Spinel zinc ferrites ZnFe2O4, prepared by co-precipitation method using the zinc nitrate Zn(NO3)2·6H2O and ferric nitrate Fe(NO3)3·2H2O as the raw materials, were characterized by the thermo gravimetric analysis (TG) and differential scanning calorimeter (DSC), X-ray diffraction (XRD) and scanning electron microscope (SEM). The influence of synthesis conditions, such as Zn/Fe molar ratio, pH value, the sintering temperature and time, on the microstructures was detailedly investigated. The relationships between the microstructures and the synthesis conditions were discussed. The results show that the pure spinel zinc ferrites ZnFe2O4 are formed when the Zn/Fe molar ratio is 1.05:2 at pH=8.5 or Zn/Fe molar ratio is 1:2 at Ph=9-10, and the precursors are sintered at 1100 °C for 4 h. Especially no other phases are observed when the Zn/Fe molar ratio is 1:2 at pH=10 and the precursor is sintered above 700 for 4 °C h. The higher sintering temperature and longer sintering time contribute to grain growth.
zinc ferrites / ZnFe2O4 / microstructures / co-precipitation
| [1] |
|
| [2] |
|
| [3] |
|
| [4] |
|
| [5] |
|
| [6] |
|
| [7] |
|
| [8] |
|
| [9] |
|
| [10] |
|
| [11] |
|
| [12] |
|
| [13] |
|
| [14] |
|
| [15] |
|
| [16] |
|
| [17] |
|
| [18] |
|
| [19] |
|
| [20] |
|
| [21] |
|
| [22] |
|
| [23] |
|
| [24] |
|
| [25] |
|
| [26] |
|
| [27] |
J C Yu, J G Yu, W K Ho, Z T Jiang, L Z Zhang. Effects of F-Doping on the Photocatalytic Activity and Microstructures of Nanocrystalline TiO2 Powders. Chem. Mater, 2002(14): 3808–3816 |
| [28] |
R Arulmurugan, G Vaidyanathan, S Sendhilnathan, B Jeyadevan. Mn-Zn Ferrite Nanoparticles for Ferrofluid Preparation: Study on Thermal-magnetic Properties[J]. Journal of Magnetism and Magnetic Materials, 2006(298): 83–94 |
/
| 〈 |
|
〉 |