Effects of adhesive composition on green joining of CePO4−ZrO2 ceramics

Tian Boran , Liu Jiachen , Zhao Yuhong , Liu Mingzheng

Journal of Wuhan University of Technology Materials Science Edition ›› 2005, Vol. 20 ›› Issue (1) : 17 -20.

PDF
Journal of Wuhan University of Technology Materials Science Edition ›› 2005, Vol. 20 ›› Issue (1) : 17 -20. DOI: 10.1007/BF02870864
Article

Effects of adhesive composition on green joining of CePO4−ZrO2 ceramics

Author information +
History +
PDF

Abstract

Green bodies of 25% CePO4/ZrO2 and ZrO2 ceramics were joined at 1450°C for 120 min without applied pressure by using mixed powders slurries composed of CePO4 and ZrO2. The effects of CePO4/(CePO4+ZrO2) ratio of the adhesive on the bond strength of the joints were investigated. Maximum bond strength of 414MPa was obtained by joining an adhesive with the ratio of 0.5. Under the experimental conditions, the grain size of the particles grown in the joint was smaller than that in joined ceramics. The microstructure of the joint was more homogeneous than that of the matrix and without obvious cracks, pores and other defects.

Keywords

green body / slurries / joint / interface

Cite this article

Download citation ▾
Tian Boran, Liu Jiachen, Zhao Yuhong, Liu Mingzheng. Effects of adhesive composition on green joining of CePO4−ZrO2 ceramics. Journal of Wuhan University of Technology Materials Science Edition, 2005, 20(1): 17-20 DOI:10.1007/BF02870864

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Hanson W B, Ironside K I, Fernie J A. Active Metal Brazing of Zirconia. J. A. Acta Materialia, 2000, 48(18–19): 4673-4676.

[2]

Janickovic D, Šebo P, Duhaj P, Švec P. The Rapidly Quenched Ag−Cu−Ti Ribbons for Active Joining of Ceramics. Materials Science and Engineering, 2001, 304–306: 569-573.

[3]

Dilermando Travessa, Maurizio Ferrante. den Ouden Gert Diffusion Bonding of Aluminum Oxide to Stainless Steel Using Stress Relief Interlayer. Materials Science and Engineering, 2002, 337(1–2): 287-296.

[4]

Colombo P, Riccardi B, Donato A, Scarinci G. Joining of SiC/SiCf Ceramic Matrix Composites for Fusion Reactor Blanket Applications. Journal of Nuclear Materials, 2000, 278(2–3): 127-135.

[5]

Aravindan S, Krishnamurthy R. Joining of Ceramic Composites by Microwave Heating. Materials Letters, 1999, 38(4): 245-249.

[6]

Ammar Ahmed, Elias Siores. Microwave Joining of 48% Alumina-32% Zirconia-20% Silica Ceramics. Journal of Materials Processing Technology, 2001, 118(1–3): 88-94.

[7]

Van De Voorde M, Nicholas M G. grange P, Delmon B. Development in High Temperature Materials Joining. Interfaces in New Materials, 1991 London: Elsevier Applied Science. 12-28.

[8]

Pereves S D. Joining Nitride Ceramics. Ceramics International, 1996, 22: 527-533.

[9]

Walls P A, Ueki M. Joining Sialon Ceramics Using Composite β-siialon-glass Adhesives. J. Am. Ceram. Soc., 1992, 75: 2491-2497.

[10]

Zheng J, nal OU, Akinc M. Green State Joining Silion Carbide Using Polycarbosilane. J. Am. Ceram. Soc., 2000, 83(7): 1687-1687.

AI Summary AI Mindmap
PDF

123

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/