Surface and electrical properties of NiCr thin films prepared by DC magnetron sputtering

Abstract

Several batches of NiCr alloy thin films with different thickness were prepared in a multi-targets magnetron sputtering apparatus by changing sputtering time while keeping sputtering target power of Ni and Cr fixed. Then the as-deposited films were characterized by energy-dispersive X-Ray spectrometer (EDX), Atomic Force Microscope (AFM) and four-point probe (FPP) to measure surface grain size, roughness and sheet resistance. The film thickness was measured by Alpha-Step IQ Profilers. The thickness dependence of surface roughness, lateral grain size and resistivity was also studied. The experimental results show that the grain size increases with film thickness and the surface roughness reaches the order of nanometer at all film thickness. The as-deposited film resistivity decreases with film thickness.

Keywords

magnetron sputtering / NiCr alloy films / surface morphology / resistivity

References

[1] Kazi I. H., Wild P. M., Moore T. N. The Electromechanical Behavior of Nichrome (80/20 wt.%) Film[J]. Thin Solid Films, 2003, 433(1–2): 337-343.

[2] Alonso G., Garcia J., Castano E. Strain Sensitivity and Temperature Influence on Sputtered Thin Films for Piezoresistive Sensors[J]. Sensors and Actuators A, 1993, 37–38(6–8): 784-789.

[3] Sato Y., Watanabe M., Sato S. Electrical Properties of Ni-Cr-N Thin Films Deposited by Multitarget Reactive Sputtering [J]. The Japan Society of Applied Physics, 2001, 40(8): 5091-5094.

[4] Zhou J. C., Peng Y. Q. Effects of Heat Treatment Process on Thin Film Alloy Resistance and its Stability[J]. Journal Central South Universal Technology, 2003, 10(2): 91-93.

[5] Kang H. J., KiC H. m. Referential Sputtering and Surface Segregation of CuZr Alloys[J]. Applied Surface Science, 1996, 100–101: 329-332.

[6] Stefanov P., Stanchev A. Surface Segregation and Preferential Sputtering in Thin Al-Ni Alloy Films[J]. Materials Chemistry and Physics, 1997, 50(3): 209-212.

[7] Liu J. S. Ion Beam Deposition Film Technology and Application [M], 2003. Beijing: the National Defense Industry Publishing Company. 41

[8] Wang D. L., Geyer U., Schneider S. Grain Size of Ni Films Measured by STM and X-ray Methods[J]. Thin Solid Films, 1997, 292(1–2): 184-188.

[9] Day M. E., Delfino M., Fair J. A. Correlation of Electrical Resistivity and Grain Size in Sputtered Titanium Films[J]. Thin Solid Films, 1995, 254(1–2): 285-290.

[10] Musil J., Vlcek J. Magnetron Sputtering of Films with Controlled Texture and Grain Size[J]. Material Chemistry and Physics, 1998, 54(1–3): 116-122.

[11] Musil J., Vlcek J. Magnetron Sputtering of Alloy and Alloy-based Films [J]. Thin Solid Films, 1999, 343–344: 47-50.

[12] Musil J., Regent F. Formation of Nanocrystalline NiCr-N Films by Reactive dc Magnetron Sputtering[J]. J Vac. Sci. Tchnol. A, 1998, 16(6): 3301

[13] Zhao Y. d., Qian Y. T., Yu W. C. Surface Roughness of Alumina Films Eeposited by Reactive r.f. Sputtering[J]. Thin Solid Films, 1996, 286(1–2): 45-48.

[14] Kim H. W., Kim N. H. Annealing Effect for Structural Morphology of ZnO Film on SiO₂ Substrates[J]. Material Science in Semiconductor Processing, 2004, 7(1–2): 1-6.

[15] H Liu D., Zhao Y. P., Ramanath G. Thickness Dependent Electrical Resistivity of Ultrathin(<40 nm) Cu Films[J]. Thin Solid Films, 2001, 384(1): 151-156.

[16] Schröder K., Hollander J. Electrical Resistance of Ultra Thin Ag-, Cu-and Mn-films on Ge-substrates[J]. Thin Solid Film, 2004, 458(1–2): 322-332.

[17] Kulkarn A. K., Chang L. C. Electrical and Structural Characteristics of Chromium Thin Films Deposited on Glass and Alumina Substrates[J]. Thin Solid Films, 1997, 301(1–2): 17-22.