Phase representation and property determination of raw materials of solid lubricant

Huogui Yu , Ping Hu , Ting Shang , Ming Jiang , Qian Chen

Journal of Wuhan University of Technology Materials Science Edition ›› 2008, Vol. 23 ›› Issue (1) : 130 -133.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2008, Vol. 23 ›› Issue (1) : 130 -133. DOI: 10.1007/s11595-006-1130-x
Article

Phase representation and property determination of raw materials of solid lubricant

Author information +
History +
PDF

Abstract

The composition, microstructure, mechanical and frictional properties of PTFE and its fillers were represented and analyzed by XRD, SEM, DSC, XPS and large-scale polarizing microscope. The results show that PTFE has a flocculent structure with high melt temperature and decomposition temperature, big contact angle and crystallinity, and low surface hardness, compression strength, friction coefficient, wearing capacity and surface energy. Cooling rate influenced the friction coefficient and wear resistance. Graphite and molybdenum disulfide have a flake structure, and molybdenum disulfide has a big contact angle and low surface energy. Copper powder has a globular structure and its chief component is Cu-Pb alloy, and there is a loose layer on the surface. Carbon fiber has a rod structure and there are C=O and C-O-C polar groups on the skeleton surface. The decreasing order of water absorption capacity is graphite, carbon fiber, molybdenum disulfide, PTFE and copper powder.

Keywords

solid lubrication / composite material / structure representation / property determination

Cite this article

Download citation ▾
Huogui Yu, Ping Hu, Ting Shang, Ming Jiang, Qian Chen. Phase representation and property determination of raw materials of solid lubricant. Journal of Wuhan University of Technology Materials Science Edition, 2008, 23(1): 130-133 DOI:10.1007/s11595-006-1130-x

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Zhang H. B. Research on the Friction and Wear Property of PTFE Compound Material[D], 2003. Tianjin: Hebei University of Technology.

[2]

Dang H. X., Fan Y., Oyang J. L. Development Survey of Solid Lubricant in Japan[J]. Solid Lubrication, 1981, 1: 4-10.

[3]

Yan Z. G. Lubrication Material and Technology[M], 2000. Beijing: China Petrochemical Press.

[4]

Gong D. L., Xue Q. J. Transfer and Wear of PTFE and PTFE Compound Material[J]. Solid Lubrication, 1990, 4: 73-79.

[5]

Peng B., Zhang Y. J. Test and Application of Filling PTFE Compound Material[J]. Lubrication Engineering, 1991, 2: 43-47.

[6]

Gong D., Zhang B., Xue Q., . Investigation of Adhesion Wear of Filled PTFE by ESCA, AES and XRD[J]. Wear, 1990, 137: 25-29.

[7]

Teng F. E., Wang Y. M., Jiang X. L. X-ray Structure Analysis and Material Property Indication[M], 1997. Beijing: China Science Press.

[8]

Briggs D. Surface Analysis of Polymer[M], 2001. Beijing: China Chemical Industry Press.

[9]

Seo Y. Noisothermal Crystallization Kinetics of Polyte trafluoroethylene[J]. Polymer Engineering and Science, 2000, 40(6): 1 293-1 297.

[10]

Compound Materials Research Institute of Chemical Department. Practical Handbook on Ageing Resistance of Polymers[M], 1999. Beijing: Chemical Industry Press. 6

AI Summary AI Mindmap
PDF

122

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/