Preparation of material surface structure similar to hydrophobic structure of lotus leaf

Abstract

Nano/micro replication, a technique widely applied in the microelectronics field, was introduced to prepare the hydrophobic bionics microstructure on material surface. Poly(vinyl alcohol) (PVA) and polystyrene (PS) moulds of the mastoid microstructure on lotus leaf surface were prepared respectively by the nano/micro replication technology. And poly(dimethylsiloxane) (PDMS) replicas with the mastoid-like microstructure were prepared from these two kinds of polymer moulds. Scanning electronic microscope (SEM) was employed to investigate the morphology and microstructures on moulds and replicas. Both the static and dynamic contact angles between water droplet and PDMS replicas’ surface were also measured. As a result, similar microstructure can be observed clearly on the surface of PDMS replicas and the static contact angle on PDMS replicas was enhanced dramatically by the existence of these microstructures.

Keywords

hydrophobic / bionics / surface structure / nano/micro replication

References

[1] Feng L., Li S., Li Y., . Super-hydrophobic Surface: from Natural to Artificial[J]. Advanced Materials, 2002, 14(24): 1857-1860.

[2] Nakajima A., Hashimoto K., Watanabe T. Recent Studies on Super-hydrophobic Films[J]. Monatshefte für Chemie, 2001, 132(1): 31-41.

[3] Nakajima A., Fujishima A., Hashimoto K., . Preparation of Transparent Superhydrophobic Boehmite and Silica Films by Sublimation of Aluminum Acetylacetonate[J]. Advanced Materials, 1999, 11(16): 1365-1368.

[4] Ma L. Research of the Waterproof Textile Based on the Lotus Effect[J]. Shanghai Texttile Science and Technology, 1996, 23(1): 50-52.

[5] Nosonovsky M., Bhushan B. Roughness Optimization for Biomimetic Superhydrophobic Surfaces[J]. Microsystem Technologies, 2005, 11(8–10): 535-549.

[6] Barthlott W., Neinhuis C. Purity of the Sacred Lotus, or Escape from Contamination in Biological Surface[J]. Planta, 1997, 202(1): 1-8.

[7] Fan X. Q., Zhang H. H., Jia K., . Research on Bionic Funcitional Surface of MEMS Based on Lotus Effect[J]. Journal of Wuhan University of Technology, 2005, 27(10): 47-49.

[8] Guo X.-l., Xie Q.-d., Zhao N., . Developments of Bionic Polymers[J]. Progress in Chemistry, 2004, 16(6): 1023-1029.

[9] Sungil C., Yonggwan I., Jaeyoung C., . Microreplication Techniques Using Soft Lithography[J]. Microelectronic Engineering, 2004, 75(2): 194-200.

[10] Choi D. G., Yu H. K., Yang S. M. 2D Nano/micro Hybrid Patterning Using Soft/block Copolymer Lithography[J]. Materials Science and Engineering C, 2004, 24(2): 213-216.

[11] Bogdanski N., Schulz H., Wissen M., . 3D-Hot Embossing of Undercut Structures-an Approach to Micro-zippers[J]. Microelectronic Engineering, 2004, 73(2): 190-195.

[12] Parashar V. K., Sayah A., Pfeffer M., . Nano-replication of Diffractive Optical Elements in Sol-gel Derived Glasses[J]. Microelectronic Engineering, 2003, 67–68(1): 710-719.

[13] Dai J., Guan Y. X., Wang S. L., . Feature Characterization of Microfabricated Microfluidic Chips by PDMS Replication and CCD Imaging[J]. Analytical and Bioanalytical Chemistry, 2005, 381(4): 839-843.

[14] Niu Z. Q., Gao F., Jia X. Y., . Synthesis Studies of Sputtering TiO2 Films on Poly(Dimethylsiloxane) for Surface Modification[J]. Colloids and Surface A, 2006, 272(3): 170-175.

[15] Li K. Y. Physics and Chemistry of the Colloid and the Interface[M], 1998. Harbin: Press of Harbin Institute of Technology. 90-92.