Research on composite PZT for large-displacement actuators
Xing Shen , Renwen Chen , Yun Li , In Lee
Journal of Wuhan University of Technology Materials Science Edition ›› 2007, Vol. 22 ›› Issue (4) : 710 -713.
Research on composite PZT for large-displacement actuators
A new kind of composite piezoelectric ceramics for large-displacement actuators, which were composed of reduced and unreduced layers, was prepared from normal PZT by chemical reduction. The stress distribution inside the composite PZT was researched and the chemical reduction conditions were explored. The actuating properties of reduced PZT were also studied. It is found that the optimal ratio of reduced layer thickness for the composite structure is 0.3; Reduced composite PZT has lower resonance frequency and 3 times larger displacement than that of the traditional PZT; Re-oxide phases are found in reduced layer of composite PZT showing the reduction procedure needs to be improved.
composite / PZT / stress / chemical reduction / actuator
| [1] |
Kugel, V D and Vhandran, Sanjay. Comparative Analysis of Piezoelectric Bending-mode Actuators[C]. Smart Microstructures and Materials Conference, San Diego, USA, 1997: 303–304 |
| [2] |
|
| [3] |
|
| [4] |
|
| [5] |
|
| [6] |
Mossi K M and Bishop R P. Characterization of Different Types of High Performance THUNDER Actuators[C]. In:Proc. of SPIE Conference, Newport Beach CA., US 1999, 3675–05 |
| [7] |
|
| [8] |
|
| [9] |
|
| [10] |
|
/
| 〈 |
|
〉 |