Tensile and flexural properties of ultra high toughness cemontious composite

Abstract

The tensile and flexural properties of polyvinyl alcohol (PVA) fiber reinforced ultra high toughness cementitious composite (UHTCC) were investigated. The composite, tested at the age of 14 d, 28 d and 56 d, shows extremely remarkable pseudo strain hardening behavior, saturated multiple cracking and ultra high ultimate strain capacity above 4% under uniaxial loading. Also, the corresponding crack widths are controlled under 50 μm even at 56 days age. In the third point bending tests on thin plate specimens, the composite shows ultra high flexural ductility and multiple cracking on the tension surface. The high ultimate flexural strength/first tensile strength ratio of about 5 verifies the pseudo strain hardening behavior of UHTCC. SEM observation on fracture surfaces provides indirect evidence of optimal design for the composite.

Keywords

pseudo strain hardening / cementitious composite / multiple cracking / ductility / SEM

References

[1] Naaman A.E., Homrich J.R. Tensile Stress-strain Properties of SIFCON [J]. ACI Materials J., 1989, 86(3): 244-251.

[2] Neven K.-O., Sary M. Tensile Behavior of Slurry inFiltrated Mat Concrete (SIMCON) [J]. ACI Materials Journal, 1997, 94(1): 39-46.

[3] Benson S.D.P., Karihaloo B.L. CARDIFRC [registered trademark]-Development and mechanical properties. Part III: Uniaxial Tensile Response and Other Mechanical Properties [J]. Magazine of Concrete Research, 2005, 57(8): 433-443.

[4] Li V.C., Leung C.K.Y. Steady State and Multiple Cracking of Short Random Fiber Composites [J]. Journal of Engineering Mechanics, ASCE, 1992, 188(11): 2246-2264.

[5] Xu S., Li H., Zhang Y., . Process report on South-North Water Transfer Project Construction in China, Reaseach on Ultra High Toughness Cementitious Composite and Its Applications [R], 2007 Dalian Dalian University of Technology

[6] Lin Z., Li V.C. Crack Bridging in Fiber Reinforced Cementitious Composites with Slip-hardening Interfaces [J]. Journal of Mechanics and Physics of Solids, 1997, 45(5): 763-787.

[7] Wang T. Crack Control of Engineering Structures [M], 1997 Beijing China Building Industry Press

[8] Maalej M., Li V.C. Flexural/Tensile Strength Ratio in Engineered Cementitious Composites [J]. Journal of Materials in Civil Engineering, ASCE, 1994, 6(4): 513-528.

[9] Maalej M. Fracture Resistance of Engineered Fiber Cementitious Composites and Implications to Structural Behavior [D], 1994 USA University of Michigan

[10] Li V. C., Maalej M., Hashida T. Experimental Determination of Stress-crack Opening Relation in Fiber Cementitious Composites with Crack Tip Singularity [J]. Journal of Materials Science, 1994, 29(10): 2719-2724.

[11] Maalej M., Li V. C. Flexural Strength of Fiber Cementitious Composites [J]. Journal of Materials in Civil Engineering, ASCE, 1994, 6(3): 390-406.