Microstructures and mechanical properties of TiC particle reinforced TiAl composites by spark plasma sintering

Abstract

Using spark plasma sintering(SPS) technique, TiC particle reinforced γ-TiAl composites were prepared with varying weight fraction of TiC powders. The effects of the TiC fractions and distributions on the properties of the composites were investigated. The composite containing 7wt% TiC had the optimum three-point bending strength of 842 MPa, which was 200 MPa greater than that of the unreinforced γ-TiAl intermetallic. The degradation of the bending strength occurred in the composites containing more than 7wt% TiC and this was believed to be attributed to agglomerated particles of TiC, which acted as crack initiation and propagation sites. The increase of strength in TiC reinforced IMCs came from the grain refinement and the interaction of dislocations with the reinforcing particles. The bending strength of the IMC containing 7wt% TiC was theoretically estimated to increase by 85 MPa and 200 MPa, respectively, by the grain refinement and dislocation strengthening, the total of which was almost in accordance with the improvement in that of the unreinforced γ-TiAl intermetallic when considering normal estimation errors.

Keywords

TiC / TiAl composites / mechanical properties / grain refinement / dislocation strengthening / SPS sintering technique

References

[1] Kim Y. W. Ordered Intermetallic Alloys, Part III: Gamma Titanium Aluminides [J]. JOM, 1994, 46(7): 30-39.

[2] Deve H. E., Evans A. G., Shih D. S. A High-toughnessγ-Titanium Aluminides[J]. Acta. Metall. Mater., 1992, 40(6): 1259-1264.

[3] Vanmeter M. L., Kampe S. L., Christodoulou L. Mechanical Properties of Near-γ Titanium Aluminides Reinforced with High Volume percentage TiB₂[J]. Scripta. Metall. Mater., 1996, 34(8): 1251-1256.

[4] Mei b., Chen Y.-l., He l.-p., . Hardness Measurement of (TiB₂-TiAl)/TiAl Symmetrically Function Gradient Materials[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2002, 17(1): 1-4.

[5] Wrzesinski W. R., Rawers J. C. Self-Propagating High-temperature Synthesis of TiAl-SiC and TiAl-Al₂O₃[J]. Intermetallic Composites. J.Mater. Sci. Let., 1990, 9: 432-435.

[6] Mabuchi H., Harada K., Tsuda H., . Fabrication of Ti₂AlC/TiAl Composites Using Combustion Reaction Process [J]. ISIJ International, 1991, 31(10): 1272-1278.

[7] Yoshimura M., Ohji T., Sando M. Synthesis of Nanograined ZrO₂-Based Composites by Chemical Processing and Pulse Electric Current Sintering[J]. Materials. Letters., 1999, 38: 18-21.

[8] Angerer P., Neubauer E., Yu L.G., Khor K.A. Texture and Structure Evolution of Tantalum Powder Samples dureing Spark-plasma-sintering(SPS) and Conventional Hot-pressing[J]. International Journal of Refractory Metals and Hard Materials, 2007, 25(4): 280-285.

[9] Lee J. K., Kim H. J., Kim T. S., . Deformation behavior of Ni-based Bulk metallic Glass Synthesized by Spark Plasma Sintering[J]. Journal of Materials Processing Technology, 2007, 187(12): 801-804.

[10] Kimura H., Toda K. Design and Development of Functionally Graded Materials by Pulse Discharge Resistance Consolidation with Temperature Gradient Control[J]. Power Metallurgy, 1996, 39(1): 59-62.

[11] Yue Y.-l., Gong Y.-s., Wu H.-t., . Fabrication and Mechanical Properties of TiC Particles Reinforced TiAl Composite[J]. Journal of Wuhan University of Technology—Mater. Sci.Ed., 2004, 19(1): 1-4.

[12] Yue Y.L., Gong Y.S., Shen Q., Zhang L.M. Combustion Synthesis of γ-TiAl Intermetallic Compound Powder[J]. Key Engineering Materials, 2003, 24(9): 467-470.

[13] Van Meter M. L., Kampe S. L., Christodoulou L. Mechanical Properties of Near-γ Titanium Aluminides Reinforced with High Volume Percentages of TiB₂[J]. Scripta Materialia, 1996, 34(8): 1251-1256.

[14] Rapp R. A., Zheng X. J. Thermodynamic Consideration of Grain Refinement of Aluminum Alloy by Titanium and Carbon [J]. Metall. Trans., 1991, 22A(12): 3071-3076.

[15] Lai zuhan. Zhang T. Fracture Toughness of (α+β) Titanium Alloys[C]. Titanium Science and Engineering, 6th National Academic Discussion on Titanium and Its Alloys, 1987. Beijing: Atomic Energy Press. 14-18.